I have built a WHS 2011 server. All was well except my Win 10 PC would not back up to it. Installing the KB281721 hotfix was done on the server and part of the process was to reinstall the connector on the PC. I uninstalled from control panel. I then had a ton of problems connecting to WHS 2011 connect webpage. This turned out to be being blocked by the server windows firewall, which started working ok when I disabled the private firewall.
Now the connector web page comes up and initiates the install. Connect a computer wizard starts up and asks me for the server name or IP.
Neither work. Whether I enter the server name or the IP it says the server could not be located.
If I open the remote access web page from any device inside or outside LAN, I can connect to the server and carry out all you would expect. I can connect via RDP, I can ping the LAN IP, I can ping the FQDN and WAN IP.
The server is showing in Network and all shares are browse-able.
I installed the find my server wizard and that failed to find it even using the command line switch with the <servername>
So how do I get the server connector up and running.
I have added theses ports to the router
3389 disabled at the moment until I can secure it better
I found 3 copies of windows home server in the listed devices and have removed all of them.
I am at a loss as to what to do next. Hoping some experienced WHS 2011 server people know what to do next.......
I have had my install of WHS2011 for some time and with a static IP have been able to use remote access by switching on that service albeit not using microsoft's domain name registration.
The system has worked for about 5 years but is now grumbling about certificates when I login either remote or using one of my PCs on the local home network using mstsc. The error message is attached. Clearly if I click yes and ignore the error I can continue as I can when accessing the server using the static IP.
I have looked at various posts about certificates and buying certificates for domain names etc. most of which the responses go over my head.
Any assistance that could help me address this would be gratefully received.
I have my WHS 2011 client PC database on its own dedicated drive. This drive is now showing errors, and the client pc backups are now not completing. I have a replacement drive and a backup of the client PC database made before the failure. How can I replace the client PC backup drive, restore the client PC database, AND have WHS 2011 continue to use the restored client PC database?
I have a WHS 2011 box with no special networking-related settings going on. Accessing shares on all the PCs in my house get around 100MB/s read and write. All macs are getting around 25MB/s. Tried mounting shared volumes as cifs and smb. I've found a few forums of people reporting the same with various forms of windows servers and though there are 100 hack-y suggestions, nothing has ever worked for me.
Anyone have any ideas on what I could do to improve performance? If i can't get this working well, it'll mean a lot of buying decisions, completely reworking my network storage.
I am setting up a MicroServer with Windows Home Server 2011 running as a file server at my home (local area network).
On my old file server, I was able to scan documents at my Brother MFC and send them directly to a the user's folder on the file-server via FTP.
WHS 2011 is proving a little more challenging to setup. Could someone please help with how to configure WHS2011?
I've seen the youtube video by Mike on setting up WHS 2011 and FTP, but it only enables one central storage folder, rather than sending scanned documents to a user's individual folder.
any help much appreciated.