Jump to content
RESET Forums (homeservershow.com)

Configuring graphics on Linux


jbssm
 Share

Recommended Posts

Hi all,

I've just got the Microserver Gen10 and after some fiddling I managed to install Arch Linux.

 

In order to do that I had to turn of IOMMU in BIOS since that's the only way for it to recognize the drives in order to boot.

 

This shows another bug where AMD kfd device can't start due to IOMMU being disabled and I end up without any video besides VESA (so, not using the GPU).

 

What drivers/workaround do you sugest to use in order to get the GPU to work on linux?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • Lundgrens
      By Lundgrens
      Hey!
       
      What is the state of PCI passthrough on the Gen8? Hardware wise it supports IOMMU/VT-d, but I've heard people have had problems with PCI passthrough still.
       
      Is it possible to passthrough the RAID controller to a virtual machine in ESXi or KVM?
       
      Is it possible to passthrough a GPU to a virtual machine in ESXi or KVM?
    • Joe_Miner
      By Joe_Miner
      HPE ProLiant Gen10 MicroServer with streaming movie playing (Batman vs Superman – Monitor 1), six VMs loaded and powered up (Hyper-V Manager window open – Monitor 2), and Excel spreadsheet opened crunching 19 years of daily data for multiple graphs (Monitor 3) all using about 49% of installed 32GB RAM.  The disk activity that can be made out on the Task Manager is from the VMs – the Excel spreadsheet is on my home server.
      For the above I had the following connections left to Right:
      1st Monitor attached with HDMI cable via: “Active DisplayPort to HDMI 4K Adapter, Benfei DP to HDMI Ultra HD Converter”   https://www.amazon.com/gp/product/B01M5DX296/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
      2nd Monitor attached to VGA Port
      3rd Monitor attached with HDMI cable via : Passive “4K DisplayPort 1.2 to HDMI Adapter by Benfei DP Display Port to HDMI UHD 2K 3D Audio and Video Converter Male to Female Gold-Plated Cord” https://www.amazon.com/gp/product/B06VV26BLB/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1
       
      Check out the Thread on PassMark performance: 
      The 2D Graphics Mark was 424.7
      The 3D Graphics Mark was 1211
      The PassMark Analysis has the resolution of all three of my monitors as well as other information it detected about the AMD Radeon R7 Graphics.  I do not have a 4K monitor so I was not able to test that capability.
       
      THIS WAS ALL AFTER I CORRECTED A ERROR I FOUND VERY EARLY ON IN SYSTEMS INFORMATION AND PROBLEM DEVICES
      Systems Information showed a Problem device: ACPI\AMD0020\20 -- to fix that I went to http://support.amd.com/en-us/download

       
      The file will look like:

       
      it will take awhile to execute!
       
      Afterwards the Device Manager looked like:

       
      And in System Information the Problem devices will be cleared out:

       
      My setup at the time was:

       
      Running at ~55W with 32GB RAM and two VMs active when I did this.
       
       
×
×
  • Create New...