With the size of hard drives these days are more then a 2-bay NAS really needed? How do you all decide how many drive bays are needed??
Thanks in advance.
View full post
The SDM R4 is SOLD OUT!
The SDM R4 is a bracket that facilitates mounting two additional 2.5″ drives in a HP MicroServer Gen8. There are also mounting holes for fans across the bottom to help cool RAID/SATA cards. The kit includes all the fasteners needed to install.
With optional Stackers you can run four 2.5″ drives on the SDM R4. The SDM R4 will support four 9.5MM 2.5″ drives. If you want to run four drives on the SDM R4, you need to order SSB stacking brackets listed below. One set of SSB per drive pair, four drives will require two SSB kits. Because of the size of the SDM R4, if you are going to boot your server using the internal USB port, you will need to use a USB stick that is shorter than 1″. For more information on mounting instructions look here: http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
The SDM R3.5 is in stock and ready to ship!
The SDM R3.5 is a bracket that facilitates mounting one additional 2.5″ drive in a HP MicroServer Gen8. The kit includes all the fasteners needed to install.
With optional Stackers you can run two 2.5″ drives on the SDM R3.5. The SDM R3.5 will support two 9.5MM 2.5″ drives. If you want to run two drives on the SDM R3.5, you need to order SSB stacking brackets listed below. One set of SSB per drive pair. For more information on mounting instructions look here: http://homeservershow.com/forums/index.php?/topic/5960-hp-ms-g8-25-drive-bracket-revision-history-new-rev-35-and-rev-4-info/?p=137922
SSB-9.5 for 9.5mm drives $10
Schoondoggy Stacking Brackets can be used to stack two 2.5” drives. All screws are included
SSB-7 for 7mm drives $10
SOC-MSG8-R1 kit for 9.5mm optical drives to latch it in place. Screws included $9.
The SDM R4 is SOLD OUT!
I've been banging my head for a few days now trying to figure this out and I've run out of ideas. Hoping the very intelligent crew here can help me out.
I have a Drobo 5N and a Synology RS816 on my network, both of which have been working without issue for quite some time now. I've always connected to both via Windows Explorer by simply going to the network address i.e., \\N5 and \\SYN (sample names).
I recently got a new desktop which is where the issues are coming up. When I try to go to \\N5, it results in a message saying it cannot find that location. However, \\SYN works just fine. What's strange is that I can see and manage the Drobo through the Drobo Dashboard software. What could be preventing Windows from seeing the Drobo on the network?
I've already enabled the SMB 1.x protocol, ensured the workgroup names are the same, rebooted both the machine and the Drobo, made sure network sharing is enabled, and even did a fresh install to ensure that some program I installed didn't cause the issue. Every other machine I have can access the Drobo without issue. It's just this new desktop, and everything is running Windows 10.
Another strange phenomenon that I discovered is that if I go to "\\DROBO" (verbatim, not a sample name) it leads me to the Synology. Where is Windows getting the mapping from that it is directing that address to the Synology?
This is driving me nuts so any advice would be greatly appreciated.
Synology C2 Backup Now Available to US Customers
This is a data backup service that Synology released to EU customers last year. I remember trying to get it to install and it wouldn't take my CC# because of location. Fair enough, will it now and how much will it cost?
Seriously, how much is it? Ask Google and on March 25th, 2018 it's $14.12. That's still not a bad price for 100Gb of backup with versioning. Also not bad to consider this as a secondary cloud backup. (See below for pricing)
One thing to keep in mine this is a service that falls under Hyper Backup and not Cloud Sync. The two are very different. This will be a true back with versioning and not a simple synchronization of a folder in a cloud service like dropbox. Many a mistake have been made with sync pairs and cloud services! That won't happen with backup and versions.
Enable it and Back Up
In your Synology DSM go to Hyper Backup. Install if you are not using it. You would also use this app to backup to USB, Amazon S3, Microsoft Azure, etc.
Select Synology C2 Cloud Backup.
That should launch a login portal. If you have used Synology services before and have a login you can use those credentials or create credentials right here.
Start your free trial for 30 days but prices are still in POUNDS! That's a pound symbol right? If it was released to Europe why isn't it in Euros? I'm so confused. (it is Euro Dave! I had a brain fart on the Euro symbol. See response post below. Embarrassingly laughing at myself on this!)
It's here where it wouldn't let me proceed last time I tried due to it being a limited trial to EU customers only. You have to put your CC# in to get the 30 day free trial. It says i'm in the Europe Frankfort market but the purchase went through. So, does this mean if the US sinks into the Ocean and all my data goes with it, my photos will be in Frankfort safe and sound? Sweet!
This is the last web screen I see as it has now taken me back to Hyper Backup.
I'm going to choose a small amount to get started with.
I'm also going to limit the bandwidth of the backup and set Client Side encryption. The encryption password box will allow you to use the Admin account password so you don't forget what you put here unless your Admin password is less than 8 characters.
Once you are finished it will ask you if you want to backup now. I said now just to keep the network clean while I'm working but it will backup tonight. Look at the screen shot below. See the little arrow by Synology C2? That is the link to the web portal. It would be nice to see Synology integrate this into DSM so there isn't a secondary screen needed. It would also be nice to have some choice as to where your data is being sent and to be charged a proper amount. I'm afraid my bank might also charge me a fee for the Pounds to USD conversion. I'll update the post when I find out.
Here are the web portal screens below.
That's it. It works!