Jump to content
RESET Forums (homeservershow.com)

HP GEN8 problem with 1TB Hard disk


mammifero
 Share

Recommended Posts

Good Morning

a little help

 

i have HP Microserver GEN8

 

i have bought 2 Western Digital HD

WD10EFRX Hard Disk Desktop for NAS, Intellipower, SATA 6 GB/s, 64 MB Cache, 3.5 ", 1 TB, Red

 

on the pdf file of the quick spec of the microserver is written that is possible to use hard drive of 1 tb

 

but my system didn't recognize the hard drive when i run the raid utility during the boot

 

i'm stupid :)  or there's something that i don't know ?

 

best regards

 

Matteo

Link to comment
Share on other sites

Currently, when you go into the B120i setup, you do not see any drives?

I would check to be sure the drives are slid all the way into the bays. I would also check the cable from the back-plane to be sure it is plugged into the motherboard firmly.

You may want to check the drives in another computer to be sure they power up properly.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...