Jump to content
RESET Forums (homeservershow.com)
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • cakthy
      By cakthy
      I have a Raidmax case that I suspect is messing with my motherboard, and I generally don't care for the large size of it. So I will be selling the case if I can find a new one.
      What I need:
      Something $70 or less (I could go more if needed)
      Black color
      Side window
      Micro ATX size
      Handle/possible to mod for a handle
      I was looking at this one: E-2007 to buy. So what do you think? Any cases that you know of that I could buy?
    • ckqualls
      By ckqualls
      I'm in a choir which is stuck on paper, and we have to use 3 ring binders for uniformity.  I was hoping to find an insert that fits into a standard 3 ring binder that holds a Surface Pro 3. I've scanned the music into OneNote.
       
      Thanks,
       
      Kelly
    • kristikay
      By kristikay
      I do a lot of off table work on my Surface Pro 2, and I miss the 'fixed' hinge on a laptop that keeps the keyboard and surface at a consistent angle.  Has anyone seen a hardshell case or other type of solution for this?
    • gadgetek
      By gadgetek
      Hello!  I have created a tablet case for the Surface Pro 3 which is designed with artists in mind.  I launched a campaign on Kickstarter to raise funds to produce it.  It is not just a protective case, but a protective case that brings functionality for those time when you don't want the keyboard, but want easy access to keyboard shortcut.  I've integrated buttons into the case that can be customized to your favorite shortcuts in any program.  Please take a look!  
       
      https://www.kickstarter.com/projects/gadgetek/meta-the-microcontroller-enhanced-tablet-accessory
       
       
    • hermanpeckel
      By hermanpeckel
      I recently came home to my beloved N54L as dead as a door nail. It turned out a power surge zapped the PSU. A quick disassemble and fit of a standard ATX power supply confirmed it was just the PSU that had died.
       
      I jumped on eBay and found a suitable replacement (or so I thought). The main power connector was 4 pins short of the original one. I plugged it all in and to my surprise it booted and works fine. One thing though - the fan is constantly on full. I assume it's the CPU fan. When I plug the normal ATX PSU back in, the fan operates as it should.
       
      Anyhow, my questions. Is there any way I can mod my PSU to suit? It has a 4 pin connector on it that is currently unused. Or, rather than hunt around and hope for another suitably sized PSU, maybe I could just transfer the N54L parts into a standard computer case and PSU. There are some cheap ones about for $50 that look like they could do the trick.
       
      Does anyone know of any caveats I should be aware of? 
       
      Thanks in advance.


×
×
  • Create New...