Jump to content
RESET Forums (homeservershow.com)

2011 Failure to Install on Mirror


customator
 Share

Recommended Posts

All

 

I am having a very bizarre problem. I have a system with the following config:

Gigabyte H55M-USB3, Core i3 550, 4 Gig of RAM, two new Western Digital 500 Gig drives connected to the JMicon ports.

 

I had 2011 RC installed successfully on the box on a mirror of these two drives. And when I try to install the RTM I am failing. It comes up with a screen that says: “There was a problem during the installation.” It gives a link to a log file that I have copied in at the end of this message. Can anyone give me a pointer on where to go with this one?

FYI, if I disable the mirror I can install using the same ports to a standalone drive no problem. Also, I have a second box (same board, CPU, & memory) that I can install on the mirror with no problem.

 

Any help would be appreciated.

 

Log File:

[4/10/2011 8:51:43 AM 2e8] INFO: Beginning execution from folder: X:\sources

[4/10/2011 8:51:43 AM 2e8] Failed to wait for PnP devices some drives and devices may not be visibile

[4/10/2011 8:51:43 AM 2e8] WARNING: No Configuration file found

[4/10/2011 8:51:43 AM 2e8] INFO: Setup Running in UI mode

[4/10/2011 8:51:43 AM 2e8] starting the ui mode

[4/10/2011 8:51:43 AM 2e8] Initializing common controls

[4/10/2011 8:51:43 AM 2e8] Done initializing common controls

[4/10/2011 8:51:43 AM 2e8] Displaying the wizard

[4/10/2011 8:51:43 AM 2e8] Loading the logo for home server

[4/10/2011 8:51:43 AM 2e8] Setting the logo for home server

[4/10/2011 8:51:48 AM 2e8] Populating the disk listview

[4/10/2011 8:51:48 AM 2f4] INFO: Ennumerating valid values for configuration setting InstallDisk for UI

[4/10/2011 8:51:52 AM 2f4] Disk db2599bd-b173-490d-9ff0-460cc772d347

[4/10/2011 8:51:52 AM 2f4] Name: \\?\CdRom0

[4/10/2011 8:51:52 AM 2f4] Friendly Name:

[4/10/2011 8:51:52 AM 2f4] Device path: \\?\usbstor#cdrom&ven_asus&prod_br-04b2t&rev_1.01#a3d0bf099810&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}

[4/10/2011 8:51:52 AM 2f4] Adaptor: USB to ATA/ATAPI Bridge

[4/10/2011 8:51:52 AM 2f4] Status: ONLINE

[4/10/2011 8:51:52 AM 2f4] Health: HEALTHY

[4/10/2011 8:51:52 AM 2f4] Device type: DVDROM

[4/10/2011 8:51:52 AM 2f4] Media type: 0x00000033

[4/10/2011 8:51:52 AM 2f4] Size: 4305752064

[4/10/2011 8:51:52 AM 2f4] Bytes per sector: 2048

[4/10/2011 8:51:52 AM 2f4] Sectors per track: 32

[4/10/2011 8:51:52 AM 2f4] Tracks per cylinder: 64

[4/10/2011 8:51:52 AM 2f4] Flags: 0x00000000

[4/10/2011 8:51:52 AM 2f4] Bus type: VDSBusTypeUsb

[4/10/2011 8:51:52 AM 2f4] Partition style: MBR

[4/10/2011 8:51:52 AM 2f4] Signature: 0x00000001

[4/10/2011 8:51:52 AM 2f4] Extent 0 type 0x00000002 size 4305752064 offset 0

[4/10/2011 8:51:52 AM 2f4] Pack (null) status 0x00000001 flags 0x00000000

[4/10/2011 8:51:52 AM 2f4] [Online]

[4/10/2011 8:51:52 AM 2f4] WARNING: No disks found

[TRACE] UpdateSystemDriveIdx : Exited (0x80004005)

[4/10/2011 8:51:52 AM 2f4] WARNING: Unable to find a boot disk might require additional drivers

[4/10/2011 8:51:52 AM 2e8] No boot disk found. Loading error string

[4/10/2011 8:51:52 AM 2e8] Getting static control to display the string.

[4/10/2011 8:51:52 AM 2e8] Displaying the boot disk status message

[4/10/2011 8:52:51 AM 2e8] INFO: Found applicable driver D:\BootDrv\GSATA\32Bit\xraid_f.inf (Class=SCSIAdapter)

[4/10/2011 8:52:51 AM 2e8] INFO: Found applicable driver D:\BootDrv\GSATA\64Bit\xraid_f.inf (Class=SCSIAdapter)

[4/10/2011 8:52:51 AM 2e8] INFO: Atempting to load driver X:\windows\INF\oem0.inf

[4/10/2011 8:52:51 AM 2e8] WARNING: Failed to load driver X:\windows\INF\oem0.inf with error 259

[4/10/2011 8:52:51 AM 2e8] INFO: Atempting to load driver X:\windows\INF\oem1.inf

[4/10/2011 8:53:02 AM 2e8] INFO: Devices loaded in 0 ms

[4/10/2011 8:53:02 AM 2e8] INFO: Setting chosen value for configuration setting Drivers from UI

