hey forum member, need some help
this evening , there has been continual attempts to remotely log onto my QNAP Nas
about every 15 seconds
see the attached notification screen shot
I have disabled the default admin account and the real obscure administrator account has a very secure password
what should I do next? should I be worried?
I've been banging my head for a few days now trying to figure this out and I've run out of ideas. Hoping the very intelligent crew here can help me out.
I have a Drobo 5N and a Synology RS816 on my network, both of which have been working without issue for quite some time now. I've always connected to both via Windows Explorer by simply going to the network address i.e., \\N5 and \\SYN (sample names).
I recently got a new desktop which is where the issues are coming up. When I try to go to \\N5, it results in a message saying it cannot find that location. However, \\SYN works just fine. What's strange is that I can see and manage the Drobo through the Drobo Dashboard software. What could be preventing Windows from seeing the Drobo on the network?
I've already enabled the SMB 1.x protocol, ensured the workgroup names are the same, rebooted both the machine and the Drobo, made sure network sharing is enabled, and even did a fresh install to ensure that some program I installed didn't cause the issue. Every other machine I have can access the Drobo without issue. It's just this new desktop, and everything is running Windows 10.
Another strange phenomenon that I discovered is that if I go to "\\DROBO" (verbatim, not a sample name) it leads me to the Synology. Where is Windows getting the mapping from that it is directing that address to the Synology?
This is driving me nuts so any advice would be greatly appreciated.
So I'm trying to replace my ageing HP Proliant Microserver N54L. It's used as a general dogs body server, running Blue Iris, Plex and as my NAS server.
I'm on a pretty tight budget but the poor server is always at 90% + CPU because of the CCTV and I'm looking at adding a second camera soon.
Is there such a thing as a reasonably priced ECC home server build?
My MVP is 8GB ECC memory, with 4 threads on the CPU.
I'd prefer a small form factor but that's like gold dust unless you throw a lot of $$££€€ at it. I've got to get this past my partner you see 😅
Any ideas? I'm not loyal to any particular brand, so long as it works.
Synology C2 Backup Now Available to US Customers
This is a data backup service that Synology released to EU customers last year. I remember trying to get it to install and it wouldn't take my CC# because of location. Fair enough, will it now and how much will it cost?
Seriously, how much is it? Ask Google and on March 25th, 2018 it's $14.12. That's still not a bad price for 100Gb of backup with versioning. Also not bad to consider this as a secondary cloud backup. (See below for pricing)
One thing to keep in mine this is a service that falls under Hyper Backup and not Cloud Sync. The two are very different. This will be a true back with versioning and not a simple synchronization of a folder in a cloud service like dropbox. Many a mistake have been made with sync pairs and cloud services! That won't happen with backup and versions.
Enable it and Back Up
In your Synology DSM go to Hyper Backup. Install if you are not using it. You would also use this app to backup to USB, Amazon S3, Microsoft Azure, etc.
Select Synology C2 Cloud Backup.
That should launch a login portal. If you have used Synology services before and have a login you can use those credentials or create credentials right here.
Start your free trial for 30 days but prices are still in POUNDS! That's a pound symbol right? If it was released to Europe why isn't it in Euros? I'm so confused. (it is Euro Dave! I had a brain fart on the Euro symbol. See response post below. Embarrassingly laughing at myself on this!)
It's here where it wouldn't let me proceed last time I tried due to it being a limited trial to EU customers only. You have to put your CC# in to get the 30 day free trial. It says i'm in the Europe Frankfort market but the purchase went through. So, does this mean if the US sinks into the Ocean and all my data goes with it, my photos will be in Frankfort safe and sound? Sweet!
This is the last web screen I see as it has now taken me back to Hyper Backup.
I'm going to choose a small amount to get started with.
I'm also going to limit the bandwidth of the backup and set Client Side encryption. The encryption password box will allow you to use the Admin account password so you don't forget what you put here unless your Admin password is less than 8 characters.
Once you are finished it will ask you if you want to backup now. I said now just to keep the network clean while I'm working but it will backup tonight. Look at the screen shot below. See the little arrow by Synology C2? That is the link to the web portal. It would be nice to see Synology integrate this into DSM so there isn't a secondary screen needed. It would also be nice to have some choice as to where your data is being sent and to be charged a proper amount. I'm afraid my bank might also charge me a fee for the Pounds to USD conversion. I'll update the post when I find out.
Here are the web portal screens below.
That's it. It works!
I'm new around here, looked for the presentation thread but haven't found any!
Anyway I hope to be able to contribute (as far as my newbie's knowledge will be useful )....
Speaking about what I'm trying to do, I have this amazing microserver gen8, on which I have 2 3tb wd red as storage and an ocz 125gb ssd on 5° port.. Installed a couple of days ago mr. PROXMOX (I'm a complete newbie to it too ) and configured the xpenology 6.0 that runs amazingly!
Now.. I'm just wondering which is the best option to configure a vpn (possibily openvpn) and from my inexperience I found a couple of options:
- try a container with turnkey debian 8 OpenVPN
- install ubuntu on a VM and setup openvpn
- try the vpn server on xpenology
or the least pleasurable
- install openvpn on my windows 10 pc and leave it turned on in way to access the microserver through vpn..
What do you think is better to do? Considering that I am a real noob and will need some guide or some tutorial (already googled something and Have found a lot of material on the openvpn site.. but honestly can't find so much about proxmox and vpn)
PS: sorry for my english, but I'm italian and I'm still learning!
thanks a lot!