Jump to content
RESET Forums (homeservershow.com)
  • Guest post by forums member: ikon

     

    Zalman (http://www.zalman.com/eng/main.asp) is pretty well known for their computer accessories, particularly their CPU and GPU cooling products. Over the past few years they have expanded their line to include cases, power supplies, VGA cards, hard disk enclosures, and others.

     

    Recently, Zalman released a 2.5” hard drive enclosure that brings a new wrinkle to the genre. The VE200 enclosure, in addition to providing the usual USB hard disk features, has the ability to act as a virtual CD/DVD drive.

     

    What is the point of a virtual CD/DVD drive? Well, if you load .ISO files onto the drive in the enclosure, it can mount them and present them to a computer as if they are real CDs or DVDs. Imagine being able to have all your installation CDs/DVDs on one device and to use a small LCD display to pick and choose which one you want to use — pick an ISO, mount it as a CD or DVD, and boot the computer from it exactly as if it was in a physical CD/DVD drive. At the very least it greatly simplifies installing Operating Systems on devices like netbooks that have no Optical Disk Drive.

     

    ZM-VE200_03-300x98.jpg

     

    ZM-VE200_04-300x98.jpg

     

    ZM-VE200_01-300x98.jpg

     

    ZM-VE200_02-300x98.jpg

     

    ZM-VE200_m.jpg

     

    REQUIREMENTS

     

    There are a few requirements in order to obtain a working VE200 setup:

    1. The VE200 kit
    2. A 2.5” SATA hard drive
    3. A computer with a free USB2/3 port (Windows is OK; don’t know about Mac)

     

    THE SYSTEM

     

    clip_image002

     

    This is what you get.

     

    Opening the box reveals this:

     

    clip_image004

     

    So, without being too fancy, it was nicely packaged.

     

    Here are the complete contents of the boxs:

     

    clip_image006

     

    From top left: the Quick Guide, VE200. a leatherette carrying case with a small package containing a tiny screwdriver and 4 screws. Bottom row: eSATA cable and USB A-miniB cable (but not such a 'standard' one as it might appear — more on that later). Although the Zalman web site seems to indicate that it comes with a CD, mine did not.

     

    As noted in the requirements, a customer-provided 2.5" SATA hard drive is required to complete the system. Pretty much any 2.5" SATA drive will do. In other words, almost any modern laptop drive.

     

    The connection ports for the VE200 are along the top of the unit:

     

    clip_image008

     

    From left to right: an eSATA connector, a small hole that contains a Reset button, a blue LED to indicate activity, a slot containing a switch to write protect/enable the drive, and a USB 2 miniB connector.

     

    The USB connector is critical. The VE200 is completely USB powered. Although the Guide doesn't mention it, I assume this means you need to be using a USB port that has battery charging capability. I don't see how it could supply enough power otherwise.

     

    I have not used the eSATA connector. I did plug it in once, but the unit did not power up. I presume they included eSATA in order to facilitate faster-than-USB file transfers. To be honest, I haven’t really found that to be an issue, and I can’t really see the usefulness of having to plug the unit in with both eSATA and USB in order to get it to work. Everything that follows is based entirely on using the USB port.

     

     

     

    PUTTING IT TOGETHER

     

    The first step to getting the VE200 set up is to install the hard drive. To do this, the head containing the LCD display has to be separated from the case. Try resting the back of the unit on the tips of your fingers, (i.e. LCD display face up) and away from you. Now, put your thumbs on the LCD display and gently push the display away from you.

     

    If that doesn't seem to work, the head may be wedged into the case a bit too tightly. In that case, look at the diagram below. Notice that there are 2 plastic/rubber strips along the sides of the VE200.

     

    clip_image010

     

    Use the small screwdriver included with the kit to peel back the strip on one side and gently pry up the LCD head on that side to loosen it. Repeat the process on the other side. This should get the head far enough out of the case that you can pull it the rest of the way.

