Jump to content
RESET Forums (homeservershow.com)

Leaderboard

  1. schoondoggy

    schoondoggy

    Moderators


    • Points

      6

    • Content Count

      9,067


  2. cskenney

    cskenney

    Administrators


    • Points

      3

    • Content Count

      1,957


  3. Dave

    Dave

    Administrators


    • Points

      2

    • Content Count

      4,944


  4. Trig0r

    Trig0r

    Moderators


    • Points

      2

    • Content Count

      1,497


Popular Content

Showing content with the highest reputation since 11/27/2020 in Posts

  1. I would check all of your existing WD Reds to see if you have any that are SMR drives. SMR should not be an issue with DrivePool, but you never know. Even though WD owns Hitachi HGST I find their drives to be consistently good. Toshiba drives are good, specifically their NAS drives. Seagate NAS drives like IronWolf seems to be doing well. Best price per TB is buying WD externals and shucking them, but you can never be sure of what you will get. Depending on the drive model and the system you are putting them in, you may need to modify the 3.3v pin. I needed to add some drives to exis
    2 points
  2. This is the go to link you need with a tonne of information in for all things Gen10 Plus. https://www.servethehome.com/hpe-proliant-microserver-gen10-plus-ultimate-customization-guide/ I’ve not had any temp issues running an E-2246G and mine is under a good amount of load 24x7.
    2 points
  3. LSI is the manufacturer of the chip used many HBA's and RAID cards. The chip used on a card will determine features, functions and driver support.
    1 point
  4. The card you linked to appears to use a Marvell controller, generally not the best choice for Linux. LSI based cards work well with Linux and a card configured as 4i4e gives you four internal and 4 external drives: https://www.ebay.com/itm/IBM-LSI-SAS9212-4i4e-6G-SATA-SAS-Host-Bus-Adapter-HBA-46C8935-46C8934-46M0907/192562587005?epid=23002590603&hash=item2cd59fe57d:g:g5AAAOSwlCdbGpcb
    1 point
  5. 3.5" might be a push, one on top of the existing drives and one where the SDM would fit, you'd be better off looking at 2.5" drives. I didn't need cooling on the Supermicro card, its a load cooler than the HP unit.
    1 point
  6. I would remove one stick of RAM and try again, then try the other, it might be the new CPU doesn't like the existing RAM. Its only a guess though, sorry can't be more help.
    1 point
  7. I had the 4 drives in the bays connected to my addon card and then 2x SSD's connected to the onboard on an SDM for OS and VM storage, didnt require any additional cooling, however at one point I did have a P222 (I think it was) that got a bit warm so I had a small fan blowing over the heatsink to keep the card itself cool, the drives themselves don't really need it.
    1 point
  8. 1 point
  9. The RESET Dark Theme is back! Scroll all the way down to the bottom, tap Theme, Tap RESET Dark. Let me know if you see any major issues. If you would like to help out around here please disable your ad blocker for this site. I don't use anything nefarious. I load my own ads, like the RESET Podcast, or Stablebit DrivePool (which is awesome BTW) or I use Google Adsense. I also have Google Analytics for tracking site usage and I set cookies for your login. I have a JavaScript that turns links into commission links as well. That is SkimLinks. It's also getting low usage since Ama
    1 point
  10. If you look at the last page of this thread, a forum member converted the SDM R4 into a 3D printable:
    1 point
  11. Aye least I have got it half working, just fighting with the Raid Controller now Thanks for the guidance and the support. I would not have gotten this far without ya!
    1 point
This leaderboard is set to Indiana - Indianapolis/GMT-05:00
×
×
  • Create New...