Jump to content
diehard

STORAGE BAD: Western Digital DX4000 Small Office Storage Server

Recommended Posts

diehard

Hi Guys,

 

I'll be updating this post as things change.

 

As a Microsoft Windows Home Server MVP, a few months back, I found out from my Microsoft Team Leader that Western Digital would soon be releasing the DX4000 Small Office Storage Server. And that I should contact Western Digital to see if I can get a unit for review. I did. Thanks Western Digital. :D

 

The DX4000 comes with the Windows Storage Server 2008 R2 Essentials software. I'll write a few post on this in the future, so look for that. I'll also tweet when I do and discuss it on future podcasts.

 

So, on the the nitty gritty of why I'm writing this post.

Let me start by saying that if you know me, I like to bang on my server until something breaks, and then figure out how to fix it. This also helps the community just in case you unfortunately find yourself with the same issue.

 

So this post is not to say how Western Digital's product is flawed in some way.

 

OK, so while putting the screws to this box, I successfully managed to kill it to a point where I was getting a "STORAGE BAD" error on the LCD display. Not fun at all. Repeated reboots didn't resolve this. Things were looking grim. So as the type of guy I am, break first, then read the instructions to find a fix, I turn to the User Manual, http://www.wdc.com/w...4779-705064.pdf

 

 

 

UPDATE:

 

Ok, so after refering to the pdf and getting a reply from an email to Western Digital ( thanks for that WD), I found out that I messed up the RAID array. Time to rebuild the array.

 

How do you do this with a headless box with no access to the BIOS or OS ?

Since this box is headless, WD allows you to download a full copy of the OS that includes a few options. According to the pdf, you create a bootable USB stick <512 meg and boot off of that. Then you will get some details from the LCD screen as to your progess. It look 7 hours to rebuild the drives, OUCH that took a while. But in the end, of course it worked.

 

Then I wanted to reinstall the OS. That involves a similar process to the making the repair RAID USB stick, but you need a 8GB stick because it will hold the OS. ( This is similar to how it's done with the MediaSmart Server but the OS is on the USB stick instead of the PC.)

 

So now I'm all up and running fine.

 

Now to try and break it with some Add-ins.

 

If you have any questions on the Western Digital's DX4000, I'll give support on this box as long as I can until I have to return it.

 

Soon to be continued..... :ph34r:

Share this post


Link to post
Share on other sites
jmwills

So that's what that little book is for???

Share this post


Link to post
Share on other sites
ImTheTypeOfGuy

You're a nut. I bet you are like a kid in a candy store. Have fun.

Share this post


Link to post
Share on other sites
unrealshots

hey John,

 

the $64,000 question is - would you recommend a WD4000?

 

My wifes' works WHS v1 threw a disk today, and after several hours, I've recovered all bar a few files from the failed drive...

 

first port of call will be to replace the dead disk, and get the v1 box running again, but looking for a longer term fix... I've had my eye on a WD4000 for some time, and now it's quite an attractive option at $1530 for a 6TB model...

 

I know I could buy a N40L and jack it up to 8GB RAM, but by the time I got a RAID controller and and 3x 3TB or 4x 2TB disks, and put it together, the WD4000 is cheaper!

 

your thoughts?

 

Cheers,

 

Andrew

Edited by unrealshots

Share this post


Link to post
Share on other sites
ikon

Andrew, quick question: I'm wondering why you're fixing your wife's employer's WHS? Don't they have a contract with someone to look after their IT, or is that you? :)

Share this post


Link to post
Share on other sites
Helzy

I've got one. Set it up, went to transfer some data via the USB 3 port - dead. Had transferred multiple terabytes of data on to it via network and set it free in a semi-production environment. NIC's drop their IP every few days,.  For the USB 3 problem, WD will not ship me a mainboard even though it was days old. THey wanted me to pack the whole effing thing up and send it to them. No thanks. Bought a 16TB DS6100 at the same time. Second time restarting it after setup, one of the boot drives lost it's config. 8 hours later to rebuild the boot volume...

