Tag: HP Microserver

Installing WHS2011 on the HP ProLiant Gen8 MicroServer using the B120i and P222

Installing WHS2011 on the HP ProLiant Gen8 MicroServer using the B120i and P222

By: JohnStutsman Figure 1 – Preparing my Gen8 MicroServer for Installation of WHS2011   Recently, I loaded MicroSoft Windows Home Server 2011(“WHS2011”) onto my HP ProLiant Gen8 MicroServer using the HP Smart Array B120i RAID Controller and P222/512 FBWC RAID Controller to manage my OS and Data drives. Attached to the HP Smart Array B120i […]

View Post

Installing WHS2011 on the HP ProLiant Gen8 MicroServer with AHCI Enabled

Installing WHS2011 on the HP ProLiant Gen8 MicroServer with AHCI Enabled

By: JohnStutsman Figure 1 — Loading WHS2011 onto my Gen8 MicroServer   Last Tuesday night, on HSS255 (“Average Server Size Please, on Home Server Show 255”), we discussed how the average user could install MicroSoft Windows Home Server 2011 on the HP ProLiant Gen8 MicroServer simply with SATA AHCI Enabled in the BIOS, thus avoiding […]

View Post

Average Server Size Please, on Home Server Show 255

Average Server Size Please, on Home Server Show 255

We talk about enthusiast sized servers all the time but how about something a little more normal?  John Stutsman, Christopher Courtney, and Chris Kenney all join in to discuss what could possibly be an “average” server.  Well, they listened to me talk about it! I need to let these guys talk more often.  Never fear, […]

View Post

HP P222/512 FBWC Unboxing/Installation HP ProLiant Gen8 MicroServer

HP P222/512 FBWC Unboxing/Installation HP ProLiant Gen8 MicroServer

By: JohnStutsman      Figure 1 — HP P222/512 FBWC with Low Profile Bracket attached that I made with the help of my Dermel   While it was delayed by the great storm in the Southeast during the end of January, 2014, my HP P222/512 FBWC finally arrived safe and sound in early February. Read […]

View Post

HP’s New Rules to Access Firmware & Driver Downloads

HP’s New Rules to Access Firmware & Driver Downloads

By: John Stutsman   HP has announced a new policy for Firmware Update Access for HP ProLiant Servers. HP Vice President Mary McCoy explained last Friday (2/7/2014) in Customers for Life the new policy: This week, HP announced that effective February 19, 2014, we will provide firmware updates through the HP Support Center only to […]

View Post

Looking at the Thecus N2310, 6TB Drives, & HP Gen 8 Drive Bracket 250

Looking at the Thecus N2310, 6TB Drives, & HP Gen 8 Drive Bracket 250

It’s episode 250 and it’s full of information for you! John Stutsman joins me to talk about the Thecus N2310 a little bit and we try to figure out what to do with a 6TB hard drive. What would you do with a couple? Do you know how much they cost?  Also, a little more […]

View Post

SGDM-SDM Pre-Production Review: HP ProLiant Gen8 MicroServer

SGDM-SDM Pre-Production Review: HP ProLiant Gen8 MicroServer

By: JohnStutsman   I had the good fortune to test out Schoondoggy’s Pre-Production version of his SDM (Schoondoggy Drive Mount) that can be used to mount two additional 2.5” drives or one 3.5” drive inside the HP ProLiant Gen8 MicroServer next to the PSU. I have reviewed the Beta Test version of the SGDM (Schoondoggy Gen8 […]

View Post

HP ProLiant Gen8 MicroServer: Lapping the CPU Heat Sink

HP ProLiant Gen8 MicroServer: Lapping the CPU Heat Sink

By: John Stutsman     Figure 1 – Lapped CPU Heat Sink set to reflect the Intel Zeon E3-1265LV2 and other parts on the System Board of HP ProLiant Gen8 MicroServer   At the completion of HP ProLiant Gen8 MicroServer: Xeon E3-1265LV2 Upgrade I had completed the upgrade and successfully powered on my Gen8 MicroServer.   Figure […]

View Post

HP ProLiant Gen8 MicroServer: Xeon E3-1265LV2 CPU Upgrade

HP ProLiant Gen8 MicroServer: Xeon E3-1265LV2 CPU Upgrade

By: John Stutsman   Figure 1 — My Intel Zeon E3-1265LV2 shortly after it arrived and before it was installed in place of the Celeron G1610T in my HP ProLiant Gen8 MicroServer   When the HP ProLiant Gen8 MicroServers were introduced my attention was caught by the LGA1155 Intel Socket for the Gen8’s CPU offering the […]

View Post

The Schoondoggy Gen8 Drive Mount for the HP ProLiant Gen8 MicroServer First Look

The Schoondoggy Gen8 Drive Mount for the HP ProLiant Gen8 MicroServer First Look

By: John Stutsman Not long ago, Schoondoggy asked a few of us to beta test preproduction versions of his drive mount bracket for the HP ProLiant Gen8 MicroServer. Except for the placement of the holes to attach the Schoondoggy Gen8 Drive Mount (“SGDM”) to the PSU – which was easily fixed with my Dremel – […]

View Post

×

Shop and help out Home Server Show. Drag this box to your BookMarks Bar. Amazon