Jump to content
RESET Forums (homeservershow.com)

  • Dave

    Creating the Mona-Server Mounting a WHS on plexi-glass & hanging it on the wall by “jvk.”


    I've never been a traditional type of guy, I guess that is why I'm taking on this project. While listening to podcast #93, someone (I believe it was Jim) mentioned that he was thinking of mounting one of his servers on plexi-glass and hanging it on the wall. Absolutely brilliant!!! I just happened to have a lot of hardware laying around that I will be using to build my next WHS when vail is finally released as a product, so I thought why not, lets build the Mona-Server and make a piece of art out of it (form and function in one).

    To build the Mona-Server I bought a piece of Plexi-glass at home depot and a cheap frame at Ross.

    Posted Image

    A quick cut with the circular saw and I have the plexi-glass mounted in the frame.

    Posted Image

    To hide some of the wires, and make the frame appear to float on the wall, the frame will be attached to a 3/4" piece of plywood.

    Posted Image

    The plywood backing will also give me a place to mount the DVD drive in. Here the recess for the drive is being marked.

    Posted Image

    This is a shot of the backside of the frame with the plywood backing attached and the dvd recess cut.

    Posted Image

    The picture below shows the dvd drive mounted in the frame.

    Posted Image

    Here is a side view of the dvd drive mounted in the plywood backing. When the dvd drive is closed it will not be visible since the side of the plywood backing will be painted black to match the frame and dvd drive bezel.

    Posted Image

    This picture shows the general layout of the main components (Motherboard, dvd drive, and hard drive.

    Posted Image

    So that is as far as I have gotten this weekend. The next steps are to lightly sand the plexi-glass so that it takes on a frosted appearance. The plywood frame will be painted black on the side and back, and the face that is visible thru the plexi-glass will be white. The motherboard will be mounted on standoffs that will be glued to the plexi-glass using a product called "weldon #4". I used this stuff before on my salt water reef tank, and basically it chemically melts the two pieces of plexi-glass together. The server will be set up to accept 3 or maybe 4 2.5" hard drives and they will be mounted to plexi-glass drive cages that will also be glued like the Mother board standoffs. a large hole will be drilled in the center behind the motherboard to allow for wires to pass thru. A hole will also be drilled behind each drive for the power and SATA cables. I am also thinking about putting some LED lights around the perimeter of the plexi-glass so that it kind of glows and maybe a few LEDs behind the frame so it has an indirect lighting affect. As far as a powersupply is concerned, I really don't want to mount a bulky ATX powersupply on the wall so I am opting for a Pico PSU. Basically, the Pico PSU clips into the ATX motherboard connector and the actual powersupply itself is an external brick.

    Here is a picture of a Pico PSU I have mounted in another project.

    Posted Image

    I know what you are thinking, will it have enough power? The Pico PSU puts out 160 watts, and by my calculations, the computer with 3 drives, a dvd drive, the dual core CPU, Memory, and the Motherboard itself will draw about 140 watts under load. Additionally my current WHS (a single core in a chenbro case) with 3 3.5" drives runs on an external powersupply, and my media center PC in the bedroom also runs on an external brick powersupply.

    Here are the hardware stats...

    ASUS M4A785-M motherboard

    AMD Athlon II X2 250 3.0GHz Socket AM3 Dual Core Processor

    2 GB RAM

    3 2.5" Hard Drives

    Slim DVD writter

    PICOPSU-160-XT Powersupply with external PowerBrick


    Here I have a drive mounted in one of the cages. This cage will later be glued to the plexi-glass surface along side the motherboard.

    Posted Image

    You might notice that I "frosted" the plexiglass by lightly sanding it.

    The picture below you can see one of the drive cage parts before and after sanding

    Posted Image

    All the plexi-glass will be sanded in this project, this serves 2 purposes. First it helps me hide imperfections in my work as well as it helps to disguise the locations of wires. Second, when I get the LEDs put in the side of the frame, the rough surface should help pick up and reflect the LED light.

    The only other thing I did today was begin to markout where on the Plexi-glass face the mother board will be mounted. I also drilled the main wire pass thru hole that will be used to run the wires behind the motherboard.

