Jump to content
RESET Forums (homeservershow.com)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • MrEinstin
      By MrEinstin
      I want to rebuild my stock N54L. My preferred line of thinking is to use a PCIe X-16 card and about a 240Gb NVME M.2 SSD as my boot drive. I'm concerned about the BIOS seeing this though and being able to use it as a bootable device. Anyone tried something like this yet? I'm wanting to use all 4 drive cages for storage drives. I can't find anything in the bios regarding UEFI so I have to wonder if this is even possible or could there be a bios mod out there that would work?
       
      My alternative setup would wind up being a regular SATA SSD and replace the DVD drive with it. I'd rather the speed of the NVME PCIe setup though if its possible.
       
      Anyone?
       
    • Mark Belanger
      By Mark Belanger
      Greetings,
       
      I'm new to the HPMSG8 world and so far I'm loving it. I have a stock Xeon with 16G of aftermarket memory with iLO patched to 2.70. Next up is adding a RAID card, so I can put my boot SSD on the onboard RAID. I picked up a LSI SAS9211-8i on Amazon, but am struggling to flash it to IT mode on the MicroServer. Is this even possible? Unfortunately, the only other system I have with PCI slots is 32-bit.
       
      Any pointers would be greatly appreciated.
       
       
      -MB
    • npapanik
      By npapanik
      FYI, I have just installed Windows Server 2019 Standard (Desktop Experience) using the latest (WS2016) HP AMD chipset & VGA driver. Everything is recognised in Device Manager and stable.
    • TonyTheTechie
      By TonyTheTechie
      I need to update the firmware on a HP Proliant Microserver Remote Access Card installed in my N40L.
       
      Can someone please explain what I need to do to create a boot device that will update the firmware on the Remote Access Card?
       
      Thanks
       
      Tony Self


×
×
  • Create New...