Jump to content
RESET Forums (homeservershow.com)

Recommended Posts

  • 1 month later...
  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

  • Joe_Miner

    5

  • schoondoggy

    5

  • Lord Raven

    5

  • Trig0r

    4

Top Posters In This Topic

Popular Posts

No it is not. That is registered memory. This server does not support registered memory.

I do love the way its a new unit and you guys already have drives hanging out of it on the other headers and the case off

This is what HPE shipped with the Gen10 BETA:   After loading Windows 10 Pro onto a SSD attached to SATA Port5 I changed out the Stock HPE RAM for: 2 x Kingston ValueRAM 16G

Posted Images

tinybilbo
10 hours ago, schoondoggy said:

No it is not. That is registered memory. This server does not support registered memory.

Thanks schoondoggy...

I always get confused when looking for memory on eBay!

Link to post
Share on other sites
  • 3 months later...
DieterKoblenz

I've looked through the forums, and it seems no-one tried to install 64 gb of RAM in this machine. 

 

Could it be possible, that this kit works: 

https://www.crucial.com/memory/ddr4/ct2k32g4dfd8266

 

it's a 32gb DDR4-2666 UDIMM, however it's non ECC. On my old N54L I could also use non-ECC memory. 

 

Haven't found a 32gb UDIMM ECC slip yet. 

 

Ah well, perhaps 32gb of RAM is sufficient. 

Link to post
Share on other sites
Trig0r

64Gb is possible, they did it at STH..

"32GB DDR4 PC4-21300 / DDR4-2666, CL19, Dual Ranked, x8, Unbuffered ECC and non-ECC DIMMs from Crucial"

 

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • oldwhs12
      By oldwhs12
      I have been running the WHS1 pack 3 for many years.  Unfortunately it is no longer working.  I got a Proliant microserver Gen10 hoping it will run it but was unable to install the software.  The software should run on most older PCs?

      Does anyone have the WHS1 running on the Gen10?  Also my WHS1 iso is Pack 1.  If I manage to install the Pack 1 can I find on the web the upgrade to pack 3?  Would I be forever stuck at Pack 1?  Any advice would be appreciated.

    • AVsonyfan
      By AVsonyfan
      All credit to schoondoggy for his original idea. A shame I am on the wrong side of the Atlantic to order an SDM kit as the import duties make it an expensive option, or would have if they were still available. I had to look around to see what alternatives I could find... and managed to find the bits needed on Amazon!
       
      I must admit I am rather pleased with the end result of this project and may repeat it on the other Gen8 MicroServer. The outcome is a server with a mirrored system drive on the internal B120i, and the main drive bays connected to an HP P222 card providing a RAID-10 data volume. This is pretty much my ideal setup for a stable resilient but small server.
       
      Sabrent 3.5" to x2 SSD Internal Mounting Kit (BK-HDCC)
      Amazon UK - https://amzn.to/32qEVou
      Amazon US - https://amzn.to/3h8Blom
      The kit comes with all the cabling you need and all the required screws to mount the drives and bracket.
      Two types of power splitter cables are included along with two SATA cables. The bracket holds two SSDs and provides a small gap between them.
       
      I mounted the bracket next to the PSU but leaving a 2-3mm gap to allow for some airflow past the SSDs in case they get warmed by the P222.
       
      Tips:
      Put some insulating tape along the underneath of the upper chassis rail next to the PSU and drilled three small holes.
      I used two strips on to stop the drill bit from walking across the metal. Drill with a 2mm first then a 2.5mm bit. This leaves enough metal for screws to thread in.
      Check and measure each hole against the bracket as you go so that they line up. Bracket is then fixed in place using the provided screws (see photo).
       
       
      The final part of the puzzle is another Mini-SAS to SATA cable the same as the one connected to the internal drive bays.
      This is an SFF-8087 Mini-SAS [male] connector to 4 SATA [female] header cables. The 50cm cable from Jyopto works great and not too much spare to lose within the system.
      Amazon UK - https://amzn.to/2CXAzgb
      I could not find it on Amazon US site but there was one from CableCreations that same length.
       
      Just need to add your choice of SSDs and cable up to B120i port.  I went with Samsung 860 Pro SSDs for the longer rated lifespan of write cycles.
       
       
      I decided to forget about an internal DVD/RW drive and opted for an external HP F2B56AA slimline drive that can be plugged into the USB of either system.
      Amazon UK - https://amzn.to/2EgSSxD
      Amazon US - https://amzn.to/326uFmL
       
       
      Sabrent also make a really good quality 2.5" to 3.5" bay converter adapter (BK-PCBS) that I have used in the EX490/X510 to convert from HDD to SSD system drives.
      Amazon UK - https://amzn.to/3jbYBmT
      Amazon US - https://amzn.to/335kXQz
       
      Hopefully this information will prove useful to some looking to update their MicroServer.
       
       
       
       

    • E3000
      By E3000
      Does anyone know if it is possible to get Agentless Management Service (AMS) running on Debian/Ubuntu Linux? It is always showing as Not Available in the iLO page and I have only ever seen this active in Windows.
    • E3000
      By E3000
      Hey guys,
       
      Has anyone around here been successful in setting up Proxmox on a Gen8 using a HBA for storage?
    • hfournier
      By hfournier
      I'm putting together a build for a non-profit client and I want to make sure they're getting the best bang for their bucks.
       
      Current server:
      HP MicroServer N40L 8 GB WS2012E Plextor PX-256M5Pro SSD - OS drive SAMSUNG HD103SI 1TB (x2) - Data drives (Storage Spaces) WDC WD20EZRX 2TB (x2) - Data drives (Storage Spaces)  
      On the new server, I'd like to setup the OS on SSDs (RAID 1) for speed and redundancy. Trying to squeeze extra SSDs on the Gen 10 Plus lead me to using the PCIe card. I guess on the Gen 10 there's enough room and SATA connections to put a couple of SSDs in the Optical bay instead. And, I'm leaving 1 drive bay empty to add another 2 TB should they need it, which is not likely.
       
      New Server Option 1 ($2084 CDN):
      HP MicroServer Gen 10 X3418 (P07203-001) 8 GB 8 GB Module - DDR4 2400MHz (Kingston KTH-PL424E/8G) WS2016E StarTech.com Dual M.2 PCIe SSD Adapter Card - x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 3.0 - RAID & JBOD (PEX8M2E2) Samsung 970 EVO 500GB NVMe M.2 Internal SSD (MZ-V7E500BW) (x2) - OS Drives (RAID 1) WD Gold 2TB (x3) - Data drives (Storage Spaces, or can I RAID 5 them?)  
      New Server Option 2 ($2362):
      HP MicroServer Gen 10 Plus (P16006-001) 16 GB WS2016E StarTech.com Dual M.2 PCIe SSD Adapter Card - x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 3.0 - RAID & JBOD (PEX8M2E2) Samsung 970 EVO 500GB NVMe M.2 Internal SSD (MZ-V7E500BW) (x2) - OS Drives (RAID 1) WD Gold 2TB (x3) - Data drives (Storage Spaces, or can I RAID 5 them?)  
      So two questions for all of you:
      If anything, what would you change and why? For the extra $278 (13% more), is the Gen 10 Plus worth it?  
      Thanks.
       



×
×
  • Create New...