I doing project studies with cisco nexus 1000v and was wondering if there was someone on these forums with experience on the system.
I am having problems getting the VSM and VEM modules to communicate with each other.
Experiences with Cisco Nexus 1000V?
Started By KrisseZ, Mar 05 2012 09:23 AM
5 replies to this topic
#1
KrisseZ
-
- Members
-
- 86 posts
HSS Star
- LocationFinland
Posted 05 March 2012 - 09:23 AM
[Hydrabox] Windows 7 Ultimate - Intel Core i7 920 @ 3,8 Ghz - Asus P6T Deluxe - 12 Gb 1600 Mhz DDR3 - Intel X25M G2 160 Gb - 2x1 Tb WDM @ Raid 0
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
#2
KrisseZ
-
- Members
-
- 86 posts
HSS Star
- LocationFinland
Posted 08 March 2012 - 06:02 AM
Well in case someone might be interested, I got the darn thing working. Had to demolish my whole vCenter, remove the installed VEM module and start from scratch. Then I put the whole thing back together with the exception of not creating a HA group between the esxi hosts. During the whole process I monitored the switches (Cisco 3560) mac address table output to verify the presence of the correct amount of mac clients on both trunk links.
When I finally got the VEM installed the VSM instantly noticed the VEM present. So could say that a little bit of voodoo is included in the Nexus 1000v setup. Now the only thing left is to figure something to do with it.
When I finally got the VEM installed the VSM instantly noticed the VEM present. So could say that a little bit of voodoo is included in the Nexus 1000v setup. Now the only thing left is to figure something to do with it.
[Hydrabox] Windows 7 Ultimate - Intel Core i7 920 @ 3,8 Ghz - Asus P6T Deluxe - 12 Gb 1600 Mhz DDR3 - Intel X25M G2 160 Gb - 2x1 Tb WDM @ Raid 0
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
#3
ikon
-
- Donating Member
-
- 8,572 posts
HSS Genius
Posted 08 March 2012 - 11:10 AM
So is it time for you to order another can of 'magic smoke'?
If at first you don't succeed, do it like your mother told you.
#4
KrisseZ
-
- Members
-
- 86 posts
HSS Star
- LocationFinland
Posted 08 March 2012 - 01:14 PM
Don't know, but tomorrow I'll keep on battling with it hoping to get something intelligent done with it.
[Hydrabox] Windows 7 Ultimate - Intel Core i7 920 @ 3,8 Ghz - Asus P6T Deluxe - 12 Gb 1600 Mhz DDR3 - Intel X25M G2 160 Gb - 2x1 Tb WDM @ Raid 0
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
[Khronos] Windows 2008 R2 - AMD Athlon II X 2 250 - ASrock N68C-S UCC - 4 Gb 1333 Mhz DDR3 - RR2680 with no proper disks yet. - 4x 3 slot sata backplane
#5
darkside34
-
- Members
-
- 27 posts
HSS Member
Posted 05 July 2012 - 09:30 AM
Best hope it is Cisco © magic smoke.So is it time for you to order another can of 'magic smoke'?
#6
ikon
-
- Donating Member
-
- 8,572 posts
HSS Genius
Posted 06 July 2012 - 01:52 PM
Best hope it is Cisco © magic smoke.
For sure. It'll only cost 10x more than generic magic smoke and require 2 hours of IOS commands to implement
If at first you don't succeed, do it like your mother told you.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
