Jump to content
RESET Forums (homeservershow.com)

Replace failing drive containing client backup database


Teetime
 Share

Recommended Posts

I'm still unable to move the Client PC database folder to my new drive. I'm not able to find much of anything on the 0x8004007E error itself, but I did find these suggestions for resolving the WHS move folder error, but they did not resolve my issue:

1. Ran the Client PC database Cleanup task.

2. Uninstalled WHS addins.

3. Temporarily disabled these services:

- Windows Server Health Service

- Windows Server Client Computer Backup Service

 

I've found this post which deals with a WHS Move Folder error when trying to move a folder to a Drive Bender mount point. Do you think this technique would work in my case?

 

It would be helpful if I knew exactly what the 0x8004007E error signifies.

 

 

Edited by Teetime
Link to comment
Share on other sites

  • 2 weeks later...

Rename the existing folder, set up the new destination, stop the services (above), move the old content into the new folder, overwriting the existing (new) content, and then start the services.

 

This should get everything working. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • MoonGlum
      By MoonGlum
      Hi All,
      I have built a WHS 2011 server.  All was well except my Win 10 PC would not back up to it.  Installing the KB281721 hotfix was done on the server and part of the process was to reinstall the connector on the PC.  I uninstalled from control panel.  I then had a ton of problems connecting to WHS 2011 connect webpage.  This turned out to be being blocked by the server windows firewall, which started working ok when I disabled the private firewall.
      Now the connector web page comes up and initiates the install.  Connect a computer wizard starts up and asks me for the server name or IP.
      Neither work.  Whether I enter the server name or the IP it says the server could not be located.
      If I open the remote access web page from any device inside or outside LAN, I can connect to the server and carry out all you would expect.  I can connect via RDP, I can ping the LAN IP, I can ping the FQDN and WAN IP.
      The server is showing in Network and all shares are browse-able.
      I installed the find my server wizard and that failed to find it even using the command line switch with the <servername>
      So how do I get the server connector up and running.
      I have added theses ports to the router
      65510 
      3389  disabled at the moment until I can secure it better
      4125
      443
      80
      I found 3 copies of windows home server in the listed devices and have removed all of them.
       
      I am at a loss as to what to do next.  Hoping some experienced WHS 2011 server people know what to do next.......
       
      KR
       
    • fakiee
      By fakiee
      Hi, hoping for a bit of guidance on what todo with my N40L box.  I have it sat in the living room connected to the TV.  Its running Windows 10 with Kodi, sabnzb, torrents, and a bunch of discs with all my files and media.  I would like to have a solid setup that can be used to access my data,, share game ISOs, download NZBs, do backups, etc.
       
      I'm going with WHS 2011, is this the best option considering the other HS OS's available such XPEnology, FreeNas, etc? 
       
      Specs:
       
      N40L:
      8GB ATI GPU BIOS Hack 128GB SSD (OS sitting in DVD Bay) 1.5TB HD 200gb HD 200 gb HD2 I have a 750GB SSD - not sure what to use this for?  
      Thanks for your help!
       
       
    • Boogieshoes
      By Boogieshoes
      Hi folks,
       
      I have had my install of WHS2011 for some time and with a static IP have been able to use remote access by switching on that service albeit not using microsoft's domain name registration.
       
      The system has worked for about 5 years but is now grumbling about certificates when I login either remote or using one of my PCs on the local home network using mstsc.   The error message is attached.    Clearly if I click yes and ignore the error I can continue as I can when accessing the server using the static IP.  
       
      I have looked at various posts about certificates and buying certificates for domain names etc. most of which the responses go over my head.
       
      Any assistance that could help me address this would be gratefully received.
       
      Boogie.
       
       

    • santacruzskim
      By santacruzskim
      I have a WHS 2011 box with no special networking-related settings going on. Accessing shares on all the PCs in my house get around 100MB/s read and write. All macs are getting around 25MB/s.  Tried mounting shared volumes as cifs and smb.  I've found a few forums of people reporting the same with various forms of windows servers and though there are 100 hack-y suggestions, nothing has ever worked for me.
       
      Anyone have any ideas on what I could do to improve performance? If i can't get this working well, it'll mean a lot of buying decisions, completely reworking my network storage.
    • Nelg
      By Nelg
      Hi All,
       
      I am setting up a MicroServer with Windows Home Server 2011 running as a file server at my home (local area network).
       
      On my old file server, I was able to scan documents at my Brother MFC and send them directly to a the user's folder on the file-server via FTP.
       
      WHS 2011 is proving a little more challenging to setup.  Could someone please help with how to configure WHS2011?
       
      I've seen the youtube video by Mike on setting up WHS 2011 and FTP, but it only enables one central storage folder, rather than sending scanned documents to a user's individual folder.
       
      any help much appreciated.
       
      Thanks
       
×
×
  • Create New...