    Posted Image

    Tomorrow I'm off to home depot again to get some hardware and acrylic rod which I will use 9/16" lengths of to act as Mother Board standoffs. I also placed an order yesterday with Directron.com for the Lights, powerswitch for the lights, a DVD riser card for the slim dvd drive and finally a powerswitch for the computer itself.


    I was wondering how I was going to attach the frame to the plywood backing, first I thought of using glue, but then that would be permanent and if I needed to take it apart to swap out the dvd drive, I would be out of luck. In keeping with the form and function in one theme, I decided to thru-bolt the frame to the plywood backing with atique brass looking furniture fittings.

    Here you can see the frame attached to the plywood backing for the first time...

    Posted Image


    Here is LED Lighting power switch with some scrap hardware I had laying around to serve as a mount.

    Posted Image

    Here is the switch and mounting hardware assembled.

    Posted Image

    Motherboard Power switch and LED lighting switch installed in plywood backing.

    Posted Image

    This is the glue that I am using to weld acrylic to acrylic.

    Posted Image

    Notice that label... I accidently dripped a little and it is very destructive. If you ever try to use this stuff, use it at your own risk!!! I am in no way qualified to be working with this stuff and I take a lot of care to use gloves and eye protection. If you would like to learn more about working with acrylic I highly recomend checking out Melev's Reef. This guy is a master at working with acrylic!

    It might be hard to see, but here I have glued small brackets to the acrylic face to serve as shims to hold the acrylic tightly between the frame and the plywood backing.

    Posted Image


    I finally got everything marked out the way I want it. We have decided to go with 3 2.5" drives. The mother board (a micro ATX) will be mounted in a diamond shape, and the drives will be along the perimenter. I/O Ports will be facing down towards the DVD drive so I can plug cables in easily if necessary.

    Marking everything was a snap since the acrylic is clear... Mark it on the back with a dry erase marker, and you can see it from the front. When things are glued up, just erase the lines on the back.

    Posted Image

    Here the first hard drive is being glued to the acrylic face.

    Posted Image

    After the glue dries a few hours later, this is the result. (The drive is screwed to the acrylic mounts so it can be easliy removed.)

    Posted Image

    Here you can see how the wires are run behind the drive. I chose a yellow SATA cable in honor of the Lakers Win!

    Posted Image

    This is what the drive cage looks like from the side.

    Posted Image


    In this picture, you can see the 1/2" long acrylic standoffs that I made versus more traditional motherboard standoffs (sometimes called "jack screws")

    Posted Image

    I needed my standoffs to be taller so I can run wires behind the motherboard. I happened to be pre-drilling the holes for the motherboard screws when I noticed that the LED light on my cordless drill was illuminating the acrylic. This is the exact effect that I am going for when I mount the LEDs to the Mona Server in the future.

    Notice that the sanded acrylic rod picks up the LED light and reflects it, pretty cool! Hopefully my LED lights will have the same effect.

    Posted Image

    Another angle of the illuminated acrylic.

    Posted Image

    I also worked on the last bit of fabrication of the plywood backing.

    This hole will hold the power plug from the brick powersupply.

    Posted Image

    This shot shows the power plug installed and wires fished thru the plywood backing.

    Posted Image

    Finally done with the fabrication, now on to the paint booth (my patio next to the BBQ grill).

    Posted Image

    I also finished sanding or "frosting" the plexi-glass today.

    Here you can see all the motherboard standoffs and drive cage brackets attached and sanded

    Posted Image

    Here you can see the motherboard attached to the acrylic (this shot is taken from the back side)

    Posted Image

    The 1/2" space between the acrylic backing and the motherboard serves as a great place to run wires.

    Posted Image

    With the motherboard and two hard drives mounted, I can begin to run wires. The goal here is to hide as many of the wires as possible.

    Posted Image

    I kind of want to use this as a teaching tool to people that don't know that much about computers or windows home server. We are going for a simple clean look that will make it easy for people understand how it works. For example, different colored SATA cables help viewers follow which wire is for what drive.


    This is one of the custom wiring harnesses that I made, this particular one powers 2 hard drives...

