Jump to content
RESET Forums (homeservershow.com)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • xelent
      By xelent
      Hi there,
       
      I've just gotten my old Proliant server out from mothballs recently to use as a Backup controller for my photographic archive. It's specs are a standard G840 2.8GHz Dual core with 16 GB of ram installed with a standard 350 watt PSU. I'm running WSE 2019 with 4x1TB HDD's installed in the 4 bay drive cage. 3 drives are formatted to RAID 0 in WSE (not embedded HP RAID) and one drive acts as the system/boot drive.

      The server is surprisingly responsive given its age, with LAN transfer speeds between 84-94MBs. So has pretty much taken center stage in my backup control between my  external drives and 4x1TB RAID 0 NAS.
       
      However, I have been wanting to attach a 256GB SSD boot drive for my OS, so that I can utilize the full capacity of my 4 bay drive. It seems that the BIOS will not let you boot any HDD/SSD off the spare SATA connection on my MB. Anyway I am hoping to eventually attach a PCIe USB 3 card to that. But in the meantime I would like to boot a separate drive other than the 4 bay one already installed.

      I gather that you can install a PCIe SSD card on this machine. But it's not clear to me as to what kind of card and drive would be suitable for this server. I realize that my MB is PCIe gen 2, which will incur diminished speed compared to the latest gen 3 MBs. But should I be using NVMe or SATA m.2 drives? Or does it even matter? Also will the BIOS allow me to boot from this drive?
       
      Thanks for taking the time.
    • Moreplavec
      By Moreplavec
      I have new Gen8 and installed SSD do 5th bay, trying to boot via USB Grub. But i can't get it to work. I switched in BIOS to USB boot and tried to install Ubuntu server 16 + /boot set to USB drive, partition created on USB (ext3). Not working.
       
      So i deleted all and tried to install Proxmox to SSD, without problem. Then i used tutorial to create USB bootable https://jarrodla.blogspot.cz/2014/04/hp-microserver-gen8-boot-from-5th-sata.html but again, no luck. I tried to create another three USB flash drives, still not booting, USB is skipped to next medium.
       
      Please, can you help me what's crucial to USB to be working as GRUB loader to boot from SSD? Thanks!

    • bennybennybenny
      By bennybennybenny
      Hey guys,
      Not sure if this is the correct section to post this, but in a bit of a pickle after attempting to flash my HP Microserver N40L to the modified bios last night.
       
      The story goes - I've had myN40L microserver for the past few years running Windows 8.1 and acting as a media server for the house. I recently upgraded a laptop I have so had a spare Samsung 840 EVO 120gb SSD that I thought I'd throw in the microserver as the boot drive. 
       
      I ghosted the existing windows install (which was on a 250gb mechanical hard drive) over to the SSD, rebooted the computer and everything was working file. When I checked the performance of the SSD using the Samsung Magician software it indicated thatt the SSD wasn't running at full speed due to AHCI being disabled. I then did a bit of research and found that SATA port 5 (normally meant for an optical drive) that the SSD was connected to doesn't run at full speed and in IDE mode. I read that the modified bios that's floating around for Microserver's can fix this.
       
      So I flashed the bios to my machine however now when I boot up it gets to the loading screen for windows and then errors and reboots. This boot loop just continues constantly with no way to get into windows.
       
      I've tried setting the hard drive mode to both IDE and AHCI in BIOS with no success, I've reverted the BIOS back to default settings, took out the CMOS battery overnight, tried to re-flash back to default HP firmware, re-flashed the modded BIOS with no drives in the server and even run the windows 8 startup repair with no success whatsoever, it just continues to error and boot loop.
       
      I did leave all 4 of my other SATA hard drives in the machine when flashing the modded bios originally so don't know if this affected it. I wish I'd just left the original BIOS on there now.
       
      Is there anything I can try to fix this? I'd really prefer not to have to reinstall windows 8 as it took me awhile to set everything up for media (Sonarr, CouchPotato, iTunes, Serviio etc).
       
      Any help is greatly appreciated.
       
      Cheers Benny


×
×
  • Create New...