Jump to content
RESET Forums (homeservershow.com)

The Home Server Show 182


Dave
 Share

Recommended Posts

Episode 182 is ready on YouTube. The audio should be published tomorrow. This is the first time I have done Google On Air Hangouts and it automatically publishes the video to YouTube. I've edited out the chat at the beginning and end so it's just like the audio portion.

 

Answer a few questions for me.

 

I would like to know if this is something you like and will watch.

Would you prefer this over audio?

In addition to audio?

Would you rather have a video feed just like the audio feed?

 

Granted, this episode is just a bunch of talking heads but we will get the hang of it and start sharing screens and showing some gear.

 

http://youtube.com/homeservershow

 

Feel free to subscribe and leave comments on the video.

 

Dave

Link to comment
Share on other sites

This is something I would watch but would still like the audio only option if I don't have time to watch the video or would like to listen to the podcast at work or on the road.

Link to comment
Share on other sites

Agree I would like to have both because its hard to drive and watch at the same time.

 

Only if you're trying to avoid accidents ;)

Link to comment
Share on other sites

Audio is all I will ever use. If you went video only I would have to stop downloading the show.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • Dave
    • Dave
      By Dave
      The SDM R4 is SOLD OUT!
       
       
      The SDM R4 is a bracket that facilitates mounting two additional 2.5″ drives in a HP MicroServer Gen8. There are also mounting holes for fans across the bottom to help cool RAID/SATA cards. The kit includes all the fasteners needed to install.
       
      With optional Stackers you can run four 2.5″ drives on the SDM R4. The SDM R4 will support four 9.5MM 2.5″ drives. If you want to run four drives on the SDM R4, you need to order SSB stacking brackets listed below. One set of SSB per drive pair, four drives will require two SSB kits. Because of the size of the SDM R4, if you are going to boot your server using the internal USB port, you will need to use a USB stick that is shorter than 1″. For more information on mounting instructions look here: http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
       

       

       
       
       
      The SDM R3.5 is in stock and ready to ship!
       
      The SDM R3.5 is a bracket that facilitates mounting one additional 2.5″ drive in a HP MicroServer Gen8. The kit includes all the fasteners needed to install.
      With optional Stackers you can run two 2.5″ drives on the SDM R3.5. The SDM R3.5 will support two 9.5MM 2.5″ drives. If you want to run two drives on the SDM R3.5, you need to order SSB stacking brackets listed below. One set of SSB per drive pair. For more information on mounting instructions look here:  http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
       
       
       

       

       
       
       
      SSB-9.5 for 9.5mm drives $10
       
      Schoondoggy Stacking Brackets can be used to stack two 2.5” drives. All screws are included
       

       

       
       
       
      SSB-7 for 7mm drives $10
       

       

       
       
       
      SOC-MSG8-R1 kit for 9.5mm optical drives to latch it in place. Screws included $9.
       

       

       
       
       
       
      The SDM R4 is SOLD OUT!
       
    • ICYDOCK_Chris
      By ICYDOCK_Chris
      Hey RESET listeners,
       
      We sponsored the most recent episode of RESET, and are hosting a giveaway to go along with it.  One lucky winner will receive the grand prize of a FlexiDOCK 4-bay model (MB524SP-B), and two runners-up will receive a FlexiDOCK 2-bay model (MB522SP-B).  Simply go to icydock.com/resetpodcast and enter code resetpodcast.
       
      There's only one week left to enter, so don't miss out!  Entries will be accepted until midnight 12/05/2017.  Additional entries can be had for liking our social media feeds, the more entries you have the higher chance you have to win!
       
      -Chris, ICY DOCK team.
    • Joe_Miner
      By Joe_Miner
      By: JohnStutsman
       
       
       

       
      Figure 1 – Preparing to install new 64GB of RAM
       
       
       
      I upgrade the stock 8GB to 64GB of RAM in the HPE ProLiant ML30 Gen9 using 4 DIMMs (“Sticks”) of Kingston KVR21E15D8/16.
       
       
       

       
      Figure 2 – Kingston KVR21E15D8/16
       
       
       

       
      Figure 3 – 64GB RAM about to be installed in HPE ProLiant ML30 Gen9
       
       
       
       
       
      Figure 4 – HPE ProLiant ML30 Gen9 – System Board Components & Memory “Type” requirement from “QuickSpecs” – DIMMs removal & installation instructions from “Maintenance & Service Guide” (see links in References below)
       
       
       

       
      Figure 5 – HPE ProLiant ML30 Gen9 – Memory & DDR4 memory population guidelines from “QuickSpecs” (see links in References below)
       
       
       
      I upgraded to 64GB of RAM in my HPE ProLiant ML30 Gen9 using Kingston KVR21E15D8/16 from Newegg. The KVR21E15D8/16 was suggested by Schoondoggy on the forum thread RAM for ML30 Gen9.
       
       
       
       
      Video 1 – 64GB RAM in HPE ProLiant ML30 Gen9.
       
       
       

       
      Figure 6 – View of the four new DIMMs installed for 64GB of RAM. Time to replace the air baffle, tower bezel, and side panel then hook up the ML30 Gen9 and see if it works!
       
       
       
       
       

       
      Figure 7 – IT WORKS! Screen during first post showing 64GB RAM - for the first time!  Thank you Schoondoggy!!
       
