Passthrough SSD plugged into motherboard to Raid Controller in PCI?

[jjbrunton]

I've purchased a P410 that I've installed into the PCI slot but I'm having issues trying to get my SSD to be recognized by it, I've tried all sorts of combinations:

Disable b120i - Nope

Change to SATA legacy mode - nope

Change to AHCI mode - nope

 

In all of these configurations, the card is unable to see the SSD. I'm assuming it is because I need some way to plug the SSD into one of the SAS ports?

[schoondoggy]

What type of cable are you using to connect the SSD to the P410?

[schoondoggy]

I re-read your post. Yes you need a SFF-8087 to SATA cable to connect the SSD to the P410. Also be sure to up date the firmware on the P410. 

https://www.newegg.com/Product/Product.aspx?Item=9SIAERN68H8118&cm_re=SFF-8087_to_SATA-_-9SIAERN68H8118-_-Product

 

[jjbrunton]

39 minutes ago, schoondoggy said:

I re-read your post. Yes you need a SFF-8087 to SATA cable to connect the SSD to the P410. Also be sure to up date the firmware on the P410. 

https://www.newegg.com/Product/Product.aspx?Item=9SIAERN68H8118&cm_re=SFF-8087_to_SATA-_-9SIAERN68H8118-_-Product

 

 

Perfect, that cable looks like what I need. Thanks