I'll try to give a l the pertainent details.
I have a Lenovo Flex 4 1580 that came with a 512GB Liteon SSD. That drive failed, and I'm trying to replace it with a 1TB Sandisk SSD.
I used network PE boot to launch the restore, and then used ctrl-alt-shift to run diskpart. In diskpart, I created the two partitions on the existing drive, a 1GB WINRE_DRV partition and the remainder of the disk (I think) as a primary NTFS partition (which came out to 930GB approx).
After restoring 100% (0% remaining, more precisely), it timed out and gave this error:
[08/19/2019 00:33:04 664] RestoreHelper::FixBootBlock: fixing boot block [08/19/2019 00:33:04 664] RestoreHelper::ExtendVolume: extending the volume [08/19/2019 00:33:27 664] Restoring ESP [08/19/2019 00:33:27 664] existing offset: 0x0, size: 0x4400 [08/19/2019 00:33:27 664] existing offset: 0x4400, size: 0xfbc00 [08/19/2019 00:33:27 664] existing offset: 0x100000, size: 0x6400000 [08/19/2019 00:33:27 664] existing offset: 0x6500000, size: 0x8000000 [08/19/2019 00:33:27 664] existing offset: 0xe500000, size: 0xe891900000 [08/19/2019 00:33:27 664] Found existing volume [08/19/2019 00:33:27 664] existing offset: 0xe89fe00000, size: 0x41000000 [08/19/2019 00:33:27 664] existing offset: 0xe8e0e00000, size: 0x1fbe00 [08/19/2019 00:33:27 664] FormatPartitionEsp called for disk \\?\PhysicalDrive0 [08/19/2019 00:33:27 664] Formatting ESP partition at offset 0x8100000 [08/19/2019 00:33:27 664] ERROR: FormatPartitionEx failed, error 0x80042405 [08/19/2019 00:33:27 664] ERROR: FormatPartitionEsp failed, error 0x80042405 [08/19/2019 00:33:27 664] RestoreHelper::T_Restore: failed to restore ESP, error 0x80042405 [08/19/2019 00:33:27 664] RestoreHelper::T_Restore: restore complete with return value 536870914 [08/19/2019 00:33:27 664] ERROR: CDialog_Restore::Completed failed, HR=0x80070002 (at func: CDialog_Restore::Completed, admin\serveressentials\backup\pc\bmr\restorewizard\dialog_restore.cpp (97) I tried the instructions in Client BMR failed for UEFI machine in advanced mode , but the calculation in powershell yielded a non-integer, negative number of -2048.74120616913.
Based on the article, I'm assuming that instead of padding, I need to reduce the size of SOMETHING by 2GB, but I'm not clear how to do that so it lands on precisely the same address, particularly because of my fractional results from the powershell calculation.
Is there a way to determine the EXACT sizes for the WINRE_DRV, Windows, EFI, and MSR partitions from the backup itself. It seems odd that it handles what should be a straightforward restore so poorly (and manually). the Restore UI provides "human readable" sizes, but what is really needed are exact sizes in MB blocks, apparently.
Thanks for your assistance. This was my primary client machine and I really need it back!
It's that time of year again (plus or minus a few months) for Windows owners to pour out a suitable beverage, switch on the TV (say to a cricket match in Summer) and multiplex those activities with updating Windows on one's devices.
This time round I reverted to an 'in place' upgrade using the Upgrade now button at https://www.microsoft.com/en-gb/software-download/windows10, wondering whether my shared folder setup would be destroyed as it had been in previous upgrades … but no, in general all went smoothly for:
HP Microserver N36L
HP Microserver N54L
HP Microserver Gen8 x 2
These are pure file servers running W10 Professional.
The only point to note is the continued absence of the CPU usage trace on the Gen8 Task Manager graph.
I just upgraded my laptop to the latest Windows 10 1903 (18362.53) which is in release preview. The following issue may or may not be resulting from that.
My WS2012R2 Essentials server is now reporting this laptop as Offline. On the other hand the connector icon on the laptop is green, I can launch the Dashboard through it, so everything seems to be connected.
More importantly, I now cannot backup this laptop: it tries and complains that it cannot connect to the WS Essentials Client Computer Management Service. I have tried reinstalling the Connector to no avail. It used to work a couple of weeks ago, before this upgrade, but in principle it could have been some other unrelated change.
Does anyone else have a similar problem with Windows 1903? Or is it just me? Is there something I can try?
Microsoft is changing the update policy for windows 10 per this article on thurrotts website
a couple of years ago, I stopped using a windows 10 homeserver because the update cycles kept breaking things
this new announcement could cause some reconsideration of this.
Don't think I am going to replace my Qnap nas anytime soon -its been rock solid
but if I where building a new server, would consider it.
wouldn't be hard to set up machine with a lot more capability than most NAS's without laying out 400 bucks for a windows server license
and you can use Drivepool, which I miss from my W10 server
I've looked up a lot of topics about this, but i've always find the half of the answers to my questions. I guess it's an unusual situation this time...
I would like to install windows 10 to my server in AHCI mode but without intelligent provisioning (it's died while upgrading it so there is no option to use it, that's another topic).
I'm able to boot the windows installer from iLO remote console but it cannot find the hdd driver. I've tried with few drivers, but no luck.
When the raid controller is the selected controller (the raid would be perfect too), the installer doesn't boot up.
-AHCI mode on( the installer is boots up in this mode only)
- No intelligent provisioning
-HP smart array won't load either
-This concept is possible?
-If yes, the raid is possible without IP and HP smart array?
-Is this will be easier with VMware esxi?
Thanks in advance!