rebz7 Posted January 19, 2016 Share Posted January 19, 2016 Hi, I have installed a P410controller into my MS gen 8 server however when trying to create an array the physical drives are not detected! they are however detected with the on-board B120i controller. Any advice would be greatly appreciated. Thanks, Link to comment Share on other sites More sharing options...
schoondoggy Posted January 19, 2016 Share Posted January 19, 2016 When you moved the cable from the motherboard to the P410 did you check to see that it clicked into place? Link to comment Share on other sites More sharing options...
tdkmatt Posted January 20, 2016 Share Posted January 20, 2016 If the drives are being detected on the B120i, that means you did not move the cable from the mobo onto the first lower port on the P410 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now