• Similar Content

    • Joe_Miner
      By Joe_Miner
      HP ProLiant ML10v2 i3-4150 $169.99 with Promo Code EMCREBR27 after #30 MIR https://www.newegg.com/Product/Product.aspx?Item=2RC-001A-000S2&Tpk=2RC-001A-000S2 
    • Joe_Miner
      By Joe_Miner
      It works and the install was relatively easy.  I installed Windows 10 Pro x64 on HPE ProLiant ML30 Gen9
       
       
      I used iLO4 to remote into the ML30 Gen9 and began to install Windows 10 Pro x64 manually (i.e. without using IP) in the following general steps:
      Since I had just recently done steps 1-6 not long ago I skipped down and began with Step 5 then skipped to 7 thru 16 below.
      Download Service Pack for ProLiant (SPP) from Hewlett Packard Enterprise Support Center – Drivers & Software – the current version is 2016.10.0 (24 Oct 2016) – check also threads about SPP at HSS Forum MS Gen8 Load the SPP ISO in “virtual drives” in remote desktop of iLO4 Boot the ML30 Gen9 – with no drives in the ML30 Gen9 in my case – and let SPP run automatically and update all firmware. Shut down the ML30 Gen9 Next: I removed the Samsung 840 Pro 256GB that I had loaded Server 2016 on (giving me the flexibility to switch OS’s by switching SSD’s in the ML30 Gen9) and loaded another Samsung 840 Pro 256GB into drive 1 of the Icy Dock ToughArmor MB994SP-4SB-1 Go to the Hewlett Packard Enterprise Support Center – Drivers & Software – and download the file cp028631.exe that is the Dynamic Smart Array B140i Controller Driver for 64-bit Microsoft Windows Server 2012/2016 Editions (This is the same driver I plan to use for a manual installation of Windows 10 64-bit Pro in the ML30 Gen9 – the HPE Drivers & Software site does not have Drivers & Software for non-server OS’s) – the current version is 62.12.0.64 (24 Oct 2016) Extract the files in cp028631.exe and load those into a file folder that I then attach/load in “virtual drives” of remote desktop of iLO4 (during Windows install this will be the folder I browse to so that Windows 10 can pull in the driver and see the Samsung 840 Pro Load the Windows 10 Pro x64 ISO in “virtual drives” of remote desktop of iLO4 Boot the ML30 Gen9 During boot go into IP (press F10) and select SSA (Smart Storage Administrator) In SSA I set up the Samsung 840 Pro as a single drive RAID0 to be used as my OS drive. Exit SSA & IP and Restart the ML30 Gen9 Proceed with the normal Windows 10 Pro x64 install – During install Windows 10 will ask for location of drivers so it can see the drive(s) – in browse lead it to the location to the file folder of B140i driver(s) in the “virtual drives” C: -- if your OS drive had been previously formatted as MBR you will have to delete that so it can be formatted as GPT.  After Windows 10 is installed and updated – reattach SPP ISO in remote desktop of iLO4 In the Windows desktop go to the SPP ISO in File Explorer and Execute the Batch file for HPSUM (i.e. execute: launch_hpsum.bat as Administrator) – I chose “Localhost Guided Update” – Automatic Mode After running HPSUM (and rebooting) the HPE software installed will be visible in iLO4.  Enjoy!
Joe_Miner

Icy Dock MB994SP-4SB-1 ToughArmor in HPE ProLiant ML30 Gen9

3 posts in this topic

I installed a ToughArmor into my ML30 Gen9's top 5.25" bay - going to use it for connecting drive to SATA III Ports 5 & 6 without having to tear apart the case every time I rebuild & gives me the option down the road if I add a Controller card for adding additional drives.

 

Looks good too

 

Here it is on the Right (the ML10v2 on the left has an ExpressCage MB326SP-B in it)

 

Figure09.jpg

2 people like this

Share this post


Link to post
Share on other sites

Installed 1TB VelociRaptor in ToughArmor

 

Capture02_zpsqtqrtxon.jpg

 

 

 

Capture03_zpsgyl5nt5q.jpg

 

 

 

 

Capture04_zpsfgs2wyt6.jpg

 

 

Capture_zpszap2cmpc.jpg

 

 

I install the 1TB VelociRaptor in Icy Dock ToughArmor MB994SP-4SB-1 located in one of two available 5.25” drive bays in the top of the HPE ProLiant ML30 Gen9 discussed earlier in the Blog.  Everything working well.  

Edited by Joe_Miner

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now