    Posted Image

    Here is the plwyood back board freshly painted. Just a little touchup and then I'll attach the DVD drive...

    Posted Image


    Here is a shot of the back of the Mona Server - the silver brackets at the top hold it to the wall.

    Posted Image

    And Finally I get to hang Mona on the wall!

    Posted Image

    It really took a moment for me to re-assure myself that it was ok to let go when I hung it on the wall, I mean, what would happen if it dropped. The mounts are screwed into the studs in the wall so it is very sturdy.

    A Side view of Mona

    Posted Image

    Here the DVD drive is open... If you look close, you can see a fresh copy of Vail Beta in the drive

    Posted Image

    Believe it or not, this is the side that the DVD drive, power switch, and LED light switch are on. They kind of disappear into the shadows.

    Posted Image

    And now the moment everyone has been waiting for...

    Its alive!

    Posted Image

    I took it off the wall to do the install... actually I put it on the floor.

    Installing Vail...

    Posted Image

    A picture of the DVD drive humming along...

    Posted Image

    A Closeup of the Pico PSU and memory...

    Posted Image

    The plans are that when VAIL is a real product, this will be my new WHS. When it comes time, I'll probably move it to a better location on the wall and modify the wall to have a little inlet where there will be a plug and network port built in behind the Mona Server.


    I decided to glue the LED lights into the acrylic backing and partially into the motherboard standoffs. To do this I drilled small holes into the acrylic for the LEDs and then glued them in place. Originally I tried hot glue, but I was concerned about how permant the bond would be. Additionally I was worried that if the LEDs got too warm, the glue might melt, so instead I opted for plain old Krazy glue (cyanoacrylate)

    Gluing the LEDs inplace...

    Posted Image

    Here the LEDs are begining to be soldered

    Posted Image

    And here is the custom wiring job after the soldering and heat shrinking is complete... I know, it is a lot of wires but all of them are hidden from view in the front.

    Posted Image

    So its done!!! I tested the lights with a pair of AA batteries (putting out 3 volts combined) and the lights look sweet! All that is left to do is plug it in for a final time and test the operation of the light switch and we are done!!!


    So I put mona on the floor so I can plug in a mouse, keyboard and a monitor to do the final test.

    USB mouse plugged in.... check

    USB keyboard plugged in.... check

    VGA monitor cable plugged in.... check

    Network cable plugged in.... check

    Brick powersupply plugged into mona....

    Thats funny, when I plugged in the brick powersupply I got a spark where the brick plugs into the special round power fitting in the plywood backing of Mona and all the blue LED lights that I just installed flashed for a second. Oh well, its plugged in now, but Mona didn't power on. With this model Pico PSU, the first time it gets plugged in, it always powers on the computer, but mona isn't turned on. Hmmmm.... I push the power button and Mona doesn't turn on.

    Ok now I'm starting to get worried. I unplug the power cable from the surge protector and plug it into another plug and it was like the 4th of July. All the Blue LED lights started twinkeling (which they are not supposed to do) and smoke starts emnating from the back of the acrylic panel where the LED lights are glued. (insert your favorite combination of explectives here...) I'm frying mona! Quickly in a panic I flip off the LED light switch but it was too late, smoke was now lingering in the air and the smell of buringing Krazy glue now stained my pride in the Mona-Server project. Not Mona, it can't be!!!!


    With my head in my hands, kneeling on the floor, I think to myself how could I be so stupid, why didn't I check the voltage of the SATA power wire that I tapped into to power the LED lights? Why didn't I spend the time to calculate the voltage loads, why why why!!! Now my project is ruined... but wait, what is that sound, i look up at the Motherboard and see that the CPU fan is still spinning, and the red light on the back of the DVD drive is still on, and the little green light on the mother board is illuminated, I don't know what it means, but it is on!!! Could it be? It can't be... but a glance at the monitor confirmed my hopes, this windows home server logon screen!

    Posted Image

    Mona didn't experience a toasty demise after all!!! Lesson learned, never again will I trudge along without testing twice before turning on the power switch, especially after "McGyvering" something together.







    Editor note:  The day-to-day building of Mona-Server by “jvk” can been seen in the forums here.