[4/10/2011 8:53:02 AM 2e8] Deleting items from the list view

[4/10/2011 8:53:02 AM 2e8] Attempting to populate the list view with disks after user clicked the Load drivers button

[4/10/2011 8:53:02 AM 2e8] Populating the disk listview

[4/10/2011 8:53:02 AM f4] INFO: Ennumerating valid values for configuration setting InstallDisk for UI

[4/10/2011 8:53:03 AM f4] Disk 52d7ec7f-abd9-494a-a055-a253f62364ba

[4/10/2011 8:53:03 AM f4] Name: \\?\CdRom0

[4/10/2011 8:53:03 AM f4] Friendly Name:

[4/10/2011 8:53:03 AM f4] Device path: \\?\usbstor#cdrom&ven_asus&prod_br-04b2t&rev_1.01#a3d0bf099810&0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}

[4/10/2011 8:53:03 AM f4] Adaptor: USB to ATA/ATAPI Bridge

[4/10/2011 8:53:03 AM f4] Status: ONLINE

[4/10/2011 8:53:03 AM f4] Health: HEALTHY

[4/10/2011 8:53:03 AM f4] Device type: DVDROM

[4/10/2011 8:53:03 AM f4] Media type: 0x00000033

[4/10/2011 8:53:03 AM f4] Size: 2894954496

[4/10/2011 8:53:03 AM f4] Bytes per sector: 2048

[4/10/2011 8:53:03 AM f4] Sectors per track: 32

[4/10/2011 8:53:03 AM f4] Tracks per cylinder: 64

[4/10/2011 8:53:03 AM f4] Flags: 0x00000000

[4/10/2011 8:53:03 AM f4] Bus type: VDSBusTypeUsb

[4/10/2011 8:53:03 AM f4] Partition style: MBR

[4/10/2011 8:53:03 AM f4] Signature: 0x00000001

[4/10/2011 8:53:03 AM f4] Extent 0 type 0x00000002 size 2894954496 offset 0

[4/10/2011 8:53:03 AM f4] Pack (null) status 0x00000001 flags 0x00000000

[4/10/2011 8:53:03 AM f4] [Online]

[4/10/2011 8:53:03 AM f4] Disk a063909d-c2f2-4f31-b202-2ca02d5e2850

[4/10/2011 8:53:03 AM f4] Name: \\?\PhysicalDrive0

[4/10/2011 8:53:03 AM f4] Friendly Name: MainOS SCSI Disk Device

[4/10/2011 8:53:03 AM f4] Address: Port8Path0Target0Lun0

[4/10/2011 8:53:03 AM f4] Device path: \\?\scsi#disk&ven_mainos&prod_&rev_0000#5&1c00e421&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}

[4/10/2011 8:53:03 AM f4] Adaptor: GIGABYTE GBB36X Controller

[4/10/2011 8:53:03 AM f4] Status: ONLINE

[4/10/2011 8:53:03 AM f4] Health: HEALTHY

[4/10/2011 8:53:03 AM f4] Device type: DISK

[4/10/2011 8:53:03 AM f4] Media type: 0x0000000c

[4/10/2011 8:53:03 AM f4] Size: 500095254528

[4/10/2011 8:53:03 AM f4] Bytes per sector: 512

[4/10/2011 8:53:03 AM f4] Sectors per track: 63

[4/10/2011 8:53:03 AM f4] Tracks per cylinder: 255

[4/10/2011 8:53:03 AM f4] Flags: 0x00001000

[4/10/2011 8:53:03 AM f4] Bus type: VDSBusTypeRAID

[4/10/2011 8:53:03 AM f4] Partition style: UNKNOWN

[4/10/2011 8:53:03 AM f4] Extent 0 type 0x00007fff size 500095254528 offset 0

[4/10/2011 8:53:03 AM f4] [unallocated]

[4/10/2011 8:53:03 AM f4] WARNING: BIOS Recommended boot disk not found defaulting system disk to the first usable disk

[4/10/2011 8:53:03 AM f4] INFO: Adding the specified system disk \\?\PhysicalDrive0 to the top of the drive list

[4/10/2011 8:53:03 AM 2e8] Boot disk found. Loading default string

[4/10/2011 8:53:03 AM 2e8] Getting static control to display the string.

[4/10/2011 8:53:03 AM 2e8] Displaying the boot disk status message

[4/10/2011 8:53:03 AM 2e8] User can't continue, leaving install button disabled

[4/10/2011 8:53:32 AM 2e8] INFO: Setting chosen value for configuration setting InstallDisk from UI

[4/10/2011 8:53:32 AM 2e8] Launching Windows Setup

[4/10/2011 8:53:32 AM 2e8] INFO: Setup Collecting User Data -------------------------------------------

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for DefaultLanguage

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value AUTO

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for DefaultKeyboard

[4/10/2011 8:53:32 AM 2e8] INFO: Skipping optional configuration, no value specified

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for DefaultLocale

[4/10/2011 8:53:32 AM 2e8] INFO: Skipping optional configuration, no value specified