     

    clip_image012

     

    Here's a look at the business side of the LCD display head.

     

    clip_image014

     

    To install the drive, simply connect the VE200 head's SATA connector to its mate on the drive.

     

    clip_image015

     

    With the drive attached, simply slide the assembly into the case.

     

    clip_image017

     

    Once the drive and head are fully inserted into the case, complete the installation by using 2 of the supplied screws to lock the VE200's head to the case. Note: the screws do not go into the drive, only into the head, as per the photo below. This photo also shows the Jog Switch. It is a vital part of the VE200, as we'll see later.

     

    clip_image019

     

     

     

    CONFIGURING THE HARD DRIVE

     

    Once the hard drive has been installed, the next step is to configure it. But first, some background.

     

    The VE200 does not automatically configure the hard drive. This can lead to complications.

     

    The VE200 can only use the first partition/volume on the drive, even if that partition/volume is one that’s hidden in Windows

     

    Many people will likely want to use old laptop drives in VE200s. If a drive comes from a major laptop supplier such as Dell, Lenovo, HP, etc. it will likely contain an OEM recovery partition/volume. These partitions/volumes are normally not visible in Windows Explorer. This means it would be impossible to copy ISO files to the OEM partition/volume, which is the only way the VE200 would see the ISO files.

     

    To get around this problem, the hidden partition(s)/volume(s) must be deleted. I recommend simply deleting all partitions/volumes from the drive and starting afresh.

     

    This creates another issue: Disk Management in Windows can’t normally delete OEM partitions/volumes because they are protected. There are a number of utilities, free and paid, that can do this, but Windows own DiskPart can do the job and it’s provided for free with Windows. I won’t go into how to use DiskPart here; there is plenty of info available on the web and DiskPart’s own built in Help is pretty useful as well.

     

    To configure the drive, connect the VE200 to a Windows computer, using the USB cable provided with the VE200. Most USB A-miniB cables will not work; they will light up the LCD display, and it will look like it’s working, but the hard drive will not power up. Of all the USB A-miniB cables in my own stock, only 1 other would work. Most USB A-A extender cables cannot be used either. Be warned.

     

    Once the VE200 is connected to the computer, clean out any existing partitions/volumes using your utility of choice.

     

    Now that the drive has no partitions/volumes, it’s time to find out what firmware the VE200 has installed.

     

    There are 2 ‘types’ of firmware for the VE200: NTFS, and FAT32/exFAT. It’s important to know which one a particular VE200 has installed because the hard drive must be formatted to match the firmware type. Note: it may be possible to flash an NTFS VE200 with FAT32/exFAT firmware, and vice-versa, but I wasn’t about to kill my VE200 trying to find out.

     

    The Jog Switch is used to find out what version of firmware a VE200 has. With no partitions/volumes on the drive, the VE200 should show something like this on its LCD display:

     

    clip_image021

     

    The Job Switch has 3 positions: up, down, and in (or depressed). To get the version of firmware, depress the Jog Switch 4 times. Each depress will display a different screen.

     

    The first depress will show the model of hard drive in the unit. For example:

     

    clip_image023

     

    The second depress should show the drive serial number:

     

    clip_image025

     

    The third depress will show some number, but I don’t know what it is (perhaps the drive’s firmware number?):

     

    clip_image027

     

    And finally, the fourth depress will show the VE200’s firmware info:

     

    clip_image029

     

    The important item on this screen is the ‘N’ at the very end. It indicates that the firmware is NTFS (FAT32/exFAT firmware has as ‘F’ at the end). BTW, as of this writing, this is the latest firmware release.

     

    Next, create a new partition/volume on the drive. I recommend using the entire drive because the VE200 can only use the first partition. I won’t go into details on how to create a partition as there is tons of info available on the internet. The main things are to assign a drive letter to the partition/volume (so ISO files can be copied to it later), and to format the partition/volume to match the version of firmware installed in the VE200.

