Jump to content
RESET Forums (homeservershow.com)

Untangle router - talk to me


Recommended Posts

Pancakes

Okay, hardware.

 

What are you guys running?

 

My thoughts so far is that it will be either an Atom or a Ivy Bridge Celeron ITX board

 

RAM? How much is needed?

Hard Drive? Will a flash drive do?

NIC's? obviously 2 NIC's but is there any preference over brands?

Link to post
Share on other sites
  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

  • Pancakes

    11

  • ikon

    4

  • schoondoggy

    3

  • keeplearnin

    3

Top Posters In This Topic

Popular Posts

I thought I'd put something different into the mix.   I personally use a Cisco 2621XM router to double as firewall. You could get one used off eBay for cheap. On my setup, it's configured to do Zone

jcollison

For my pfsense router I use a Atom D525 with 4GB of RAM and a 30GB SSD.  Almost all of it was an over kill, but it runs well.

Link to post
Share on other sites

I heard somewhere a while back to stay away from USB NIC's and I'm not sure why.  I think it was just an extra complexity, driver issue, etc.

 

I use a refurb HP desktop. Pentium 4, 2GB RAM, 120GB spinner. Got it real cheap and tossed an extra NIC card into it.  I put a deal in the Deals forum a week or so ago with a refurb example that might work as a router.  It's no doubt expired but maybe an idea for you.

Link to post
Share on other sites
Pancakes

What are the hard drive requirements for Untangle? is an SSD actually better than a drive for it?

 

I would get an old P4 box, but since moving into my own place I now have to pay bills D: Including electric 

Link to post
Share on other sites

I thought I'd put something different into the mix.

 

I personally use a Cisco 2621XM router to double as firewall. You could get one used off eBay for cheap. On my setup, it's configured to do Zone-based Firewall. By default, it has two fastethernet interfaces built-in and a few empty slots for optional modules (WAN or LAN). You can add more ethernet interfaces using a suitable module.

 

Advantages:

1. Cheaper than setting up a PC - Old models like the 2621XM costs under $100

2. Low power consumption - I measured mine to take only about 20W

3. They're enterprise-grade and purpose-built appliances

 

Disadvantages:

1. Learning the CLI can be a bit steep if you're unfamiliar with Cisco IOS. But then, there's Google to help you out (or I can)*

2. Additional interface modules are Cisco proprietary and can be more expensive than a PC-based NIC

 

* I hold CCNA, CCDA, CCNP and CCIE certs.

Edited by oj88
  • Like 1
Link to post
Share on other sites
schoondoggy

I find smaller business computers from Dell, Lenovo and HP work well. The smallest have no slots so they are limited in Ethernet ports.

Here are some I have used;

http://www.geeks.com/details.asp?InvtId=OPTI-745DT-PD34-MAR-8R&cpc=RESX

http://www.geeks.com/details.asp?invtid=DC5700DT-PD34-MAR-R&cat=SYS

 

Most of these type of PC's use low profile cards. If you need to upgrade memory it can be pricey on old PC's.

Geeks.com is a good place to buy these. Check your local Craigslist. These systems always end up on CL.

As for HD's, if you want something fast and cheap, 80GB 10K for $20;

http://www.geeks.com/details.asp?invtid=WD800HLFS-NDW-R&cat=HDD

 

 

Many of the small form factor systems had room for a full size pci card. These quad 10/100 Matrox are Intel based $50;

http://www.ebay.com/itm/Matrox-10-100-Quad-PCI-Network-Card-NS-FNIC-4-NA-Card-355FE-NetApp-/140753315224?pt=US_Internal_Network_Cards&hash=item20c58d2598

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...