Jump to content
RESET Forums (homeservershow.com)
Hevisko

"soft" reboot hanging with POST 418C

Recommended Posts

Hevisko

Good day,

 

 Recently my N36L started to hang at POST after a soft reboot, ie. Alt-Control-Del, linux reboot, etc. but it boots fine when power off-power on.

Always with code 418C at the bottom corner.

 

Google, etc. have given me nothing. Anybody with some information what this 418C means?
(It *might* be related to me adding a firewire adapter to the machine, but I'm not sure yet and a bit of a challenge to remove that to proof the hypothesis)

 

 

Share this post


Link to post
Share on other sites
JaimieV

Hi - Belated but maybe slightly useful to someone else, as the Internet is very short of mentioins of 418C on a Microserver. The manual is particularly annoying, referring you to a "POST codes and beeps" section that doesn't exist. Thanks, HP.

 

My N36L sticks on 418C when I've got an LSI 9207-4i4e SAS card in it that has been disabled in firmware by a prior owner. Which is very annoying as I don't have another PC-shaped-object around to try and fix it. So it seems to be at the "checking PCIe objects" part of POST. Perhaps you have a card that isn't getting reset properly at soft reboot?

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Moreplavec
      By Moreplavec
      I have new Gen8 and installed SSD do 5th bay, trying to boot via USB Grub. But i can't get it to work. I switched in BIOS to USB boot and tried to install Ubuntu server 16 + /boot set to USB drive, partition created on USB (ext3). Not working.
       
      So i deleted all and tried to install Proxmox to SSD, without problem. Then i used tutorial to create USB bootable https://jarrodla.blogspot.cz/2014/04/hp-microserver-gen8-boot-from-5th-sata.html but again, no luck. I tried to create another three USB flash drives, still not booting, USB is skipped to next medium.
       
      Please, can you help me what's crucial to USB to be working as GRUB loader to boot from SSD? Thanks!

    • bennybennybenny
      By bennybennybenny
      Hey guys,
      Not sure if this is the correct section to post this, but in a bit of a pickle after attempting to flash my HP Microserver N40L to the modified bios last night.
       
      The story goes - I've had myN40L microserver for the past few years running Windows 8.1 and acting as a media server for the house. I recently upgraded a laptop I have so had a spare Samsung 840 EVO 120gb SSD that I thought I'd throw in the microserver as the boot drive. 
       
      I ghosted the existing windows install (which was on a 250gb mechanical hard drive) over to the SSD, rebooted the computer and everything was working file. When I checked the performance of the SSD using the Samsung Magician software it indicated thatt the SSD wasn't running at full speed due to AHCI being disabled. I then did a bit of research and found that SATA port 5 (normally meant for an optical drive) that the SSD was connected to doesn't run at full speed and in IDE mode. I read that the modified bios that's floating around for Microserver's can fix this.
       
      So I flashed the bios to my machine however now when I boot up it gets to the loading screen for windows and then errors and reboots. This boot loop just continues constantly with no way to get into windows.
       
      I've tried setting the hard drive mode to both IDE and AHCI in BIOS with no success, I've reverted the BIOS back to default settings, took out the CMOS battery overnight, tried to re-flash back to default HP firmware, re-flashed the modded BIOS with no drives in the server and even run the windows 8 startup repair with no success whatsoever, it just continues to error and boot loop.
       
      I did leave all 4 of my other SATA hard drives in the machine when flashing the modded bios originally so don't know if this affected it. I wish I'd just left the original BIOS on there now.
       
      Is there anything I can try to fix this? I'd really prefer not to have to reinstall windows 8 as it took me awhile to set everything up for media (Sonarr, CouchPotato, iTunes, Serviio etc).
       
      Any help is greatly appreciated.
       
      Cheers Benny


×
×
  • Create New...