     

    The final step in configuring the drive is to create a directory/folder named “_iso” at the root of the newly created partition. This is critical. All ISO files must reside in this _iso directory/folder or the VE200 will NOT be able to mount them as virtual CDs or DVDs.

     

    With the “_iso” directory/folder created, the configuration of the drive is complete.

     

     

     

    Using the VE200

     

    As a first test, copy an .ISO file to the _iso directory/folder. The ISO needs to be a mountable image file. A Windows 7 or XP installation DVD ISO makes a good test case.

     

    Once the file is copied, either eject the VE200 (just like any other USB external drive) and disconnect and reconnect it, or use a paperclip to press the Reset Button on the top of the VE200. After the unit reboots it should show the name of the ISO file that was copied to it. I used a Windows XP ISO and it looks like this:

     

    clip_image031

     

    Notice the second icon from the left in the top row; the one that looks like a tire. It indicates that the ISO is mounted. Depressing the Jog Switch mounts and unmounts ISO files. So, depressing it once shows this:

     

    clip_image033

     

    Moving the Jog Switch down once will give the full name of the ISO file:

     

    clip_image034

     

    At this point I recommend trying to boot from the VE200. Make sure the VE200 shows that your ISO file is mounted, then reboot your PC and use its boot menu to select the ZMVE Virtual CDRom as the boot device. You should get the normal bootup for your computer; the same as you would get if you booted from a physical CD/DVD.

     

    After verifying that the VE200 does boot correctly, it’s use can be expanded. For one thing, it supports folders, very much like Windows Explorer.

     

    clip_image036

     

    To go into a folder depress the Jog Switch.

     

    Pushing the Jog Switch up repeatedly will eventually take you to the Level Up screen:

     

    clip_image038

     

    Depressing the Jog Switch at this screen will move the VE200 up to the parent directory/folder.

     

    It’s possible to create nested layers of directories/folders. I created a 4-deep stack without issue.

     

    I have not used the eSATA port.

     

     

     

    PROS

    • Inexpensive (around $50US). This might seem a little high for an external enclosure, but the virtual drive capability puts it in another class in my opinion.

    • Small, lightweight.
    • The kit is quite complete, even including a carrying case and screwdriver.
    • Simple to use, once the initial hurdles are overcome.
    • A very handy device that can take the place of many single-purpose bootable flash drives, CDs, and DVDs.
    • The display provides some nice information, such as the hard drive temperature. The icons are logical, well-placed, and pretty intuitive to understand, at least to a Windows user.

    CONS

    • Extremely poor documentation. If only the documentation matched the physical completeness of the kit.

    • Initial configuration is manual, and the user is left to fend for themselves, particularly with regard to getting the hard drive configured properly.
    • The Jog Switch can be difficult to use, especially trying to find the correct position so it can be depressed. Separate buttons would have been better, but likely would have added to the cost.
    • Cannot use commonly available USB A-miniB cables.
    • The supplied USB cable is too short.
    • The LCD display is small. It works, but a little larger would have been better.
    • Not every ISO can be used. I found that the Windows Home Server 2011 Client Restore Disk ISO could not be used because the VE200 would reset itself part way through the Restore Wizard. I suspect this is because the wizard reinitialized all of the USB ports as part of its normal process. On the other hand, Windows XP ran without problems.

    CONCERNS

     

    Probably my biggest concern about the VE200 is the Jog Switch. This is an inexpensive device, and the Jog Switch gets used so much that I’m concerned that it might not last too long. That would essentially make the VE200 a paperweight. Of course, it’s always possible to just get another one, and it should even be possible to transfer the hard drive from a dead VE200 to a new one.

     

    SUMMARY

     

    The VE200 is a pretty amazing device. It accomplishes its main goal very well. Keeping the Cons & Concerns in mind, I would recommend it to anyone who has a working knowledge of Windows; in other words, Power Users. Hopefully, this review/tutorial can overcome most of the lack of documentation and get people up and running faster.

