By Mark Belanger
I'm new to the HPMSG8 world and so far I'm loving it. I have a stock Xeon with 16G of aftermarket memory with iLO patched to 2.70. Next up is adding a RAID card, so I can put my boot SSD on the onboard RAID. I picked up a LSI SAS9211-8i on Amazon, but am struggling to flash it to IT mode on the MicroServer. Is this even possible? Unfortunately, the only other system I have with PCI slots is 32-bit.
Any pointers would be greatly appreciated.
It's that time of year again (plus or minus a few months) for Windows owners to pour out a suitable beverage, switch on the TV (say to a cricket match in Summer) and multiplex those activities with updating Windows on one's devices.
This time round I reverted to an 'in place' upgrade using the Upgrade now button at https://www.microsoft.com/en-gb/software-download/windows10, wondering whether my shared folder setup would be destroyed as it had been in previous upgrades … but no, in general all went smoothly for:
HP Microserver N36L
HP Microserver N54L
HP Microserver Gen8 x 2
These are pure file servers running W10 Professional.
The only point to note is the continued absence of the CPU usage trace on the Gen8 Task Manager graph.
FYI, I have just installed Windows Server 2019 Standard (Desktop Experience) using the latest (WS2016) HP AMD chipset & VGA driver. Everything is recognised in Device Manager and stable.
Microsoft is changing the update policy for windows 10 per this article on thurrotts website
a couple of years ago, I stopped using a windows 10 homeserver because the update cycles kept breaking things
this new announcement could cause some reconsideration of this.
Don't think I am going to replace my Qnap nas anytime soon -its been rock solid
but if I where building a new server, would consider it.
wouldn't be hard to set up machine with a lot more capability than most NAS's without laying out 400 bucks for a windows server license
and you can use Drivepool, which I miss from my W10 server
I need to update the firmware on a HP Proliant Microserver Remote Access Card installed in my N40L.
Can someone please explain what I need to do to create a boot device that will update the firmware on the Remote Access Card?