Jump to content
RESET Forums (homeservershow.com)
  • Sign in to follow this  

    Performance with my Icy Dock 5.25” ExpressCage MB326SP-B


    Joe_Miner

    By: JohnStutsman

     

     

     

    Figure01-300x199.jpg

     

    Figure 1 – Icy Dock ExpressCage MB326SP-B – 6 Bay 2.5” SAS/SATA HDD Hot Swap Cage installed in the lower 5.25” Bay of my HP ProLiant ML10v2

     

     

     

    This is Part 3 of a three part series on the Icy Dock ExpressCage MB326SP-B 6 Bay 2.5” SAS/SATA Hot Swap Cage for 5.25” Bay’s. In this part I measured the performance of my HP ProLiant ML10v2 Server with the Icy Dock ExpressCage MB326SP-B in the lower (of two) 5.25” bay.

     

    Part 1: Unboxing

     

    Part 2: Installation

     

    Part 3: Performance

     

     

     

    Performance

     

    As stated in Part 1: Recently, Dave asked me to review the Icy Dock ExpressCage MB326SP-B 6 Bay 2.5” SAS/SATA Hot Swap Cage for 5.25” Bay’s (“ExpressCage”). I had the perfect application in my HP ProLiant ML10v2 where the addition of a P222 I had 10 SATA Ports but only a main cage for four 3.5” drives and two 5.25” Bay’s. With the MB326SP-B I could put six drives in the Icy Dock ExpressCage using one 5.25” bay and still have a 5.25” bay available for future expansion or projects (a huge plus in my book). ExpressCage holds 6 drives (2 SSDs and 4 HDDs in my use case) that are the basis of three logical drives in the B120i embedded on the ML10v2’s system board.

     

    The Icy Dock ExpressCage MB326SP-B had many “Key Features” that I found very intriguing but obviously the most important in my mind was being able to install six 2.5” HDDs/SSDs up to 9.5mm thick in the space of one 5.25” half-height bay with hot-swap support and SAS/SATA – 6GB/s support. The additional features were certainly icing on the cake, especially when coupled with my positive experience with other Icy Dock products.

     

    In my opinion, this ExpressCage is living up to its predecessor’s reputations. Its feel is solid and installation was easy. This is a reliable quality product perfect for many applications of the home enthusiast!

     

     

     

    Figure02-300x156.jpg

     

    Figure 2 – Key Features of the Icy Dock ExpressCage MB326SP-B (Photo courtesy Icy Dock)

     

     

     

    Figure03-207x300.jpg

     

    Figure 3 – Storage information for the ML10v2 via iLO4 showing 10 physical drives supporting 3 logical drives on the B120i and 1 logical drive on the P222.

     

     

     

    As shown in Figure 3, above, the 10 physical drives in my ML10v2 support 4 logical drives.

     

    Three logical drives are driven by the B120i HP Dynamic Smart Array B120i RAID controller embedded on the system board of the HP ProLiant ML10v2. These three logical drives are made up from the 6 physical drives mounted in the Icy Dock ExpressCage MB326SP-B.

     

    The performance of these three logical drives, illustrated in Figures 4, 5, and 6 below, conforms with what I’ve seen in the past with these drives and assures me that the SATA interface of the Icy Dock ExpressCage MB326SP-B is transparent to the SATA signal from the B120i (i.e. I could not detect any speed degradation). All six bays of the ExpressCage MB326SP-B are rated SATA III or 6GB/s by Icy Dock but of course the transfer rates are dependent of the rated speeds of the Ports from the ML10v2 controller board where SATA Ports 1 & 2 are rated at SATA III or 6GB/s while SATA Ports 3-6 are rated at SATA II or 3GB/s.

