By Mark Belanger
I'm new to the HPMSG8 world and so far I'm loving it. I have a stock Xeon with 16G of aftermarket memory with iLO patched to 2.70. Next up is adding a RAID card, so I can put my boot SSD on the onboard RAID. I picked up a LSI SAS9211-8i on Amazon, but am struggling to flash it to IT mode on the MicroServer. Is this even possible? Unfortunately, the only other system I have with PCI slots is 32-bit.
Any pointers would be greatly appreciated.
I need to update the firmware on a HP Proliant Microserver Remote Access Card installed in my N40L.
Can someone please explain what I need to do to create a boot device that will update the firmware on the Remote Access Card?
I hope this topic fits here just right.
So a few days ago, I moved my Microserver Gen8 to a friend's place and resetted it.
When we set it up with new disks, the raid-creation in OpenMediaVault (Debian 9.6) failed.
`smartctl` tests passed just fine though and vendor-tools also didn't report any drive errors.
- I start the Raid creation via `mdadm` and after a while (random blocks and times), it fails and the second disk seems to fail (e.g. sda and sdb are creating a raid, then sdb gets "kicked out" and reread as e.g. sdd, sometimes even with only a few GB of space instead of 3TB).
I tried attaching the second disk on ata2 and ata3, but it keeps failing. The one on ata1 works just fine though.
I tried different disks and vendors, but get the same results.
There are some errors in `dmesg`, but I don't know what they mean. I pasted them here: https://pastebin.com/raw/XASQJ6cy
What I did here: I stopped the raid to re-create it, but then didn't do anything for a while and the error still came up.
Can someone help me with this? (As a wild guess, I'd say that somethings wrong with the SATA connections at least on ata2 and ata3).
Thanks in advance
Wonder if anyone can point me in the right direction here. Have just replaced the CPU on my gen 8 microserver. Went according to the video above. Upon booting the server up, there is a clicking sound coming from the main board. Regular as clockwork, and the server isn't posting. Any ideas? I've swapped back to the G1610T CPU, but still the same issue. And just make it interesting, I don't have access to a monitor or keyboard.
Hello! Recently I've been thinking to upgrade the CPU in my HP ProLiant ML10 v2. It currently has a Intel® Pentium® G3240 (I got the model of this server that comes with the Intel® Pentium® G3240) and according to the manual I should be able to upgrade the CPU to a Intel® Xeon® E3-1220v3. Is this true? Do I need to change / get anything else? Thanks.