Jump to content
RESET Forums (homeservershow.com)

Gen8 wd red nasware3


Rfinch@royfnet.com
 Share

Recommended Posts

Hi

 

I have a gen8 server, I was replacing my 2 wd red 2tb drives with 2 new wd red 3tb drives the gen8 server cannot see the new drives. Looking at the drives the original drives have nasware 2 and the new drives have nasware 3. Any info on if these drives should work or what configure I need to get them to work would be great. At the moment I am thinking of sending the drives back.

 

Thanks in advance

Link to comment
Share on other sites

Tried both with no success, both disk come up with hard disk 0:SMART is not supported by hard disk, cant believe both are u/s as both are new out of the bag.

Link to comment
Share on other sites

If you switch to B120i RAID mode, you may have to power off the server completely afterwards, and power back on. Mine will not detect my 8TB Reds after changing mode as something with the controller hangs, and even then they only work in IDE or RAID, not AHCI.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...