• Similar Content

    • Joe_Miner
      By Joe_Miner
      I installed a ToughArmor into my ML30 Gen9's top 5.25" bay - going to use it for connecting drive to SATA III Ports 5 & 6 without having to tear apart the case every time I rebuild & gives me the option down the road if I add a Controller card for adding additional drives.
       
      Looks good too
       
      Here it is on the Right (the ML10v2 on the left has an ExpressCage MB326SP-B in it)
       

    • Joe_Miner
      By Joe_Miner
      I decided to try using an Icy Dock MB994SP-4SB-1 in my ProLiant ML30 Gen9 to hold my two SSDs that I have in a RAID0 running Server 2012R2
       
      Seems to work pretty well so far -- should work too in the ML10v2 though I haven't tried it yet