    User Feedback

    Recommended Comments

    really great idea I may have to do a similar project myself. The power supply is the biggest problem as i see it. But hey thanks for the great idea.
    Link to comment
    Share on other sites

    Don't suppose you could update the image links? Sounds like a great project (and looks like it from the video), but it would be great to see the images you are discussing here. Thanks!
    Link to comment
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Our picks

    • I throw this out every once in a while.  Is anyone interested in writing up "semi-formal" reviews here on the forums?  I say semi-formal because they don't have to be pro level, just a good attempt at telling the story about the gear.  Something you have purchased lately.  You don't have to go buy stuff, just incorporate what you have already have purchased.  Hit me up with any questions.  You never know where it will lead!
        • Like
      • 3 replies
    • D-Link has dropped a couple of new products and additions to their lineup of smart home gear.  Hold on because there is a lot of gear!
      Let's start with cameras.  D-Link has new Wi-Fi cameras, the Full HD Pan and Tilt Pro Wi-Fi Camera (DCS-8302LH) and Full HD Indoor and Outdoor Pro Wi-Fi Camera (DCS-8526LH).  These are not just new, and good looking cams, they can now perform people detection and glass break detection.  The new cameras also feature expanded ways for customers to save video, including ONVIF Profile S, which enables custom storage and streaming options to personal NAS devices, built-in storage microSD capacity up to 256 GB, as well as free and paid cloud storage options. 

      This year's camera models include both an indoor and an outdoor model. The outdoor model features a spotlight and siren that can be triggered when motion is detected, deterring potential intruders. The indoor model pans around to give a full 360-degree view of any room and tracks motion. Both include two-way audio. 
      Full HD Pan and Tilt Pro Wi-Fi Camera is the model (DCS-8302LH), available in Q2, 2020, and retail pricing will be $99.99.
      Full HD Indoor and Outdoor Pro Wi-Fi Camera is the model (DCS-8526LH), available in Q3, 2020, and retail pricing will be $119.99.
      One of my favorite products is Wi-Fi.  D-Link has a whole lot of new products coming including Wi-Fi 6, Mesh, Alexa and Google Assistant integration, IFTTT, Parental Controls, and more!

      There are so many new SKU's that I can't make heads or tails of them!  I'm going to be speaking with D-Link more this week and will sort all of these out. I do want you to see all they are offering and what the release date and projected retail pricing will be.

      AC1900 Scalable Mesh Wi-Fi Router (COVR-1900-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Router (DIR-1750-US), Q1 2020, $99.99
      AC1900 Mesh Wi-Fi Router (DIR-1950-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Range Extender (DAP-1755-US), Q1 2020, $99.99
      AC1950 Mesh Wi-Fi Range Extender (DAP-1955-US), Q1 2020, $109.99
      Smart AX1500 Mesh Wi-Fi 6 Router (DIR-X1560-US), Q1 2020, $119.99
      Smart AX1800 Mesh Wi-Fi 6 Router (DIR-X1870-US), Q2 2020, $139.99
      Smart AX2400 Mesh Wi-Fi 6 Router (DIR-X2460-US), Q3 2020, $159.99
      Smart AX5400 Mesh Wi-Fi 6 Router (DIR-X5460-US), Q1 2020, $279.99
      AX1800 Mesh Wi-Fi 6 Range Extender (DAP-X1870-US), Q2 2020, $129.99
      AX1800 Whole Home Mesh System (COVR-X1872-US), QX22020, $269.99
        • Like
      • 0 replies
    • RESET Merch Shop
      Get ya Merch here!  I've created a T-Shirt shop with the famous RESET paperclip. I've pasted that clip on just about everything so you can wear it around town!  Cable bags, Coffee Mugs, T-Shirts, and more. 
      or you can get it it via
      Here is the main design.

      Below is a part of the order that I put in!  

      The Heather Grey above is the Extra Soft version and it is awesome.  I highly recommend the softness!    The "Chili Red" is the Tri-Blend and probably my favorite feel and color.

