Jump to content


Photo

Problem booting OS after Highpoint 2680 RAID set up

Started By krom, Dec 11 2011 08:14 AM
2680 raid

  • Please log in to reply
10 replies to this topic

#1 krom

krom

    HSS Pro

  • Donating Member
  • 263 posts
  • LocationWestern New York

Posted 11 December 2011 - 08:14 AM

I'm having a problem booting into my OS since I installed and configured a RAID 5 array with a Highpoint 2680 card. The array creation process went well and the card recognizes the array but right after leaving the 2680 screen during POST all I get is a blinking cursor. If I unhook the drives form the 2680 I can boot just fine. In the system BIOS I have the proper drive designated as the boot drive too. The mobo is a Gigabyte GA-990FXA-UD3. Any thoughts? Thanks.
Main system: AMD Phenom 9600, 4GB RAM, Win 7 Pro, Dell 2407WFP
Main server: AMD Athlon 5050e, 2GB RAM, WHS v1, 9.32TB

#2 krom

krom

    HSS Pro

  • Donating Member
  • 263 posts
  • LocationWestern New York

Posted 11 December 2011 - 10:17 AM

A couple of updates. I did update the 2680 to the latest firmware v1.1 but that didn't help. Also disabled int13 as @Timekills suggested in this earlier post:

http://homeserversho...ue/page__st__20

I didn't notice any speed up during boot on the 2680 screen during post. In any case that didn't help.

I do notice that the array is labeled as uninitialized in the 2680 screen during boot/post. Not sure if that makes a difference but I don't see any place to initialize the array.
Main system: AMD Phenom 9600, 4GB RAM, Win 7 Pro, Dell 2407WFP
Main server: AMD Athlon 5050e, 2GB RAM, WHS v1, 9.32TB

#3 jmwills

jmwills

    HSS Genius

  • Donating Member
  • 5,375 posts
  • LocationHuntsville, AL - Kandahar, AFG

Posted 11 December 2011 - 10:31 AM

Is the board set to AHCI or RAID?
Windows 7 Desktop - Antec 100 Case, Intel D8H67BL, OCZ 550W PSU, Intel i3-530 CPU w/16GB G-Skill DDR3 1333 RAM
Server 2012 - Fractal Arc Midi, CoolerMaster M600 PSU, ASUS P8H67V, Intel i5-2500 CPU w/32GBG-Skill DDR3 1333 RAM, 90 GIG OCZ SSD OS Drive – Roles: Hyper-V (WHS-SharePoint-DC-SQL-Exchange-WSE 2012), Print Server - Rocket RAID 2720 5x2TB
HTPC Build - Silverstone GD05 Case, ASUS P7H55-M PRO, CoolerMaster M600W PSU, Intel i3-530 CPU w/4GB G-Skill DDR3 1333 RAM. OCZ 60GB SSD Drive for the OS with a 120GB WD 2.5" Blue drive for data storage.
Travel Laptop: Dell XPSL502X 15.6"

#4 krom

krom

    HSS Pro

  • Donating Member
  • 263 posts
  • LocationWestern New York

Posted 11 December 2011 - 10:58 AM

If by board you mean the mobo vs. the 2680 then it's set to AHCI...but I'm running the RAID from the 2680 not the motherboard. Do I still need to set it to RAID? The drives attached to the SATA ports on the mother board are not in a RAID configuration.
Main system: AMD Phenom 9600, 4GB RAM, Win 7 Pro, Dell 2407WFP
Main server: AMD Athlon 5050e, 2GB RAM, WHS v1, 9.32TB

#5 jmwills

jmwills

    HSS Genius

  • Donating Member
  • 5,375 posts
  • LocationHuntsville, AL - Kandahar, AFG

Posted 11 December 2011 - 11:16 AM

Does the 2680 card show in the boot order? If so, put the SATA drive in the first position.
Windows 7 Desktop - Antec 100 Case, Intel D8H67BL, OCZ 550W PSU, Intel i3-530 CPU w/16GB G-Skill DDR3 1333 RAM
Server 2012 - Fractal Arc Midi, CoolerMaster M600 PSU, ASUS P8H67V, Intel i5-2500 CPU w/32GBG-Skill DDR3 1333 RAM, 90 GIG OCZ SSD OS Drive – Roles: Hyper-V (WHS-SharePoint-DC-SQL-Exchange-WSE 2012), Print Server - Rocket RAID 2720 5x2TB
HTPC Build - Silverstone GD05 Case, ASUS P7H55-M PRO, CoolerMaster M600W PSU, Intel i3-530 CPU w/4GB G-Skill DDR3 1333 RAM. OCZ 60GB SSD Drive for the OS with a 120GB WD 2.5" Blue drive for data storage.
Travel Laptop: Dell XPSL502X 15.6"

