iLO4 v.2.78 available. HPE requires users update to this version immediately.
Hoping that the HDD PCB can be exchanged with an PCB of the G9/G10 series.
I know it has to be 4x 3.5"
But it has to fit by screws.
The connectors are: 4x sata-like connector with Power molded like an SAS connector.
The info that i could find on the cage is:
***CRITICAL*** iLO 4 update available here. HPE requires users update to this version immediately. Potential vulnerabilities in network stack.
A potential security vulnerability has been identified in Integrated Lights-Out 5 (iLO 5), Integrated Lights-Out 4 (iLO 4), and Integrated Lights-Out 3 (iLO 3) firmware. The vulnerability could be remotely exploited to cause memory corruption.
HPE has released updated firmware to mitigate these vulnerabilities.
As of June 2020, what are the latest versions of firmware for HP Microserver Gen8 to be installed on the system itself? Also do any other components have updatable firmware/os-independent software?
So far my list is as follows:
BIOS - J06 (04/04/2019) iLO 4 - v2.73 (11/02/2020) Intelligent Provisioning - v1.71 (20/02/2019)
and I guess the following could also be added (although both out of date):
Smart Update Manager (HP SUM) - v8.1.0 (21/12/2017) Service Pack for ProLiant (06/11/2017)
Date formated as DD/MM/YYYY.
I believe all the B120i Smart Storage stuff is part of Intelligent Provisioning.
Hello all, i am very new to all of this, i have a ml10 gen 9 with unraid on at the moment but i have used all 4 bays that come with it, can someone help or show me what i need or could doto be able to put more HDD in the system.
At the moment i have one for parity, one for cache and two for storage.
Hope someone can help.