     

    I am now in the midst of getting rid of most of the mostly single-purpose, bootable USB Flash drives that I use to do installations. I am copying ISO files for OS installs, MS Office, Adobe Creative Suite CS5 Production Premium, LightRoom, SpinRite, CloneZilla, and many others, to the VE200.

     

    I will now have a single place where I can find all these images, and from which I can install any of them. There will be no more inserting and removing of a pile of USB Flash Drives, trying to find the one that contains a particular install image. USB Flash Drives are certainly convenient, and they’re small, but their size also makes it hard to label them and keep them organized. They are also easily lost. The VE200 nicely addresses both of these issues.

     

    Also gone will be the issue of fighting a specific USB Flash Drive to make it bootable, only to find that this particular model of flash drive can’t be made bootable.

     

    SUMMARY

     

    I’m giving the VE200 4 out of 5 stars. The terrible documentation, the fact that the VE200 doesn’t auto-configure the drive, and concerns over the Jog Switch mainly contributed to it not getting a higher rating. However, it’s overall usefulness prevented it from getting a lower score.

     Share


    User Feedback

    Recommended Comments

    i ended up retrofitting my VE-300 with a piece of Styrofoam behind the jog switch after breaking one. Hopefully that makes it a little more reliable.
    Link to comment
    Share on other sites



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

  • Our picks

    • RT6600ax tri-band Wi-Fi 6 router   Provide ultrafast and secure wireless connectivity to your home or office with support for the expanded 5.9 GHz spectrum,* combined wireless throughput of 6.6 Gbps, and a secure network infrastructure backed by the intuitive Synology Router Manager (SRM).
      • 8 replies
    • I throw this out every once in a while.  Is anyone interested in writing up "semi-formal" reviews here on the forums?  I say semi-formal because they don't have to be pro level, just a good attempt at telling the story about the gear.  Something you have purchased lately.  You don't have to go buy stuff, just incorporate what you have already have purchased.  Hit me up with any questions.  You never know where it will lead!
        • Like
      • 5 replies
    • D-Link has dropped a couple of new products and additions to their lineup of smart home gear.  Hold on because there is a lot of gear!
      Let's start with cameras.  D-Link has new Wi-Fi cameras, the Full HD Pan and Tilt Pro Wi-Fi Camera (DCS-8302LH) and Full HD Indoor and Outdoor Pro Wi-Fi Camera (DCS-8526LH).  These are not just new, and good looking cams, they can now perform people detection and glass break detection.  The new cameras also feature expanded ways for customers to save video, including ONVIF Profile S, which enables custom storage and streaming options to personal NAS devices, built-in storage microSD capacity up to 256 GB, as well as free and paid cloud storage options. 
       

       
      This year's camera models include both an indoor and an outdoor model. The outdoor model features a spotlight and siren that can be triggered when motion is detected, deterring potential intruders. The indoor model pans around to give a full 360-degree view of any room and tracks motion. Both include two-way audio. 
      Full HD Pan and Tilt Pro Wi-Fi Camera is the model (DCS-8302LH), available in Q2, 2020, and retail pricing will be $99.99.
      Full HD Indoor and Outdoor Pro Wi-Fi Camera is the model (DCS-8526LH), available in Q3, 2020, and retail pricing will be $119.99.
      One of my favorite products is Wi-Fi.  D-Link has a whole lot of new products coming including Wi-Fi 6, Mesh, Alexa and Google Assistant integration, IFTTT, Parental Controls, and more!
       

       
      There are so many new SKU's that I can't make heads or tails of them!  I'm going to be speaking with D-Link more this week and will sort all of these out. I do want you to see all they are offering and what the release date and projected retail pricing will be.

