Jump to content
RESET Forums (homeservershow.com)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • AllanHP
      By AllanHP
      Hello guys, i have a HP ProLiant ml350p g8 I had installed one gpu card rx580 strix and I had used one gpu frequency  management call asus gpu tweakll, when I change gaming mode to silence mode my computer restart and I saw one red light on the motherboard, I fix the problem I had installed one old version of the asus tweakll, now the computer works well, but the red light still on, I used the software OCCT I checked psu memory gpu voltages run many testes and pass in all tests, I try to find in the manual what this red light is but I can't find, thanks for the help.

    • Himaro
      By Himaro
      So I'm trying to replace my ageing HP Proliant Microserver N54L. It's used as a general dogs body server, running Blue Iris, Plex and as my NAS server.
      I'm on a pretty tight budget but the poor server is always at 90% + CPU because of the CCTV and I'm looking at adding a second camera soon.
      Is there such a thing as a reasonably priced ECC home server build?
      My MVP is 8GB ECC memory, with 4 threads on the CPU. 
      I'd prefer a small form factor but that's like gold dust unless you throw a lot of $$££€€ at it. I've got to get this past my partner you see 😅
      Any ideas? I'm not loyal to any particular brand, so long as it works.
    • Dave
      By Dave
      Synology C2 Backup Now Available to US Customers
       
      This is a data backup service that Synology released to EU customers last year.  I remember trying to get it to install and it wouldn't take my CC# because of location.  Fair enough, will it now and how much will it cost?
       
       

       
      Seriously, how much is it?  Ask Google and on March 25th, 2018 it's $14.12.  That's still not a bad price for 100Gb of backup with versioning. Also not bad to consider this as a secondary cloud backup.  (See below for pricing)
       
      One thing to keep in mine this is a service that falls under Hyper Backup and not Cloud Sync.  The two are very different.  This will be a true back with versioning and not a simple synchronization of a folder in a cloud service like dropbox.  Many a mistake have been made with sync pairs and cloud services!  That won't happen with backup and versions.
       
      Enable it and Back Up
       
      In your Synology DSM go to Hyper Backup. Install if you are not using it.  You would also use this app to backup to USB, Amazon S3, Microsoft Azure, etc.
      Select Synology C2 Cloud Backup.

       
      That should launch a login portal.  If you have used Synology services before and have a login you can use those credentials or create credentials right here.
       
      Start your free trial for 30 days but prices are still in POUNDS!  That's a pound symbol right?  If it was released to Europe why isn't it in Euros? I'm so confused.    (it is Euro Dave!  I had a brain fart on the Euro symbol.  See response post below.  Embarrassingly laughing at myself on this!)
       
      It's here where it wouldn't let me proceed last time I tried due to it being a limited trial to EU customers only.  You have to put your CC# in to get the 30 day free trial.  It says i'm in the Europe Frankfort market but the purchase went through.  So, does this mean if the US sinks into the Ocean and all my data goes with it, my photos will be in Frankfort safe and sound?  Sweet!
       

       
      This is the last web screen I see as it has now taken me back to Hyper Backup.

       
      I'm going to choose a small amount to get started with.
       

       
       

       
      I'm also going to limit the bandwidth of the backup and set Client Side encryption.  The encryption password box will allow you to use the Admin account password so you don't forget what you put here unless your Admin password is less than 8 characters.
       
      Once you are finished it will ask you if you want to backup now. I said now just to keep the network clean while I'm working but it will backup tonight.  Look at the screen shot below.  See the little arrow by Synology C2?  That is the link to the web portal.  It would be nice to see Synology integrate this into DSM so there isn't a secondary screen needed.  It would also be nice to have some choice as to where your data is being sent and to be charged a proper amount.  I'm afraid my bank might also charge me a fee for the Pounds to USD conversion.  I'll update the post when I find out.
       

       
      Here are the web portal screens below.

       

       
      That's it.  It works!
       
       



    • lordcroci
      By lordcroci
      Hi there!
      I'm new around here, looked for the presentation thread but haven't found any! 
      Anyway I hope to be able to contribute (as far as my newbie's knowledge will be useful )....

      Speaking about what I'm trying to do, I have this amazing microserver gen8, on which I have 2 3tb wd red as storage and an ocz 125gb ssd on 5° port.. Installed a couple of days ago mr. PROXMOX (I'm a complete newbie to it too ) and configured the xpenology 6.0 that runs amazingly!
      Now.. I'm just wondering which is the best option to configure a vpn (possibily openvpn) and from my inexperience I found a couple of options:
      - try a container with turnkey debian 8 OpenVPN
      - install ubuntu on a VM and setup openvpn
      - try the vpn server on xpenology
       
      or the least pleasurable
      - install openvpn on my windows 10 pc and leave it turned on in way to access the microserver through vpn.. 
      What do you think is better to do? Considering that I am a real noob and will need some guide or some tutorial (already googled something and Have found a lot of material on the openvpn site.. but honestly can't find so much about proxmox and vpn)

      PS: sorry for my english, but I'm italian and I'm still learning!
       
      thanks a lot!
      Lordcroci
    • npapanik
      By npapanik
      I was wondering whether the dual core X3216 in the Gen10 Microserver would be adequate for Plex server transcoding 1080p movies. I currently have a N40L which obviously struggles at this...
       
      TIA 


×
×
  • Create New...