By Mark Belanger
I'm new to the HPMSG8 world and so far I'm loving it. I have a stock Xeon with 16G of aftermarket memory with iLO patched to 2.70. Next up is adding a RAID card, so I can put my boot SSD on the onboard RAID. I picked up a LSI SAS9211-8i on Amazon, but am struggling to flash it to IT mode on the MicroServer. Is this even possible? Unfortunately, the only other system I have with PCI slots is 32-bit.
Any pointers would be greatly appreciated.
FYI, I have just installed Windows Server 2019 Standard (Desktop Experience) using the latest (WS2016) HP AMD chipset & VGA driver. Everything is recognised in Device Manager and stable.
I need to update the firmware on a HP Proliant Microserver Remote Access Card installed in my N40L.
Can someone please explain what I need to do to create a boot device that will update the firmware on the Remote Access Card?
after checking my ILo4, version2.61 on my Gen8 hp microservet, i saw an exclamation mark at cpld-pal0. It is now version 0x06.
i have read that there is an version 0x32.
anybody who has this version, and can provide me with a download link?
Attached my firmware configuration. Any suggestions for any updating? Think most is up to date?
Sorry can’t upload photo, error 200.