Jump to content
RESET Forums (homeservershow.com)
Sign in to follow this  
epicwanlink

B120i Linux drivers?

Recommended Posts

epicwanlink

Hi guys, I have Debian 8.5 installed on my server currently, I have the following drives.

1x 120Gb Samsung SSD plugged into SATA port on mobo.

2x 2tb SATA drives and 1x 4tb drive and a 3tb drive all in the four default drive cage slots.

The 2x2tb drives are in an array together, and the other three drives are all in 1 drive each arrays separated. It would seem when running command blkid i only see my three drives the ones that are in arrays by them selves the 2xtb drives do not show up in blkid at all as you can see below only the two arrays with one drive each they show up

 

if I do Fdisk -l i see all the physical drives including the  2x2tb drives

 

so what i am asking is does the b120i support Linux or is something wrong ? why do the 2 drive array not show up in blkid so i can mount it.

the other 2 drivers i have mounted with no issues

 

im currently loading up the offline hp smart storage administrator to see if i can see any issues inside it                                                                                                                                   

 

linuxserv:~# blkid                                                                                                                                                       
/dev/sda: PTTYPE="PMBR"                                                                                                                                                  
/dev/sde1: UUID="0c1b3332-4174-4460-9b03-d34c18a9ff1f" TYPE="ext4" PARTUUID="11b5e4fb-01"                                                                                
/dev/sde5: UUID="943b3636-2c6b-4d36-89c5-32ff308144a5" TYPE="swap" PARTUUID="11b5e4fb-05"                                                                                
/dev/sdc1: PARTLABEL="Microsoft reserved partition" PARTUUID="bd64ad3c-9b2f-47f5-b625-3039c2b4e08a"                                                                      
/dev/sdc2: LABEL="Dump" UUID="E08C370E8C36DEAA" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="3651363a-7ec5-4c52-8ac5-a065e31768a8"                             
/dev/sdd1: PARTLABEL="Microsoft reserved partition" PARTUUID="02603ddf-d8e7-47c8-bf88-705203f4b43d"                                                                      
/dev/sdd2: LABEL="TV shows" UUID="72EA361BEA35DC53" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e872d29c-69bd-4771-a5a0-21727a183552"
 
 
linuxserv:~# fdisk -l
 
Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x00000000
 
Device Boot Start End Sectors Size Id Type
/dev/sda1 1 4294967295 4294967295 2T ee GPT
 
Partition 2 does not start on physical sector boundary.
 
Disk /dev/sdc: 2.7 TiB, 3000592982016 bytes, 5860533168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 12B84374-1D2B-4101-869F-16487DA79DD3
 
Device Start End Sectors Size Type
/dev/sdc1 34 262177 262144 128M Microsoft reserved
/dev/sdc2 264192 5860466687 5860202496 2.7T Microsoft basic data
 
Partition 2 does not start on physical sector boundary.
 
Disk /dev/sdd: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 8FB6CCB2-63A9-47CF-9F18-EF6585D3D3F6
 
Device Start End Sectors Size Type
/dev/sdd1 34 262177 262144 128M Microsoft reserved
/dev/sdd2 264192 7813969919 7813705728 3.7T Microsoft basic data
 
Partition 2 does not start on physical sector boundary.
 
Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sde: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x11b5e4fb
 
Device Boot Start End Sectors Size Id Type
/dev/sde1 * 2048 224860159 224858112 107.2G 83 Linux
/dev/sde2 224862206 234440703 9578498 4.6G 5 Extended
/dev/sde5 224862208 234440703 9578496 4.6G 82 Linux swap / Solaris 
Edited by epicwanlink

Share this post


Link to post
Share on other sites
epicwanlink

Edit: I went into CBF mode at about 2 am and ended up just installing Ubuntu on the os drive and using Linux software raid on the two drives I went to the extremes of trying hp's drivers for Ubuntu but had no luck there either 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  



×
×
  • Create New...