Jump to content
RESET Forums (homeservershow.com)

HP N54L does not start after RAM upgrade


FF272
 Share

Recommended Posts

Hi guys, I wanted to upgrade the RAM of my HP N54L. When I use the new RAM, the server does not boot (2x8GB ECC RAM KVR16LE11L/8 compatibility). If I use an old (4GB ECC) and one new RAM-Stick, everything boots normally.

The HP startup screen shows only 4GB of RAM, but the BIOS recognizes the second new RAM-Stick correctly. Also the RAM is recognized in XPEnology. What else can I do, so that I can use 16GB ECC RAM?

Link to comment
Share on other sites

I found a „solution“. I put the new RAM-sticks in and tried to boot/install Freenas instead of XPEnology. The Freenas installer booted immediately. After that I put my XPEnology boot stick back in and everything worked. Don‘t know why. 
I bought KVR16LE11L/8 RAM. 

Edited by FF272
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...