     

     

     

    Figure04-300x156.jpg

     

    Figure 4 – Performance measured with ATTO, CrystalDiskMark, and HD Tune Pro for B120i Logical Drive 01: OS drive – 1 x Corsair Force GT 240GB SSD in RAID0 on HP Dynamic Smart Array B120i RAID Controller – Port 1 (SATA III or 6GB/s) -- Icy Dock ExpressCage MB326SP-B Bay 1 (rated SATA III or 6GB/s)

     

     

     

    Figure05-300x156.jpg

     

    Figure 5 – Performance measured with ATTO, CrystalDiskMark, and HD Tune Pro for B120i Logical Drive 02: Data drive – 1 x Samsung 256GB 840 Pro SSD in RAID0 on HP Dynamic Smart Array B120i RAID Controller – Port 2 (SATA III or 6GB/s) – Icy Dock ExpressCage MB326SP-B Bay 2 (rated SATA III or 6GB/s)

     

     

     

    Figure06-300x155.jpg

     

    Figure 6 – Performance measured with ATTO, CrystalDiskMark, and HD Tune Pro for B120i Logical Drive 03: Data drive -- 4 x WD10JUCT 1TB 2.5” HDDs in RAID10 on HP Dynamic Smart Array B120i RAID Controller – Ports 3, 4, 5, & 6 (each SATA II or 3GB/s) – Icy Dock ExpressCage MB326SP-B Bays 3, 4, 5, & 6 (each rated SATA III or 6GB/s)

     

     

     

    The fourth logical drive in my HP ProLiant ML10v2 is driven by the HP P222 Dynamic Smart Array RAID controller in card slot 3 of the ML10v2 as shown in Figure 3 earlier. The P222’s logical drive 01 performance is illustrated in Figure 7 below. The performance of this logical drive wouldn’t have been impacted by the installation of the ExpressCage MB326SP-B (except “possibly” temperature loading inside the ML10v2) but I included it in this report to serve as a complete assessment of my “As-Built” ML10v2.

     

     

     

    Figure07-300x155.jpg

     

    Figure 7 – Performance measured with ATTO, CrystalDiskMark, and HD Tune Pro for P222 Logical Drive 01: Data drive – 4 x WD 5TB SE HDDs (WD5001F9YZ) in RAID5 on HP Dynamic Smart Array P222 RAID Controller Card – Ports 1, 2, 3, & 4 (each SATA III or 6GB/s) – mounted in Bays 1, 2, 3, & 4 of drive main cage

     

     

     

    Figure08-300x122.jpg

     

    Figure 8 – Temperature distribution inside the ML10v2 via iLO4. The system fan in BIOS is set to Optimal Cooling and the system fan speed was 6% at the time of this reading. Note that the ExpressCage MB326SP-B fans were set on high and I have two additional 60mm auxiliary fans located inside the ML10v2

     

     

     

    Figure09-300x111.jpg

     

    Figure 9 – Temperature distribution inside the ML10v2 via iLO4. The system fan in BIOS is set to Increased Cooling and the system fan speed was 19% at the time of this reading. Note that the ExpressCage MB326SP-B fans were set on high and I have two additional 60mm auxiliary fans located inside the ML10v2

     

     

     

    Figure10-300x112.jpg

     

    Figure 10 – Comparison of the Temperature distributions inside the ML10v2 via iLO4 displayed in Figure 8 on the left (BIOS system fan setting Optimal Cooling & speed was at 6%) and displayed in Figure 9 on the right (BIOS system fan setting Optimal Cooling & speed was at 19%). Important to note that the Inlet Ambient temp was 2C cooler in the second scenario.

     

     

     

    Figure11-300x142.jpg

     

    Figure 11 – Firmware Version Information in the ML10v2 via iLO4

     

     

     

    Figure12-300x199.jpg

     

    Figure 12 – Top view of the back of the Icy Dock ExpressCage MB326SP-B with all SATA data and SATA power connections before inserting into the bottom 5.25” bay of the ML10v2

     

     

     

     

     

    Figure13-300x196.jpg

     

    Figure 13 – Front view of the HP ProLiant ML10v2 with the Icy Dock ExpressCage MB326SP-B installed and fully populated plus the Main drive cage is fully populated and all 10 physical drives are active – power draw with the monitor is approximately 120-130W & without the monitor it’s approximately 95-105W.

