Hello! Recently I've been thinking to upgrade the CPU in my HP ProLiant ML10 v2. It currently has a Intel® Pentium® G3240 (I got the model of this server that comes with the Intel® Pentium® G3240) and according to the manual I should be able to upgrade the CPU to a Intel® Xeon® E3-1220v3. Is this true? Do I need to change / get anything else? Thanks.
I just upgraded my CPU from a 1610T to a 1220L. All is going well, but I noticed fan speed has increase from like 10-14% to 14%-18%. I am wondering if someone else who upgraded is seeing the same just to rule out that I applied thermal paste wrong, screwed up heatsink install or something like that. I was expecting more or less (or even lower) fan speed as this CPU has a TDP of 20W, and the 1610T had 35W.
Thanks a lot!
I bought a HP microserver Gen8 to learn ESX and to host some VM.
This is my initial configuration :
CPU G1610T Celeron 12Go RAM 1 microSD (ESX) 4 HDD (data) 1 SSD (vm)
Really great hardware but I wanted to upgrade it to have more core/thread (and more VM).
After read many and many post like this :
(and many many other )
I bought a E3-1265L (v1 > the strange and cheaper version ^^) with a TDP at 45W and frequency lower than the v2 (processor base frequency = 2,40GHz instead of 2,50GHz) and my understanding was the difference between the original CPU (TDP = 35W) and the E3-1265L is enough small to avoid thermal problems.
BUT... (do you expect that ? )
After many test, I know I have a new heating system in my house...
Let me explain.
I made some test with mprime and I found these (relevant) results :
ORIGINAL CPU : CELERON G1610T
power consumption : arround 52 W
cooler : CPU fanless and optimal thermal setting in bios
Zone | T0 | T+30' | T+1H | T+2H | T+4H | =================================================================== CPU | 40°C | 40°C | 40°C | 40°C | 40°C | RAM | 35°C | 44°C | 44°C | 43°C | 42°C | VR P1 Zone | 46°C | 52°C | 52°C | 52°C | 52°C | ===================================================================
NEW CPU : E3-1265L (v1)
power consumption : arround 93 W
cooler : CPU fan (2 NF-4x10 Noctua added on the cpu heatsink) and maximum thermal setting in bios
Zone | T0 | T+30' | T+1H | T+2H | T+4H | =================================================================== CPU | 40°C | 53°C | 54°C | 55°C | 54°C | RAM | 35°C | 47°C | 49°C | 55°C | 52°C | VR P1 Zone | 46°C | 58°C | 62°C | 62°C | 61°C | =================================================================== note 1 : with the E3-1265L, all test without cpu fan are aborded after some minute because the cpu was overheated (manually stop over 65°c)
note 2 : with the E3-1265L and "cpu cooled by Noctua", the microserver is less reactive (ie : iLo need more time to give web gui)
I have some questions :
1) Do you think my results are good ?
I received the CPU in a very bad package and without anti-static bag. Maybe it doesn't work fine ?
2) Do you know a test to confirm the good preformance of my CPU ?
I don't know how to benchmark my CPU with similar other configuration
3) Only 10W TDP between Celeron and E3-1265L and too large increase of temperature ? Have-you the same result ?
4) Have you some warning point to share with me ?
5) Today, should we continue to use the B120I instead of AHCI for SATA performance ?
Thank's by advance,
Hi, I'm thinking of getting a surface 2 for a familiy of 6. Two parents and 4 young children.
The children will need to access school websites that undoubtebly use flash and require a complex username, teacher's email, passcode / pin.
What should I expect performance wise of a surface 2 with 6 people signed into it?
Should I get the larger disk version of the surface because the whole family plans to use it?
Is there an RT version of Last pass or a RT last pass like solution to remember all the passwords for the school sites?
I've been trying to upgrade my Surface Pro 3 to Windows 10. I cannot get the Windows icon on my taskbar, which is the usual way to begin the process. All updates have been installed. The "Get Windows 10 App" says KB3035583 is not installed, but when I try to install it, I'm told it is already installed. Any suggestions would be appreciated.