Good day all
i bought a gen 10 x3216 MicroServer and I have been trying to install windows server 2016 on it with a usb and I get it to boot into the usb with the iso on it but I can not get past the one install step where u supposed to select the drive.
instead it says to download storage drivers and browse to select driver. I have downloaded every single storage driver from the hpe site or is sure does feel like it.
if I try to select the driver I have to do so manually by unticking show only compatible drivers because if I leave it ticked there is nothing compatible. Iam stumped on what the correct driver is.
ok so what Iam trying to do isssssss I want to install the os onto the usb that I have attached inside the box the one that is directly coming off the board. Is that a different driver ?
In bios/boot up options I can see all usb connected.
can anyone please help me with this
FYI, I have just installed Windows Server 2019 Standard (Desktop Experience) using the latest (WS2016) HP AMD chipset & VGA driver. Everything is recognised in Device Manager and stable.
Well, I finally did it and got a 4K monitor and have attached it to my MicroServer.
Here is my list of devices that I worked with:
4K LG Monitor
· LG32UD59-B 32” 4K UHD LED Monitor, 3840x2160, HDCP 2.2, HDMI, DisplayPort, AMD FreeSync, On-Screen Control
HPE ProLiant MicroServer Gen10 X3421
· 8GB RAM - Stock
· Windows 10 Pro x64
· OS Drive: SATA Port 1 – Samsung 840 Pro 256GB loaded in Icy Dock’s EZConvert in Drive Bay 1
· 4K LG Monitor attached with DP cable – NOTE: 4K LG Monitor was also attached with HDMI cable via: “Active DisplayPort to HDMI 4K Adapter, Benfei DP to HDMI Ultra HD Converter” -- both attachments seemed to work well.
· SYBA SD-CM-UAUD USB 2.0 External Stereo Audio Adapter
· External speakers with subwoofer
· Logitech K120 Keyboard with mouse
· Pioneer slim external USB 3.0 Blu-Ray BDR-XD05S
· CyberLink PowerDVD 18 Ultra
The monitor seems to work well in 4K mode with both the DP cable connected directly to the MS as well as the HDMI cable using a DP to HDMI converter that I used last year when working on the Beta unit. So far so good.
Here's a video of my experience
New member here, some great info on this forum so hopefully a few of you have experience with the Intel E3-1260L CPU running in a HP Microserver Gen8?
I know for sure it will work as I’ve seen some good threads on here but can anyone tell me if the upgrade made a noticeable difference in the fan speeds and noise?
Im looking at putting two Gen8’s in a living room in place of an old N54L so cautious of too much noise..
I also posted this on the HPE forums.
Just bought my first HP Microserver and got a decent deal on a Gen10 x3421. I am using a USB key to try and install either CentOS or RHEL 7 on it and neither install sees any of the disks in the front slots. I am using 1TB WD Caviar Green drives. I have also tried a Seagate drive but nothing seems to work.
I have gone back and forth between EUFI and Legacy hoping that would help. Nothing.
I am currently installing on a 500B USB drive and hope to see if the drives are visible when I fully boot.
I also looked through the drivers and firmware and did not see anything directly related to my problem. I was going to download the SPP but couldn't igure out how to register my system manually to allow me to download the SPP.
Am I missing anything obvious or does the system not yet support RHEL 7 or CentOS 7?
Thanks for any information.