     

     

     

    Figure14-300x199.jpg

     

    Figure 14 – Front view of the HP ProLiant ML10v2 with the Icy Dock ExpressCage MB326SP-B installed in the lower 5.25” bay. Booted up to desktop view. Note Windows Home Server 2011 connector in upper left of the screen File Explorer opened showing the four logical drives in the ML10v2.

     

     

     

    As-Built (I named my Computer: SkyNet)

    • HP ProLiant ML10v2 Gen9

    • Xeon E3-1220v3
    • 32GB Unbuffered ECC RAM KVR16E11K4/32
    • B120i Logical Drive 01: OS drive – 1 x Corsair Force GT 240GB SSD in RAID0 on HP Dynamic Smart Array B120i RAID Controller – Port 1 (SATA III or 6GB/s) -- Icy Dock ExpressCage MB326SP-B Bay 1
    • OS: Windows 8.1 Pro
    • B120i Logical Drive 02: Data drive – 1 x Samsung 256GB 840 Pro SSD in RAID0 on HP Dynamic Smart Array B120i RAID Controller – Port 2 (SATA III or 6GB/s) – Icy Dock ExpressCage MB326SP-B Bay 2
    • B120i Logical Drive 03: Data drive -- 4 x WD10JUCT 1TB 2.5” HDDs in RAID10 on HP Dynamic Smart Array B120i RAID Controller – Ports 3, 4, 5, & 6 (each SATA II or 3GB/s) – Icy Dock ExpressCage MB326SP-B Bays 3, 4, 5, & 6
    • P222 Logical Drive 01: Data drive – 4 x WD 5TB SE HDDs (WD5001F9YZ) in RAID5 on HP Dynamic Smart Array P222 RAID Controller Card – Ports 1, 2, 3, & 4 (each SATA III or 6GB/s) – mounted in Bays 1, 2, 3, & 4 of drive main cage
    • Icy Dock ExpressCage MB326SP-B (I used the existing SATA cable that had gone to the optical drive for bay 5 plus a Blue 18” SATA cable I had in stock from previous projects for Bay 6; StarTech Model SAS8087S450 19” (50cm) Serial Attached SCSI SAS Cable – SFF-8087 to 4x Latching SATA for Bays 1, 2, 3, & 4; I also used a Molex Y to two SATA Power Connectors)
    • Video card – HD5450
    • 60mm Fan mounted near the bottom front of ML10v2 to increase air flow for the P222 and Video card
    • 60mm Fan mounted in empty card slot to direct air flow directly on P222 heat sink (plus Molex to Fan splitter and Y Fan to 2 Fan connector cable)

     

     

    Be sure to check out Parts 1 and 2 of this 3 part series where I cover the Unboxing and Installation of Icy Dock’s ExpressCage MB326SP-B in my HP ProLiant ML10v2.

     

    Then later, please join us in the HSS Forums to discuss this and many other interesting topics. Check the HSS Forum Thread on the ExpressCage MB326SP-B for updates and comments.

     

     

     

    References:

     

    Icy Dock ExpressCage MB326SP-B http://www.icydock.com/goods.php?id=231

     

    Other HSS Icy Dock Blog Postings http://homeservershow.com/tag/icyDock

     

    HSS Forum Posting on this ExpressCage MB326SP-B: http://homeservershow.com/forums/index.php?/topic/12114-icy-dock-expresscage-mb326sp-b/

     

    Other HSS ML10v2 Blog Postings: http://homeservershow.com/tag/ML10v2

     

    HSS HP ProLiant ML10v2 postings: http://homeservershow.com/forums/index.php?/forum/98-ml10-and-ml10v2/

     

    Icy Dock Play List

    Sign in to follow this  


    User Feedback

    Recommended Comments

    There are no comments to display.



