Jump to content
RESET Forums (homeservershow.com)
diehard

Modified BIOS for Microserver N40L enables hidden features

By diehard, in Microserver N54L, N40L, Etc

Recommended Posts

drapsag    0

drapsag
Posted

Use this link to create the bootable thumb drive http://cvscorp.homes...ey%20Media).exe but replace and rename the BIOS bin file with the one from BIOS-MODS.

 

You should only have to reboot the server with the thumb drive and it will do all the work.

 

Look under the tab for Southbrige stuff there is a lot of stuff there. That's where I found stuff for the ESATA port to recognise my DROBO.

 

Hi

 

the link isn't valid anymore, where can I find this executable?

Share this post

Link to post
Share on other sites

cskenney    150

cskenney
Posted

Hi

 

the link isn't valid anymore, where can I find this executable?

That link still works for me.

Share this post

Link to post
Share on other sites

diehard    42

diehard
Posted

I find the cvscorp site goes up and down. I copied all their files to my PC for future use.

Share this post

Link to post
Share on other sites

ikon    438

ikon
Posted

I find the cvscorp site goes up and down. I copied all their files to my PC for future use.

 

Smart man. Better to have them available locally anyway IMHO.

Share this post

Link to post
Share on other sites

mattd390    8

mattd390
Posted

The darn link is down again... DOH!

Share this post

Link to post
Share on other sites

heathj    0

heathj
Posted

Hi,

 

Can I ask the forum for some guidance please?

 

I have carried out the bios mod to my N40L as I am about to install an SSD for the OS. With ports 4 and 5 now running at 3 Gbps, am I going to cause any performance issues if I install a bluray drive (rated at 1.5Gbps) onto port 5?

 

Many thanks

Share this post

Link to post
Share on other sites

yodafett    97

yodafett
Posted

No, Sata spec auto negoiates down per device

Share this post

Link to post
Share on other sites

heathj    0

heathj
Posted

Many thanks,

Share this post

Link to post
Share on other sites

diehard    42

diehard
Posted

I just tried it and it's working.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • E3000
      Latest Gen8 Firmware Versions?
      By E3000
      Hey guys,
       
      As of June 2020, what are the latest versions of firmware for HP Microserver Gen8 to be installed on the system itself? Also do any other components have updatable firmware/os-independent software?
       
      So far my list is as follows:
      BIOS - J06 (04/04/2019) iLO 4 - v2.73 (11/02/2020) Intelligent Provisioning - v1.71 (20/02/2019)  
      and I guess the following could also be added (although both out of date):
      Smart Update Manager (HP SUM) - v8.1.0 (21/12/2017) Service Pack for ProLiant (06/11/2017)  
      Date formated as DD/MM/YYYY.
       
      I believe all the B120i Smart Storage stuff is part of Intelligent Provisioning.
    • AnthonyB
      ProLiant MicroServer Gen8 (J06) Server BIOS 2018.01.22 (5 Mar 2018)
      By AnthonyB
      New BIOS for Gen 8 Server now available that resolves Spectre vulnerability. My server is out of warranty. Anyone able to download and share?
       
      ** CRITICAL ** Online ROM Flash Component for Windows x64 - HP ProLiant MicroServer Gen8 (J06) Servers
      https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5390291&swItemId=MTX_13916b9b87d642bc91029439b8&swEnvOid=4184
       
      Version:2018.01.22 (5 Mar 2018)
      Fixes Upgrade Requirement:
      Critical - HPE requires users update to this version immediately.
       
      Important Notes:
      This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system updates, provides mitigation for Variant 2 of the Side Channel Analysis vulnerability, also known as Spectre. The revision of the microcode included in this System ROM does NOT have issues with more frequent reboots and unpredictable system behavior which impacted the previous Intel microcode which was part of the Spectre Variant 2 mitigation. Additional information is available from Intel’s Security Exploit Newsroom, https://newsroom.intel.com/press-kits/security-exploits-intel-products/.
      Firmware Dependencies:
      None
      Problems Fixed:
      Updated the Intel processor microcode to the latest version.
      Known Issues:
      None
    • DaMenace
      BIOS Question
      By DaMenace
      I have a simple question about my BIOS from iLo4. Look at the picture and you will see a difference in the System ROM and Backup ROM dates.

    • bennybennybenny
      HP Microserver N40L won't boot after BIOS update
      By bennybennybenny
      Hey guys,
      Not sure if this is the correct section to post this, but in a bit of a pickle after attempting to flash my HP Microserver N40L to the modified bios last night.
       
      The story goes - I've had myN40L microserver for the past few years running Windows 8.1 and acting as a media server for the house. I recently upgraded a laptop I have so had a spare Samsung 840 EVO 120gb SSD that I thought I'd throw in the microserver as the boot drive. 
       
      I ghosted the existing windows install (which was on a 250gb mechanical hard drive) over to the SSD, rebooted the computer and everything was working file. When I checked the performance of the SSD using the Samsung Magician software it indicated thatt the SSD wasn't running at full speed due to AHCI being disabled. I then did a bit of research and found that SATA port 5 (normally meant for an optical drive) that the SSD was connected to doesn't run at full speed and in IDE mode. I read that the modified bios that's floating around for Microserver's can fix this.
       
      So I flashed the bios to my machine however now when I boot up it gets to the loading screen for windows and then errors and reboots. This boot loop just continues constantly with no way to get into windows.
       
      I've tried setting the hard drive mode to both IDE and AHCI in BIOS with no success, I've reverted the BIOS back to default settings, took out the CMOS battery overnight, tried to re-flash back to default HP firmware, re-flashed the modded BIOS with no drives in the server and even run the windows 8 startup repair with no success whatsoever, it just continues to error and boot loop.
       
      I did leave all 4 of my other SATA hard drives in the machine when flashing the modded bios originally so don't know if this affected it. I wish I'd just left the original BIOS on there now.
       
      Is there anything I can try to fix this? I'd really prefer not to have to reinstall windows 8 as it took me awhile to set everything up for media (Sonarr, CouchPotato, iTunes, Serviio etc).
       
      Any help is greatly appreciated.
       
      Cheers Benny
    • felt
      Looking for basic setup guide for my ML10v2
      By felt
      Bought this ML10v2 a few months ago and have been hitting wall after wall, frustrated- putting it away for a few weeks, and then trying again. I can not get it to boot from a USB and have not figured out how to recognize and identify drives!
       
      I have gotten iLO4 working with a valid key, I have updated the SPP, registered on who knows how many HP/HPE pages, looked through the documentation- but still can't get the machine to boot to my Linux USB for installation.
       
      This seems like a basic step, but I've kind of lost my objectivity at this point and wanted to ask for help. Is there something I need to do in iLO4 to have it recognize the install media or my drives? I can't seem to make sense of the Virtual Media field.
       
      I want to install Ubuntu 16.04 Server- HP/SPP says it supports Canonical. How do I get the machine to 1) open into BIOS? is it F2/F9/F10/F11 during boot? My POST sequence never seems to get past 10%, and then 2) recognize my hard drives, no matter what number SATA cable, it doesn't see them. I can only open the iLO4 manager from another computer on my network, so I can't open it on local host like the (very helpful) Joe Stutsman videos and instruction guides suggest.
       
      Anyhow, any input on this configuration would be appreciated. I know I'm missing something, but want to exhaust all options before I return this.
       


×
×
  • Create New...