I am using https://www.digi.com/products/networking/infrastructure-management/console-servers/digi-connect-it-16-48 (Digi Connect IT 16), and connecting by LAN to a Windows PC.
I need to add 2 connectors. Can I connect a serial device to a serial port in PC and see it as a COM port in the local PC?
Can Serial to Ethernet (https://www.serial-server.net/serial-device-server/serial-to-ethernet/) do this? How to configure it?
As of June 2020, what are the latest versions of firmware for HP Microserver Gen8 to be installed on the system itself? Also do any other components have updatable firmware/os-independent software?
So far my list is as follows:
BIOS - J06 (04/04/2019) iLO 4 - v2.73 (11/02/2020) Intelligent Provisioning - v1.71 (20/02/2019)
and I guess the following could also be added (although both out of date):
Smart Update Manager (HP SUM) - v8.1.0 (21/12/2017) Service Pack for ProLiant (06/11/2017)
Date formated as DD/MM/YYYY.
I believe all the B120i Smart Storage stuff is part of Intelligent Provisioning.
Hello guys, i have a HP ProLiant ml350p g8 I had installed one gpu card rx580 strix and I had used one gpu frequency management call asus gpu tweakll, when I change gaming mode to silence mode my computer restart and I saw one red light on the motherboard, I fix the problem I had installed one old version of the asus tweakll, now the computer works well, but the red light still on, I used the software OCCT I checked psu memory gpu voltages run many testes and pass in all tests, I try to find in the manual what this red light is but I can't find, thanks for the help.
I have a Gen8 G1610T since 2 years and I am very happy with it. I use it to only host my Plex Server with 3*2Tb drives.
I bought for a cheap price (40€) a Xeon E3-1220v2 and I have question about it. I have read Elvisdk's topic about temperature with G1610T default heatsink on 1220v2 and I wonder if play (and transcode) 1080p movies with 4 cores enable will be ok or too hot ? Did I must enable only 2 cores to be safe ?
I cannot compare Elvisdk's temperature with wPrime burnt with the temperatures generated by Plex because I don't know them with a E3-1220v2...
Thanks for your feedback.
I have upgraded from G1610T to E3-1265Lv2 with success but the memory speed which is still stuck at 1333MHz instead of 1600Mhz.
I have 2 x 4GB DIMMs with one be the original HPE DIMM and the other a Crucial 4GB 240 Pin DDR3 1600 MTps PC3-12800 CL11 Unbuffered ECC UDIMM Memory Module )(https://www.amazon.co.uk/dp/B00IW4M9PK/ref=pe_385721_37986871_TE_item)
The iLO memory summary is always showing:
and while I am on the latest firmware ....
The BIOS options available are : 1066, 1333, Auto
I have also tried the power setting to "max performance" but still the memory speed remains to 1333Mhz
Any ideas on how to set the memory operating frequency to 1600Mhz ?