    Guest
    This is now closed for further comments

  • Our picks

    • I throw this out every once in a while.  Is anyone interested in writing up "semi-formal" reviews here on the forums?  I say semi-formal because they don't have to be pro level, just a good attempt at telling the story about the gear.  Something you have purchased lately.  You don't have to go buy stuff, just incorporate what you have already have purchased.  Hit me up with any questions.  You never know where it will lead!
        • Like
      • 2 replies
    • D-Link has dropped a couple of new products and additions to their lineup of smart home gear.  Hold on because there is a lot of gear!
      Let's start with cameras.  D-Link has new Wi-Fi cameras, the Full HD Pan and Tilt Pro Wi-Fi Camera (DCS-8302LH) and Full HD Indoor and Outdoor Pro Wi-Fi Camera (DCS-8526LH).  These are not just new, and good looking cams, they can now perform people detection and glass break detection.  The new cameras also feature expanded ways for customers to save video, including ONVIF Profile S, which enables custom storage and streaming options to personal NAS devices, built-in storage microSD capacity up to 256 GB, as well as free and paid cloud storage options. 
       

       
      This year's camera models include both an indoor and an outdoor model. The outdoor model features a spotlight and siren that can be triggered when motion is detected, deterring potential intruders. The indoor model pans around to give a full 360-degree view of any room and tracks motion. Both include two-way audio. 
      Full HD Pan and Tilt Pro Wi-Fi Camera is the model (DCS-8302LH), available in Q2, 2020, and retail pricing will be $99.99.
      Full HD Indoor and Outdoor Pro Wi-Fi Camera is the model (DCS-8526LH), available in Q3, 2020, and retail pricing will be $119.99.
      One of my favorite products is Wi-Fi.  D-Link has a whole lot of new products coming including Wi-Fi 6, Mesh, Alexa and Google Assistant integration, IFTTT, Parental Controls, and more!
       

       
      There are so many new SKU's that I can't make heads or tails of them!  I'm going to be speaking with D-Link more this week and will sort all of these out. I do want you to see all they are offering and what the release date and projected retail pricing will be.

      AC1900 Scalable Mesh Wi-Fi Router (COVR-1900-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Router (DIR-1750-US), Q1 2020, $99.99
      AC1900 Mesh Wi-Fi Router (DIR-1950-US), Q1 2020, $119.99
      AC1750 Mesh Wi-Fi Range Extender (DAP-1755-US), Q1 2020, $99.99
      AC1950 Mesh Wi-Fi Range Extender (DAP-1955-US), Q1 2020, $109.99
      Smart AX1500 Mesh Wi-Fi 6 Router (DIR-X1560-US), Q1 2020, $119.99
      Smart AX1800 Mesh Wi-Fi 6 Router (DIR-X1870-US), Q2 2020, $139.99
      Smart AX2400 Mesh Wi-Fi 6 Router (DIR-X2460-US), Q3 2020, $159.99
      Smart AX5400 Mesh Wi-Fi 6 Router (DIR-X5460-US), Q1 2020, $279.99
      AX1800 Mesh Wi-Fi 6 Range Extender (DAP-X1870-US), Q2 2020, $129.99
      AX1800 Whole Home Mesh System (COVR-X1872-US), QX22020, $269.99
        • Like
      • 0 replies
    • RESET Merch Shop
      Get ya Merch here!  I've created a T-Shirt shop with the famous RESET paperclip. I've pasted that clip on just about everything so you can wear it around town!  Cable bags, Coffee Mugs, T-Shirts, and more. 
       
      https://reset.threadless.com/
       
      or you can get it it via
       
      https://reset.fm/store
       
      Here is the main design.
       

       
      Below is a part of the order that I put in!  
       
       

       
      The Heather Grey above is the Extra Soft version and it is awesome.  I highly recommend the softness!    The "Chili Red" is the Tri-Blend and probably my favorite feel and color.

       
      This is the Zip-Up Hoody, Heather Indigo, Sponge Fleece, Men's, Large.  In my podcast I couldn't remember what style it was but it is Sponge Fleece. It's REALLY soft on the inside. Soft outside as well. The only problem is with the zip up hoody the logo is on the back. Regular hoody, it will be on the front.
       
      https://reset.threadless.com/
       
      or you can get it it via
       
      https://reset.fm/store
       
      Thank you for supporting this community. Everything you purchase will help keep the lights on the hard drives spinning.
       