 

Meh not impressed with these units. Definitely not impressed with WD policy of no cross shipping. I even offered them a credit card to ensure the core return. Nope, pack it up and send it at my own expense to them. Will not buy another.

Share this post


Link to post
Share on other sites
Yiw Keong

Dear diehard,

 

I was counter same issue 'Storage Bad' . Initial my last DX4000 hardware failure , it keep restart when 'startup initiallzation' . I was email to WD support team, they advised bought same model DX4000 and migrate 4 (2TB) drives into new DX4000. I was follow those step, but DX4000 LCD screen show 'Storage Bad' . Can you advise , how can I fix my issue ? Thanks in advance

 

 

Below step provided by WD support team:

 

Counter issue during Step 16 - 17, when I go back my PC click Next system not found DX4000 server and DX4000 show 'Storage Bad'.

 

I was capture video as below:

https://www.dropbox.com/s/nopn2nm1hcmpunv/VID_20151121_110442.mp4?dl=0

 

 

Based on the error, it seems that the device is unable to boot up to its OS.

 

We would like to suggest you to perform a system recovery.

 

Please follow the steps below:

 

1. Connect the PC and Sentinel to the same router/network . Make sure both devices are on the same network.

2. Download the ISO from support.wdc.com to the PC.

 

http://support.wdc.com/product.aspx?ID=1601&lang=en

 

3. Unzip the ISO.

4. Connect 16GB USB drive to PC. The USB thumb drive should only be 16 or 32.

 

SPECIAL NOTE: http://wdc.custhelp.com/app/answers/detail/a_id/9889

Based on our USB compatibility tests, the following limitations have been found:

 

1. The USB Flash Drive must be a USB 2.0 flash drive (not USB 3.0).

2. Despite what the message says, The USB Flash Drive must have a capacity of 16 GB or 32 GB in size.

3. A USB Flash Drive with a storage capacity greater than 32 GB will not work.

 

5. Run the setup.exe from the ISO recovery file you unzipped.

6. Choose 3rd option ---- do system recovery.

7. The setup.exe will scan for the USB drive. Once it finds USB drive, click next to erase drive and burn the recovery ISO file to the drive.

8. After the setup is finished, do not close the setup page on your computer. Leave the page open in your PC.

9. Disconnect the USB drive from your PC.

10. Make sure you have turned off the sentinel first before following the below procedures.

11. Connect the USB drive to the Sentinel.

12. Hold the reset button of the Sentinel using a paper clip.

13. While holding the reset button, power on the Sentinel.

14. Once you see the message 'Loading Recovery' on the LCD panel of the Sentinel, release the reset button.

15. Once you see recovery started on LCD, go back to setupexe window on your computer and then click Next.

16. Setupexe will scan the local network for the Sentinel.

17. Once setupexe finds the Sentinel, it gives you options.

18. Restore to a backup or factory restore.

19. Choose factory restore.

20. It will ask to reinstall system only, reset to factory settings without deleting the data OR a full factory reset which will delete everything then reinstall the system.

21. Choose the first option that will not affect the data. Setup will ask you to confirm everything you want to do

22. Once confirmed, then click Next.

23. It will take 3-8 hours to do recovery. Make sure your computer will not go to sleep mode.

24. It will reboot for several times.

25. After you can see the IP address on LCD monitor which means the recovery is done.

image.jpg

image.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • diehard
      By diehard



      Looks like Western Digital's DX 4000 supports only 3 models of hard drives.

      http://www.manualowl.com/m/Western%20Digital/WDBLGT0080KBK/Manual/237696?page=13
    • diehard
      By diehard
      FYI.
       
       
       
       
      My backup to the Western Digital DX4000 failed. Since this is a headless server, it's nice to see that the LCD shows the warning. It hasn't cleared off the LCD, which is good, because you always have that message staring you in the face to fix it.
       
      Hopefully it will when the backup is fixed.


×