      This is the Zip-Up Hoody, Heather Indigo, Sponge Fleece, Men's, Large.  In my podcast I couldn't remember what style it was but it is Sponge Fleece. It's REALLY soft on the inside. Soft outside as well. The only problem is with the zip up hoody the logo is on the back. Regular hoody, it will be on the front.
      or you can get it it via
      Thank you for supporting this community. Everything you purchase will help keep the lights on the hard drives spinning.
      • 0 replies
    • OneDrive Personal Vault and expandable storage
      Microsoft's OneDrive has a few new features and options worth pointing out.  Personal Vault and Expandable Storage.
      Personal Vault is a protected area in OneDrive that can only be accessed with a strong authentication method or a second step of identity verification, such as your fingerprint, face, PIN, or a code sent to you via email or SMS. 
      Personal Vault gives you an added layer of protection for your most important files, photos, and videos—for example, copies of documents such as your passport, driver’s license, or insurance information—should someone gain access to your account or device.
      Plus, this added security won’t slow you down. You can quickly access your important documents, photos, and files with confidence wherever you are, on your PC, OneDrive.com, or your mobile device.

      Beyond a second layer of identity verification, Personal Vault also includes the following security measures:
      Scan and shoot—Using the OneDrive app, you can scan documents or shoot photos directly into your Personal Vault, keeping them off less secure areas of your device, like your camera roll.
      Automatic locking—No need to worry about whether you left your Personal Vault or your files open—both will close and lock automatically after a period of inactivity.
      BitLocker encryption—On Windows 10 PCs, OneDrive automatically syncs your Personal Vault files to a BitLocker-encrypted area of your local hard drive.
      Restricted sharing—To prevent accidental sharing, files in Personal Vault and shared items moved into Personal Vault cannot be shared.
      Taken together, these security measures help ensure that Personal Vault files are not stored unprotected on your PC, and your files have additional protection, even if your Windows 10 PC or mobile device is lost, stolen, or someone gains access to it or to your account.
      Expandable Storage
      If you are and Office 365 Subscriber you get 1 TB of OneDrive storage space with all the other Office goodies like Word, Excel, etc.  I know personally that I have gone over the 1TB limit and have always wanted to be able to add additional storage to my account.  Now you can!

      Pick and option and keep on hoarding, errr, I mean saving! Cancel anytime, upgrade at any moment.
      • 1 reply
    • Ubiquiti adds new items to the Unifi Line including UAP Flex HD and the Unifi Dream machine
      Ubiquiti has been busy.  There area ton of new items to recently released and I'm going to share two of my favorites.
      The UAP Flex HD and the Unifi Dream machine. The Flex HD is a mouthful of descriptors like most of UI gear is.  It's a 2Ghz 2x2 MIMO, 5GHz 4x4 MU-MIMO, POE, Indoor/Outdoor, multi mount, mesh point that is no bigger than a can of Coke.

      You will still need the Unifi controller although you can configure it with basic functionality with the Unifi App.  I've always found it's best to configure with your controller and then use the app as an add-on.  There are several mounting options that include sitting it on a shelf! That is something that Unifi has not had before unless you count the ceiling AP I have awkwardly mounted placed on top of a few books.  It can be found on the Unifi store for $179.
      The Dream Machine is an altogether different beast that I hope lives up to its naming.  This is the gateway drug, for lack of a better term, to the Unifi world.  The starter kit.  It is an Access Point, Gigabit Switch, Security Gateway, and the Cloud Key all in one package.  The latter being the most significant as this is something that has deterred new users from getting started with Unifi.  Requiring new users to purchase a $100 item just to run the AP's has been somewhat of a roadblock in the past.  Granted, that is improving every year with the ability to run it in the cloud, on a NAS, a Pi, Docker, MacOS, and of course Windows, it is still a barricade to getting up and running when manufacturers such as Eero offer simplicity in an app.

      The switch includes 4 LAN Ports and 1 WAN port.  All of which are Gigabit and security services such as IPS are rated at Gigabit speed. It's $299 in the Unifi store but I'm unsure how nicely it will play with other Unifi gear.  This may be a nice "first AP" with its built in Cloud Key if you can add additional units or other Unifi access points.
      • 4 replies
  • Create New...