      • 0 replies
    • OneDrive Personal Vault and expandable storage
      Microsoft's OneDrive has a few new features and options worth pointing out.  Personal Vault and Expandable Storage.
       
      Personal Vault is a protected area in OneDrive that can only be accessed with a strong authentication method or a second step of identity verification, such as your fingerprint, face, PIN, or a code sent to you via email or SMS. 
       
      Personal Vault gives you an added layer of protection for your most important files, photos, and videos—for example, copies of documents such as your passport, driver’s license, or insurance information—should someone gain access to your account or device.
      Plus, this added security won’t slow you down. You can quickly access your important documents, photos, and files with confidence wherever you are, on your PC, OneDrive.com, or your mobile device.

       
      Beyond a second layer of identity verification, Personal Vault also includes the following security measures:
       
      Scan and shoot—Using the OneDrive app, you can scan documents or shoot photos directly into your Personal Vault, keeping them off less secure areas of your device, like your camera roll.
      Automatic locking—No need to worry about whether you left your Personal Vault or your files open—both will close and lock automatically after a period of inactivity.
      BitLocker encryption—On Windows 10 PCs, OneDrive automatically syncs your Personal Vault files to a BitLocker-encrypted area of your local hard drive.
      Restricted sharing—To prevent accidental sharing, files in Personal Vault and shared items moved into Personal Vault cannot be shared.
       
      Taken together, these security measures help ensure that Personal Vault files are not stored unprotected on your PC, and your files have additional protection, even if your Windows 10 PC or mobile device is lost, stolen, or someone gains access to it or to your account.
       
      Expandable Storage
       
      If you are and Office 365 Subscriber you get 1 TB of OneDrive storage space with all the other Office goodies like Word, Excel, etc.  I know personally that I have gone over the 1TB limit and have always wanted to be able to add additional storage to my account.  Now you can!

       
      Pick and option and keep on hoarding, errr, I mean saving! Cancel anytime, upgrade at any moment.
      • 1 reply
    • Ubiquiti adds new items to the Unifi Line including UAP Flex HD and the Unifi Dream machine
      Ubiquiti has been busy.  There area ton of new items to recently released and I'm going to share two of my favorites.
       
      The UAP Flex HD and the Unifi Dream machine. The Flex HD is a mouthful of descriptors like most of UI gear is.  It's a 2Ghz 2x2 MIMO, 5GHz 4x4 MU-MIMO, POE, Indoor/Outdoor, multi mount, mesh point that is no bigger than a can of Coke.

       
      You will still need the Unifi controller although you can configure it with basic functionality with the Unifi App.  I've always found it's best to configure with your controller and then use the app as an add-on.  There are several mounting options that include sitting it on a shelf! That is something that Unifi has not had before unless you count the ceiling AP I have awkwardly mounted placed on top of a few books.  It can be found on the Unifi store for $179.
       
      https://store.ui.com/collections/wireless/products/unifi-flexhd
       
      The Dream Machine is an altogether different beast that I hope lives up to its naming.  This is the gateway drug, for lack of a better term, to the Unifi world.  The starter kit.  It is an Access Point, Gigabit Switch, Security Gateway, and the Cloud Key all in one package.  The latter being the most significant as this is something that has deterred new users from getting started with Unifi.  Requiring new users to purchase a $100 item just to run the AP's has been somewhat of a roadblock in the past.  Granted, that is improving every year with the ability to run it in the cloud, on a NAS, a Pi, Docker, MacOS, and of course Windows, it is still a barricade to getting up and running when manufacturers such as Eero offer simplicity in an app.
       

       
      The switch includes 4 LAN Ports and 1 WAN port.  All of which are Gigabit and security services such as IPS are rated at Gigabit speed. It's $299 in the Unifi store but I'm unsure how nicely it will play with other Unifi gear.  This may be a nice "first AP" with its built in Cloud Key if you can add additional units or other Unifi access points.
       
      https://store.ui.com/collections/routing-switching/products/unifi-dream-machine
      • 3 replies


×
×
  • Create New...