3 or 4 buttons switch to control Z-Wave plugs through Wink Hub 2

[Mirson 0]

What do we have:

1. Plugs - Zooz Z-Wave Plus Mini Plug On / Off Module ZEN07, Cert. #ZC10-16085170 - 3 items;

2. Wink Hub 2 - 1 item;

3. Plugs are connected to Wink Hub 2. 

 

What do we need:

1. To have a wired (or battery powered) ON/OFF switch with 3 or 4 buttons, which will control these plugs through the Wink Hub 2;

2. This switch should fit the rocker size plate and be in light almond color.

 

I would be grateful for advice from experienced specialists.

[JROrtiz 34]

 

What do we have:

1. Plugs - Zooz Z-Wave Plus Mini Plug On / Off Module ZEN07, Cert. #ZC10-16085170 - 3 items;

2. Wink Hub 2 - 1 item;

3. Plugs are connected to Wink Hub 2.

 

What do we need:

1. To have a wired (or battery powered) ON/OFF switch with 3 or 4 buttons, which will control these plugs through the Wink Hub 2;

2. This switch should fit the rocker size plate and be in light almond color.

 

I would be grateful for advice from experienced specialists.

I know this post is quite old but in case you're still looking, the Lutron Connected Bulb Remote is a great accessory to the Wink Hub. It will fit in a standard wall plate (requires Lutron adapter) and the four buttons can be programmed to trigger shortcuts on the Wink Hub. Pricey at $30, but extremely flexible and good looking.

[Mirson 0]

I know this post is quite old but in case you're still looking, the Lutron Connected Bulb Remote is a great accessory to the Wink Hub. It will fit in a standard wall plate (requires Lutron adapter) and the four buttons can be programmed to trigger shortcuts on the Wink Hub. Pricey at $30, but extremely flexible and good looking.

Thank you for your answer, but we've already tried this remote and it can't communicate with these Z-wave plugs through Wink hub.

Edited March 14, 2017 by Mirson