Jump to content
RESET Forums (homeservershow.com)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • Dave
    • Dave
      By Dave
      The SDM R4 is SOLD OUT!
       
       
      The SDM R4 is a bracket that facilitates mounting two additional 2.5″ drives in a HP MicroServer Gen8. There are also mounting holes for fans across the bottom to help cool RAID/SATA cards. The kit includes all the fasteners needed to install.
       
      With optional Stackers you can run four 2.5″ drives on the SDM R4. The SDM R4 will support four 9.5MM 2.5″ drives. If you want to run four drives on the SDM R4, you need to order SSB stacking brackets listed below. One set of SSB per drive pair, four drives will require two SSB kits. Because of the size of the SDM R4, if you are going to boot your server using the internal USB port, you will need to use a USB stick that is shorter than 1″. For more information on mounting instructions look here: http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
       

       

       
       
       
      The SDM R3.5 is in stock and ready to ship!
       
      The SDM R3.5 is a bracket that facilitates mounting one additional 2.5″ drive in a HP MicroServer Gen8. The kit includes all the fasteners needed to install.
      With optional Stackers you can run two 2.5″ drives on the SDM R3.5. The SDM R3.5 will support two 9.5MM 2.5″ drives. If you want to run two drives on the SDM R3.5, you need to order SSB stacking brackets listed below. One set of SSB per drive pair. For more information on mounting instructions look here:  http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
       
       
       

       

       
       
       
      SSB-9.5 for 9.5mm drives $10
       
      Schoondoggy Stacking Brackets can be used to stack two 2.5” drives. All screws are included
       

       

       
       
       
      SSB-7 for 7mm drives $10
       

       

       
       
       
      SOC-MSG8-R1 kit for 9.5mm optical drives to latch it in place. Screws included $9.
       

       

       
       
       
       
      The SDM R4 is SOLD OUT!
       
    • Henrik
      By Henrik
      Hi Community,
       
      First, my specs (briefly):
      MicroServer Gen10
      AMD Opteron X3216
      Win Server 2016
      [...]
       
      Problem:
      The Taskmanager shows only 1 CPU-core instead of 2.
      (ref. image 1)
       
      Solutions tried:
      checked msconfig...no CPU-Limit set checked, whether other users see the same amount of CPU-cores in task-manager (ref. image-link (internal) 2)  
      Anyone out there with an idea to solve this?
       
      Greets
      Henrik
       

    • Sug7
      By Sug7
      Hi Guys,
       
      New member here, some great info on this forum so hopefully a few of you have experience with the Intel E3-1260L CPU running in a HP Microserver Gen8? 
       
      I know for sure it will work as I’ve seen some good threads on here but can anyone tell me if the upgrade made a noticeable difference in the fan speeds and noise?  
       
      Im looking at putting two Gen8’s in a living room in place of an old N54L so cautious of too much noise..
       
    • Orion
      By Orion
      I am building a Ryzen machine. Using the new Ryzen 7. What is the best ram to use. Obviously ddr4. And recommendations on brand and size


×
×
  • Create New...