      AC1900 Scalable Mesh Wi-Fi Router (COVR-1900-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Router (DIR-1750-US), Q1 2020, $99.99
      AC1900 Mesh Wi-Fi Router (DIR-1950-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Range Extender (DAP-1755-US), Q1 2020, $99.99
      AC1950 Mesh Wi-Fi Range Extender (DAP-1955-US), Q1 2020, $109.99
      Smart AX1500 Mesh Wi-Fi 6 Router (DIR-X1560-US), Q1 2020, $119.99
      Smart AX1800 Mesh Wi-Fi 6 Router (DIR-X1870-US), Q2 2020, $139.99
      Smart AX2400 Mesh Wi-Fi 6 Router (DIR-X2460-US), Q3 2020, $159.99
      Smart AX5400 Mesh Wi-Fi 6 Router (DIR-X5460-US), Q1 2020, $279.99
      AX1800 Mesh Wi-Fi 6 Range Extender (DAP-X1870-US), Q2 2020, $129.99
      AX1800 Whole Home Mesh System (COVR-X1872-US), QX22020, $269.99
        • Like
      • 2 replies
    • RESET Merch Shop
      Get ya Merch here!  I've created a T-Shirt shop with the famous RESET paperclip. I've pasted that clip on just about everything so you can wear it around town!  Cable bags, Coffee Mugs, T-Shirts, and more. 
       
      https://reset.threadless.com/
       
      or you can get it it via
       
      https://reset.fm/store
       
      Here is the main design.
       

       
      Below is a part of the order that I put in!  
       
       

       
      The Heather Grey above is the Extra Soft version and it is awesome.  I highly recommend the softness!    The "Chili Red" is the Tri-Blend and probably my favorite feel and color.

       
      This is the Zip-Up Hoody, Heather Indigo, Sponge Fleece, Men's, Large.  In my podcast I couldn't remember what style it was but it is Sponge Fleece. It's REALLY soft on the inside. Soft outside as well. The only problem is with the zip up hoody the logo is on the back. Regular hoody, it will be on the front.
       
      https://reset.threadless.com/
       
      or you can get it it via
       
      https://reset.fm/store
       
      Thank you for supporting this community. Everything you purchase will help keep the lights on the hard drives spinning.
       
      • 3 replies
    • OneDrive Personal Vault and expandable storage
      Microsoft's OneDrive has a few new features and options worth pointing out.  Personal Vault and Expandable Storage.
       
      Personal Vault is a protected area in OneDrive that can only be accessed with a strong authentication method or a second step of identity verification, such as your fingerprint, face, PIN, or a code sent to you via email or SMS. 
       
      Personal Vault gives you an added layer of protection for your most important files, photos, and videos—for example, copies of documents such as your passport, driver’s license, or insurance information—should someone gain access to your account or device.
      Plus, this added security won’t slow you down. You can quickly access your important documents, photos, and files with confidence wherever you are, on your PC, OneDrive.com, or your mobile device.

       
      Beyond a second layer of identity verification, Personal Vault also includes the following security measures:
       
      Scan and shoot—Using the OneDrive app, you can scan documents or shoot photos directly into your Personal Vault, keeping them off less secure areas of your device, like your camera roll.
      Automatic locking—No need to worry about whether you left your Personal Vault or your files open—both will close and lock automatically after a period of inactivity.
      BitLocker encryption—On Windows 10 PCs, OneDrive automatically syncs your Personal Vault files to a BitLocker-encrypted area of your local hard drive.
      Restricted sharing—To prevent accidental sharing, files in Personal Vault and shared items moved into Personal Vault cannot be shared.
       
      Taken together, these security measures help ensure that Personal Vault files are not stored unprotected on your PC, and your files have additional protection, even if your Windows 10 PC or mobile device is lost, stolen, or someone gains access to it or to your account.
       
      Expandable Storage
       
      If you are and Office 365 Subscriber you get 1 TB of OneDrive storage space with all the other Office goodies like Word, Excel, etc.  I know personally that I have gone over the 1TB limit and have always wanted to be able to add additional storage to my account.  Now you can!

       
      Pick and option and keep on hoarding, errr, I mean saving! Cancel anytime, upgrade at any moment.
      • 1 reply
×
×
  • Create New...