Jump to content
RESET Forums (homeservershow.com)
diehard

Modified BIOS for Microserver N40L enables hidden features

Recommended Posts

Trig0r

The HP MS G8 only has 7 SATA ports (the 7th is reserved for CD drive, but also can be used otherwise).

Am I going blind, have only seen 1 SATA port on mine not including the 4 drive bays, where are the other 2?

Share this post


Link to post
Share on other sites
Patschi

Oh, I'm such an idiot... Ofcourse there are only a total of 5 SATA ports... Somehow I typed the wrong number in. Sorry for the inconvenience!

Share this post


Link to post
Share on other sites
Trig0r

Damn it, got excited then thought there were some tucked away somewhere :lol:

Share this post


Link to post
Share on other sites
ikon

You don't actually need the original HP BIOS file itself. What you need is the flashing tools. You also need to name the modded BIOS file correctly, so the flashing tools can find it.

  • Like 1

Share this post


Link to post
Share on other sites
Essexraptor

Thanks - But where can I now get the original latest HP BIOS I need for it ?

Look in post #1..... Diehard has kindly made the bios available via his skydrive. Download and save !!!!

Edited by Essexraptor

Share this post


Link to post
Share on other sites
Warlord1981

Hello there, thank u for your hard work ive been having my server with your modded bios since the moment i bought it. now i have to sell it though and i was wondering how do i flash back the original BIOS, because i dont want the new owner to have any problems with warranty etc.

 

thank you :)

Share this post


Link to post
Share on other sites
Warlord1981

I downloaded sp64420.exe and followed the instructions here:

but when system enters syslinux and tried to run rompaq it gives the error: command or filename not recognized.

the microserver currently has the first modded bios.

Share this post


Link to post
Share on other sites
jmwills

Di you by chance rename the rom?

Share this post


Link to post
Share on other sites
ikon

As I mentioned above, it's critical to name the ROM file correctly or the flashing program won't be able to find it.

Share this post


Link to post
Share on other sites
satego

Look in post #1..... Diehard has kindly made the bios available via his skydrive. Download and save !!!!

 

 

Mhh sorry but on the Skydrive from DieHard - there I only see the SP54344 .... But isnt the latest something with SP64..... ?

Hi all,

 

sorry again me .... Its really a bit confusing - Or I am too stupid.....

Quick question - for the N54L - Is it the same MOD Bios from Dia Hards Skadrive or is there an otherone to be used ?

(I just got a cheap offer for an N54L and I will upgrade)

 

Thanks a lot

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • AnthonyB
      By AnthonyB
      New BIOS for Gen 8 Server now available that resolves Spectre vulnerability. My server is out of warranty. Anyone able to download and share?
       
      ** CRITICAL ** Online ROM Flash Component for Windows x64 - HP ProLiant MicroServer Gen8 (J06) Servers
      https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5390291&swItemId=MTX_13916b9b87d642bc91029439b8&swEnvOid=4184
       
      Version:2018.01.22 (5 Mar 2018)
      Fixes Upgrade Requirement:
      Critical - HPE requires users update to this version immediately.
       
      Important Notes:
      This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM does NOT have issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.
      Firmware Dependencies:
      None
      Problems Fixed:
      Updated the Intel processor microcode to the latest version.
      Known Issues:
      None
    • DaMenace
      By DaMenace
      I have a simple question about my BIOS from iLo4. Look at the picture and you will see a difference in the System ROM and Backup ROM dates.

    • bennybennybenny
      By bennybennybenny
      Hey guys,
      Not sure if this is the correct section to post this, but in a bit of a pickle after attempting to flash my HP Microserver N40L to the modified bios last night.
       
      The story goes - I've had myN40L microserver for the past few years running Windows 8.1 and acting as a media server for the house. I recently upgraded a laptop I have so had a spare Samsung 840 EVO 120gb SSD that I thought I'd throw in the microserver as the boot drive. 
       
      I ghosted the existing windows install (which was on a 250gb mechanical hard drive) over to the SSD, rebooted the computer and everything was working file. When I checked the performance of the SSD using the Samsung Magician software it indicated thatt the SSD wasn't running at full speed due to AHCI being disabled. I then did a bit of research and found that SATA port 5 (normally meant for an optical drive) that the SSD was connected to doesn't run at full speed and in IDE mode. I read that the modified bios that's floating around for Microserver's can fix this.
       
      So I flashed the bios to my machine however now when I boot up it gets to the loading screen for windows and then errors and reboots. This boot loop just continues constantly with no way to get into windows.
       
      I've tried setting the hard drive mode to both IDE and AHCI in BIOS with no success, I've reverted the BIOS back to default settings, took out the CMOS battery overnight, tried to re-flash back to default HP firmware, re-flashed the modded BIOS with no drives in the server and even run the windows 8 startup repair with no success whatsoever, it just continues to error and boot loop.
       
      I did leave all 4 of my other SATA hard drives in the machine when flashing the modded bios originally so don't know if this affected it. I wish I'd just left the original BIOS on there now.
       
      Is there anything I can try to fix this? I'd really prefer not to have to reinstall windows 8 as it took me awhile to set everything up for media (Sonarr, CouchPotato, iTunes, Serviio etc).
       
      Any help is greatly appreciated.
       
      Cheers Benny
    • felt
      By felt
      Bought this ML10v2 a few months ago and have been hitting wall after wall, frustrated- putting it away for a few weeks, and then trying again. I can not get it to boot from a USB and have not figured out how to recognize and identify drives!
       
      I have gotten iLO4 working with a valid key, I have updated the SPP, registered on who knows how many HP/HPE pages, looked through the documentation- but still can't get the machine to boot to my Linux USB for installation.
       
      This seems like a basic step, but I've kind of lost my objectivity at this point and wanted to ask for help. Is there something I need to do in iLO4 to have it recognize the install media or my drives? I can't seem to make sense of the Virtual Media field.
       
      I want to install Ubuntu 16.04 Server- HP/SPP says it supports Canonical. How do I get the machine to 1) open into BIOS? is it F2/F9/F10/F11 during boot? My POST sequence never seems to get past 10%, and then 2) recognize my hard drives, no matter what number SATA cable, it doesn't see them. I can only open the iLO4 manager from another computer on my network, so I can't open it on local host like the (very helpful) Joe Stutsman videos and instruction guides suggest.
       
      Anyhow, any input on this configuration would be appreciated. I know I'm missing something, but want to exhaust all options before I return this.
       
    • nlitend1
      By nlitend1
      I upgraded 2 identical systems (both running windows 7) to SSDs and restored images via WHS 2011 and noticed that one of the systems is not running AHCI mode (according to AS SSD benchmark and device manager). I made the 2 registry changes already in windows according to this guide....
      http://www.sevenforums.com/tutorials/61869-ahci-enable-windows-7-vista.html   I then made sure that the BIOS had SATA configured as AHCI (and not IDE). After reboot, I did not get prompted to install the AHCI drivers and the performance is significantly less with the system that appears to be running in IDE mode.   The following are two strange things:  1. Changing the BIOS setting to AHCI or IDE never gives me a BSOD. 2. Stablebit scanner states that both TRIM and NCQ are both working on the SSD and from what I can tell NCQ cannot run without AHCI mode.   This system apparently appears to be "stuck"... in what appears to be IDE mode...Any ideas on what to try at this point? Am i looking at a clean install or even worse... corrupted BIOS?    Thanks!   nlitend1


×
×
  • Create New...