#6 krom

krom

    HSS Pro

  • Donating Member
  • 263 posts
  • LocationWestern New York

Posted 11 December 2011 - 11:22 AM

My boot drive is an OCZ Vertex 2 and it is set in the motherboard BIOS as the boot device.
Main system: AMD Phenom 9600, 4GB RAM, Win 7 Pro, Dell 2407WFP
Main server: AMD Athlon 5050e, 2GB RAM, WHS v1, 9.32TB

#7 krom

krom

    HSS Pro

  • Donating Member
  • 263 posts
  • LocationWestern New York

Posted 11 December 2011 - 01:29 PM

Interesting update, I had a separate spinning disk connected to the mobo sata ports (this was my d: drive). Since nothing else was working I decided to disconnect it (I was clutching at straws at this point). That took care of the problem. I'm not sure why that made a difference but it did.
Main system: AMD Phenom 9600, 4GB RAM, Win 7 Pro, Dell 2407WFP
Main server: AMD Athlon 5050e, 2GB RAM, WHS v1, 9.32TB

#8 pcdoc

pcdoc

    HSS Legend

  • Moderators
  • 3,593 posts
  • LocationLos Angeles, California

Posted 11 December 2011 - 10:21 PM

That is pretty strange, but hey, in PC's anything is possible. Glad it fixed your problem.

Main Server - WHS 2011, Core I5-2500, 12T RAID 5 (5x3T) + 2T of Mirror + 2T of backup
Second Server - 2008R2, Core I5-2500, 12T RAID 5
Main Systems - Core I7-2600k, 16 Gigs DDR3-1600, 180 Gig Intel 330 SSD Max IOPS 240 Gig Vertex 3, 2T Sata 3 for local Backup
Other systems - Core I7-2600, Core I3-530's, Core I5-2500, Core I7-920, Core I3-2100, and G620 (see System List)
My Blogs - The Docs Blog and Tablet Resource
BYOB Videos - TheBYOBPodcast
For a complete system List: Computer Systems

#9 timekills

timekills

    HSS Advanced

  • Donating Member
  • 616 posts
  • LocationFBTX

Posted 12 December 2011 - 12:02 PM

Not sure if the RAID card was a red herring given what fixed the problem, but another way to speed up your boot time and prevent the RAID card from being checked for boot is to enable the Intel RAID option in BIOS, even if you're not using it as RAID. It will bypass the RAID card check. Of course, that also means you'd have to disable if you needed to get into the RAID setup before the OS booted.

#10 jmwills

jmwills

    HSS Genius

  • Donating Member
  • 5,375 posts
  • LocationHuntsville, AL - Kandahar, AFG

Posted 12 December 2011 - 12:04 PM

I'm thinking there was a boot partition on the D drive.
Windows 7 Desktop - Antec 100 Case, Intel D8H67BL, OCZ 550W PSU, Intel i3-530 CPU w/16GB G-Skill DDR3 1333 RAM
Server 2012 - Fractal Arc Midi, CoolerMaster M600 PSU, ASUS P8H67V, Intel i5-2500 CPU w/32GBG-Skill DDR3 1333 RAM, 90 GIG OCZ SSD OS Drive – Roles: Hyper-V (WHS-SharePoint-DC-SQL-Exchange-WSE 2012), Print Server - Rocket RAID 2720 5x2TB
HTPC Build - Silverstone GD05 Case, ASUS P7H55-M PRO, CoolerMaster M600W PSU, Intel i3-530 CPU w/4GB G-Skill DDR3 1333 RAM. OCZ 60GB SSD Drive for the OS with a 120GB WD 2.5" Blue drive for data storage.
Travel Laptop: Dell XPSL502X 15.6"

#11 ikon

ikon

    HSS Genius

  • Donating Member
  • 8,874 posts

Posted 14 December 2011 - 06:07 PM

Would be interesting to try the D drive and the RR connected alternately, to confirm the system can boot if only 1 of them is connected, and then with both connected again, to confirm there is some interaction going on that's causing the boot issue.

If at first you don't succeed, do it like your mother told you.

Back to Hard Drive's, SSD's, Controllers



Also tagged with one or more of these keywords: 2680, raid

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. HomeServerShow Forums
  2. → The BYOB Podcast and Hardware Forum
  3. → Hardware Talk
  4. → Hard Drive's, SSD's, Controllers