Jump to content
RESET Forums (homeservershow.com)

RocketRaid 2720 Flashing Cursor/No Boot (Solved)


Recommended Posts

upsidedowncake

For anyone that has helped me on the litany of other issues I have had, I ran in to one more.  I now have two Rocket RAID 2720SGL's so I can hook up 16 drives if needed.  When both cards were plugged in to my mono, and the RAID array I had all ready set up was in the system, the system wouldn't boot, no BIOS access, nothing.  All that would come up was a flashing cursor.  For once though, I am posting with a solution instead of a problem.  See the link below, all credit goes to the website obviously but hope this helps someone else with this problem.  Worked for me and my system is back up.

 

http://www.ebabble.net/highpoint-motherboards-a-flashing-cursor/

Link to post
Share on other sites

The INT13 issue has come up a number of times in the HSS forums, and there are posts about it. I'm sure about the other setting; don't recall anything about that. Thanks for posting the link.

Link to post
Share on other sites
upsidedowncake

No problem.  I actually found a topic in the HSS forums regarding the INT13 when I was looking around for a solution, but the links were broken to the support documents.  Figured I would just start a new thread.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...