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for DefaultTimeZone

[4/10/2011 8:53:32 AM 2e8] INFO: Skipping optional configuration, no value specified

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for DefaultServerName

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value Server

[4/10/2011 8:53:32 AM 2e8] WARNING: Unable to verify computer name availability due to network error 2136

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for Drivers

[4/10/2011 8:53:32 AM 2e8] INFO: Using UI specified value

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for InstallDisk

[4/10/2011 8:53:32 AM 2e8] INFO: Using UI specified value

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for SystemPartitionType

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: MBR firmware detected

[4/10/2011 8:53:32 AM 2e8] INFO: GetFirmwareEnvironmentVariableW indicated required partition type 1 (Status: 1)

[4/10/2011 8:53:32 AM 2e8] WARNING: Changing partition type of system drive to 1 due to firmware requirements

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for SystemPartitionActive

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for SystemPartitionFormat

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for MSRPartitionType

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for WindowsPartitionID

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value AUTO

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for WindowsPartitionSize

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value 61440

[4/10/2011 8:53:32 AM 2e8] INFO: Calculated pre system partition remaining space as: 499989348352

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for WindowsPartitionExtend

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for FinalPartitionID

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Calculated post system partition remaining space as: 435564838912

[4/10/2011 8:53:32 AM 2e8] INFO: Calculated number of requred filler partitons as: 0

[4/10/2011 8:53:32 AM 2e8] INFO: 0 fillers were created (MBR) adjusting final partition ID accordingly

[4/10/2011 8:53:32 AM 2e8] INFO: Setting final partition ID: 3

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for FillerCreationInfo

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: No filler partitions requested skipping assembly

[4/10/2011 8:53:32 AM 2e8] INFO: Creating filler partitions using XML: (null)

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for FillerModificationInfo

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: No filler partitions requested skipping assembly

[4/10/2011 8:53:32 AM 2e8] INFO: Modifying filler partitions using XML: (null)

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for InstallLanguage

[4/10/2011 8:53:32 AM 2e8] INFO: Populating internal setting from existing data

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for PID

[4/10/2011 8:53:32 AM 2e8] INFO: Skipping optional configuration, no value specified

[4/10/2011 8:53:32 AM 2e8] INFO: Getting configuration for PostInstallScript

[4/10/2011 8:53:32 AM 2e8] INFO: Skipping optional configuration, no value specified

[4/10/2011 8:53:32 AM 2e8] INFO: Setup Checking System Requirements ---------------------------------

[4/10/2011 8:53:32 AM 2e8] INFO: Checking CheckReqs key in the ini file

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value 1

[4/10/2011 8:53:32 AM 2e8] INFO: System meets minimum HDD requirements

[4/10/2011 8:53:32 AM 2e8] INFO: System meets minimum RAM requirements

[4/10/2011 8:53:32 AM 2e8] INFO: System meets minimum processor speed requirements

[4/10/2011 8:53:32 AM 2e8] INFO: System meets minimum processor core requirements

[4/10/2011 8:53:32 AM 2e8] INFO: System meets architecture requirements

[4/10/2011 8:53:32 AM 2e8] INFO: Setup Configuring System Drive ---------------------------------------

[4/10/2011 8:53:32 AM 2e8] INFO: Checking ConfigDisk key in the ini file

[4/10/2011 8:53:32 AM 2e8] INFO: No value supplied, using default value 1

[4/10/2011 8:53:33 AM 2e8] Successfully cleaned disk \\?\PhysicalDrive0

[4/10/2011 8:53:33 AM 2e8] INFO: Setup Launching Windows Installation ---------------------------------

[4/10/2011 8:53:33 AM 2e8] INFO: Creating the unattend file from the template

[4/10/2011 8:53:33 AM 2e8] INFO: Checking RunSetup key in the ini file

[4/10/2011 8:53:33 AM 2e8] INFO: No value supplied, using default value 1

[4/10/2011 8:53:33 AM 2e8] INFO: Checking SetupCmdLn key in the ini file

[4/10/2011 8:53:33 AM 2e8] INFO: No value supplied, using default value

[4/10/2011 8:53:33 AM 2e8] INFO: Launching Win7 Setup from: X:\sources\setup.exe with cmd line: setup.exe /uilanguage:en-us /unattend:X:\unattend.xml)

[4/10/2011 8:53:57 AM 2e8] ERROR: Win7 Setup Exited with 31

[TRACE] UIBackend::RunWindowsSetup : Exited (0x80004005)

[TRACE] UIBackend::Launch : Exited (0x80004005)

[4/10/2011 8:53:57 AM 2e8] Failed to launch Windows Setup

Link to comment
Share on other sites

Nothing I like better than answering my own question!

 

I also had a Highpoint 2680 RAID card in the box. I was not installing to those drives (yet) and they were not showing up the install config (that is why I did not mention it). However, when I removed card and tried the install again it worked (at least it is installing right now).

 

Funny, the other box has the same card and did not have this issue. I will look into it more.

 

One question or the group; has anyone noticed that you can no longer choose what drive to install the OS on with this version? I must say that I did not notice this with the RC but it is certainly a problem with the RTM.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...