       
       

       
      Figure 8 – System Summary Information showing 64GB RAM installed
       
       
       

       
      Figure 9 – System Information with Installed Physical Memory (64GB RAM) Highlighted
       
       
       

       
      Figure 10 – Task Manager showing 64GB of DDR4.
       
       
       

       
      Figure 11 – iLO4 System Information – Memory Information showing four 16GB DIMMs installed.  Status is "Good, In Use".
       
       
       

       
      Figure 12 – Temperatures appear well within range while system fan speed was a consistent 6% - BIOS set to Optimal Cooling (Note that the two 40mm fans in the Icy Dock ToughArmor MB994SP-4SB-1 were also running).
       
       
       

       
      Figure 13 – HPE ProLiant ML30 Gen9 running with 64GB RAM and using 30.1 Watts. Everything seems to be working well – time to think about adding more drives and turn on Hyper-V!!
       
       
       
      As-Built (I named my Computer: Serenity)
      HPE ProLiant ML30 Gen9 (Product No. 830893) Xeon E3-1240v5 (SkyLake LGA 1151) 64GB ECC RAM – Kingston KVR21E15D8/16 OS: Windows 10 Pro B140i Dynamic Smart Array: Ports 1-4: (4*3.5” Drive Tray Caddies for Main Drive-Cage Assembly Bays 1-4) B140i Dynamic Smart Array: Ports 5-6: Icy Dock MB994SP-4SB-1 in Top 5.25” half-height Bay; with/ 2*18” SATA III (6 Gb/s) cables attached to Bays 1 & 2 (Bays 3 & 4 are available for future); Molex to Molex & Fan Y-Connector Cable; Samsung 840 Pro 256GB in Bay 1;  
       
      Please join us in the HomeServerShow Forums to discuss this and tell us what you are building at home.
       
       
       
      Reference:
       
      RAM for ML30 Gen9 http://homeservershow.com/forums/index.php?/topic/14807-ram-for-ml30-gen9/
       
      ValueRAM Decoder https://www.kingston.com/us/memory/valueram/valueram_decoder
       
      ValueRAM KVR21E15D8/16 Specs Sheet http://www.kingston.com/dataSheets/KVR21E15D8_16.pdf
       
      Check HSS Forum Post: Other HSS ML30 Blog Postings: http://homeservershow.com/tag/ML30
       
      HomeServerShow Forum for ML10’s & ML30’s http://homeservershow.com/forums/index.php?/forum/98-ml10-and-ml10v2/
       
      HPE ProLiant ML30 Gen9 Server Maintenance & Service Guide http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04905980-1.pdf
       
      HPE ProLiant ML30 Gen9 Server QuickSpecs http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=c04834998&doctype=quickspecs&doclang=EN_US&searchquery=&cc=us&lc=en
    • Dave
      By Dave
      Panos Panay just wowed the Microsoft crowd with two incredible hardware reveals. The first was the SurfaceBook i7 with a whopping 16 hours of battery life.  The second was Surface Studio. I dare you to call it an "All in One" after today.
       
      I'll be chatting about all this gear on my new podcast, RESET. Find it here: mccabe.io
       
       
       

       
      Surface Studio
       
      The specs of Studio are impressive but visually it is stunning. It has 28" of wow that can be manipulated to however you prefer to create.
       

       
      Screen: 28" PixelSense Display
      Resolution: 4500 x 3000 (192 DPI)
      Color settings: Adobe sRGB, DCI-P3 and Vivid Color Profiles, Individually color calibrated
      Touch: 10-point multi-touch
      Aspect Ratio: 3:2
      Surface Pen
      Zero Gravity Hinge
      Quad-core 6th Gen Intel Core i5 or i7
      NVIDIA GeForce GTX 965M 2GB GPU GDDR5 memory or NVIDIA GeForce GTX 980M 4GB GPU GDDR5 memory
       
      It looks like a creative persons dream machine.  Apple picked a bad week to follow Microsoft when it comes to hardware reveals.  I personally would like to try the Studio and Dial with some video editing software.  I think it will be great for that.
       
      Look at the Microsoft Store online for more photos.  It really is a nice looking Surface. Link Here.
       
      Surface Book
       
      The Surface Book is plain and simple; More.  More graphics and more battery.  It's a little heavier and starts at 3.6 pounds where last year's Surface Book was 3.3 pounds.  Maybe it's the new 6th Gen Intel Core i7 or the i7: NVIDIA GeForce GTX 965M with 2GB of GDDR5 memory.  That's nice but Panos stated they just put in more battery!  It's nice to see that.  Adds a little weight but for those that want the battery life it's a welcome change.
       

       
       
       
      Surface Dial
      The Dial is impressive.  It's compatible with any Windows 10 enabled PC, laptop, or tablet as long as it has the Anniversary Update.  Don't try this with your Surface Pro but it will stick to the screen of the Surface Studio!  It will have optimized off screen compatibility with Surface Book and SP4.
       
      It's a jog dial on steroids and Panos and software partners demo'd many uses of it. Color wheel, zoom in, etc.  It's $99 and can be purchased now for delivery on November 10th.
       

       
      Thanks for shopping with my links.  Maybe I can get one too!
×
×
  • Create New...