Jump to content
RESET Forums (homeservershow.com)
Phil Croxford

HP Gen 10 Micro Server Bios Update???

Recommended Posts

Phil Croxford

Hi,

 

Not sure if this is a taboo subject?? but delete if needed.

I have bought a Gen 10 Micro Server for my home so i can run a Plex Server in house. i have all the drivers and updates that i need from the HP website

but gone and noticed that the Bios update i need from what i can gather i need a contract? I'm not sure what to do?

how do i get the bios update for this server?

 

when i bought this server its running on 5.12 version with a build date of 05/25/2017 so my bios is well out of date.

 

can any one guide me in the right direction to get the update?

 

thanks

Share this post


Link to post
Share on other sites
Scepticalist
Just noted that there's a new BIOS out for Gen10.
 
I haven't flashed it yet, but this addition in the release notes might make some people happy:
 
- Integrate Marvell RAID utility into BIOS shell.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Angelus
      By Angelus
      Good day all
       
      i bought a gen 10 x3216 MicroServer and I have been trying to install windows server 2016 on it with a usb and I get it to boot into the usb with the iso on it but I can not get past the one install step where u supposed to select the drive.
       
      instead it says to download storage drivers and browse to select driver. I have downloaded every single storage driver from the hpe site or is sure does feel like it.
       
      if I try to select the driver I have to do so manually by unticking show only compatible drivers because if I leave it ticked there is nothing compatible. Iam stumped on what the correct driver is.
       
      ok so what Iam trying to do isssssss I want to install the os onto the usb that I have attached inside the box the one that is directly coming off the board. Is that a different driver ? 
       
      In bios/boot up options I can see all usb connected.
       
      can anyone please help me with this 
    • Mark Belanger
      By Mark Belanger
      Greetings,
       
      I'm new to the HPMSG8 world and so far I'm loving it. I have a stock Xeon with 16G of aftermarket memory with iLO patched to 2.70. Next up is adding a RAID card, so I can put my boot SSD on the onboard RAID. I picked up a LSI SAS9211-8i on Amazon, but am struggling to flash it to IT mode on the MicroServer. Is this even possible? Unfortunately, the only other system I have with PCI slots is 32-bit.
       
      Any pointers would be greatly appreciated.
       
       
      -MB
    • npapanik
      By npapanik
      FYI, I have just installed Windows Server 2019 Standard (Desktop Experience) using the latest (WS2016) HP AMD chipset & VGA driver. Everything is recognised in Device Manager and stable.
    • TonyTheTechie
      By TonyTheTechie
      I need to update the firmware on a HP Proliant Microserver Remote Access Card installed in my N40L.
       
      Can someone please explain what I need to do to create a boot device that will update the firmware on the Remote Access Card?
       
      Thanks
       
      Tony Self


×
×
  • Create New...