Jump to content
RESET Forums (homeservershow.com)
wrouffa

Windows 10 Restore from WHS V1 Backup

Recommended Posts

wrouffa

I require some guidance.

 

I own an HP MediaSmart Server running WHS V1.  In addition I have a series of computers which I backup to the server on a regular basis.  Recently I upgraded two of then from Windows 7 to Windows 10.  I was able to successfully install the connected software and have continued to run backups with no issues.  I now need to access some of the backups.  When I try to restore (manage) a backup on the server it goes through the normal "opening" process but at the end when the file explorer window pops open, it flashes open momentarily and then closes.  I'm guessing this is an issue with Windows 10 and the new File Explorer. 

 

Does anyone have suggestions on how I might proceed to access the backups?

 

thanks!

Share this post


Link to post
Share on other sites
Technogod

Does it exhibit the same symptom when opening backups on another computer with an OS other than Windows 10? 

Share this post


Link to post
Share on other sites
wrouffa

unfortunately without running a reinstall of windows 7 I don't have one available to test that. 

Share this post


Link to post
Share on other sites
Drashna Jaelre

Do you have a Z:\ drive on the system?

 

Also, ... it may be that the driver for file restore is not compatible with Windows 10.  Nothing can be done about that, at this point.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • wigster
      By wigster
      Hi,
       
      I just upgraded my laptop to the latest Windows 10 1903 (18362.53) which is in release preview. The following issue may or may not be resulting from that.
       
      My WS2012R2 Essentials server is now reporting this laptop as Offline. On the other hand the connector icon on the laptop is green, I can launch the Dashboard through it, so everything seems to be connected.
       
      More importantly, I now cannot backup this laptop: it tries and complains that it cannot connect to the WS Essentials Client Computer Management Service. I have tried reinstalling the Connector to no avail. It used to work a couple of weeks ago, before this upgrade, but in principle it could have been some other unrelated change.
       
      Does anyone else have a similar problem with Windows 1903? Or is it just me? Is there something I can try? 
    • Al_Borges
      By Al_Borges
      Microsoft is changing the update policy for windows 10  per this article on thurrotts website
       
       https://www.thurrott.com/windows/windows-10/204359/microsoft-makes-major-changes-to-windows-10-updating
       
      a couple of years ago, I stopped using a windows 10 homeserver because the update cycles kept breaking things
       
      this new announcement could cause some reconsideration of this.  
       
      Don't think I am going to replace my Qnap nas anytime soon -its been rock solid
      but if I where building a new server, would consider it.
       
      wouldn't be hard to set up machine with a lot more capability than most NAS's without laying out 400 bucks for a windows server license
       
      and you can use Drivepool, which I miss from my W10 server
       
       
    • sallai97
      By sallai97
      Greetings!
       
      I've looked up a lot of topics about this, but i've always find the half of the answers to my questions. I guess it's an unusual situation this time...
       
      I would like to install windows 10 to my server in AHCI mode but without intelligent provisioning (it's died while upgrading it so there is no option to use it, that's another topic).
      I'm able to boot the windows installer from iLO remote console but it cannot find the hdd driver. I've tried with few drivers, but no luck.
      When the raid controller is the selected controller (the raid would be perfect too), the installer doesn't boot up.
       
       
      Parameters/facts:
      -AHCI mode on( the installer is boots up in this mode only)
      - No intelligent provisioning
      -HP smart array won't load either
      -2 hdd
       
      Questions:
      -This concept is possible?
      -If yes, the raid is possible without IP and HP smart array?
      -Is this will be easier with VMware esxi?
       
      Thanks in advance!
       
       
    • Al_Borges
      By Al_Borges
      the selection and quality of the windows 10 store apps   has taken a turn for the better in the last few months
       
      Software publishers have started to load in their win32 apps  in the Store
       
      The big one is  Itunes  of course.    I dont use Itunes per se but a program I use ( mediamonkey)  requires it to be installed to sync to Ipods and Iphones
       
      The big advantage of loading in Itunes this way  is that it leaves behind all the other crud  ( apple updater, Bonjour etc) and just does Itunes
       
      But there are several others that I have used and can recommend.  In some cases the author asks for a small fee for the program via the store.  but you can install on any  of devices hooked into your account and updates are handled thru the MS update process
       
      Paint.net  a solid paint/photoshop type program.  Very good program that I have used for many years.    This is the program that should have replaced MS Paint, rather than the POS  Paint 3D
       
      Libre Office   full featured office suite -  fork of the openoffice project  solid program  more like MS Office than the google office suite.  One of my daughters went to school using this and wrote her PHD thesis with it.  
       
      Irfranview  Lightweight handy image viewer/editor.     I have used this program for over 20 years !!!!     If I need to just crop or lighten an image to paste into another document,  this is what I use.   
       
      Inkscape   open source Vector drawing program -    similar to Adobe Illustrator  and visio     dont use this program often  but  since visio isnt part of the standard office 365 package,  a good program to have loaded up 
       
      Autodesk CAD Mobile    Dont confuse this for a full featured CAD program , but for viewing and marking DWG files or creating simple CAD profiles,  this free program works fine
       
      Please feel free to pass along other useful items you found in the windows store
       
    • JackoUK
      By JackoUK
      After 2 disk failures … and the W10 April update … and the first patch Tuesday …
      … I've been spending a lot of time moving data and testing this past 2 weeks.
       
      I prompted the so called '1803 feature update' immediately it was available via Windows Update, having prepared via Insider test builds.
      The process went through slowly but steadily on all my machine types … which you will see from my signature are all pretty old and low powered devices.
      There was a vestigial File Explorer item which once closed left everything intact bar the usual window rearrangement/prompts $MSFT likes to make to File Explorer and Edge.
      Oh and the usual additional forcing tactics e.g. you see a yellow warning flag on the defender security notification icon if you are logged on to a local account rather than a Microsoft email account. 
       
      Only 1 bug to speak of - I have not experienced the problems others have been reporting in the press.
      The HOMEGROUP feature has been removed from this release with a likely side effect: other network machines and their shared file systems no longer appear under Network Places.
      They are accessible but one has to type the machine name in the File Explorer address bar e.g. \\HPMICROSERVER5 to start any action.
      Since I have been moving lots of files around I have also noticed that the network is not as stable as before: a remote shared area can be accessible one minute but not the next.
       
      No showstoppers for me (famous last words).
       


×
×
  • Create New...